linux-mips
[Top] [All Lists]

Re: Problems booting 3.0.3 kernel on Octeon CN58XX board

To: Jason Kwon <jason.kwon@ericsson.com>
Subject: Re: Problems booting 3.0.3 kernel on Octeon CN58XX board
From: David Daney <david.daney@cavium.com>
Date: Thu, 18 Aug 2011 18:05:38 -0700
Cc: linux-mips@linux-mips.org
In-reply-to: <4E4DA9DA.60305@ericsson.com>
References: <4E4DA9DA.60305@ericsson.com>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.15) Gecko/20101027 Fedora/3.0.10-1.fc12 Thunderbird/3.0.10
On 08/18/2011 05:10 PM, Jason Kwon wrote:
Attempting to boot a 3.0.3 kernel on a CN58XX board produced the
following oops:

CPU 4 Unable to handle kernel paging request at virtual address
0000000001c00000, epc == ffffffff811aa9f4, ra == ffffffff811aaa98
Oops[#1]:
Cpu 4
$ 0 : 0000000000000000 0000000010008ce0 ffffffff821d2b80 0000000001c00000
$ 4 : 0000000001c00038 000000000000017c 0000000000080000 0000000000080072
$ 8 : 0000000000000008 0000000000000002 0000000000000003 a800000002284520
$12 : 0000000000000002 ffffffff8186ee80 ffffffffffffff80 0000000000000030
$16 : 0000000000080072 0000000000000001 0000000001bfa8f0 0000000001bfa928
$20 : a800000003aff8f0 00000000000f0000 ffffffff8186ee80 ffffffff821d2a80
$24 : 0000000000000001 0000000000000038
$28 : a80000041fc48000 a80000041fc4bd90 fffffffffffffffc ffffffff811aaa98
Hi : 0000000000000000
Lo : 0000000000000000
epc : ffffffff811aa9f4 setup_per_zone_wmarks+0x19c/0x2d8
Not tainted
ra : ffffffff811aaa98 setup_per_zone_wmarks+0x240/0x2d8
Status: 10008ce2 KX SX UX KERNEL EXL
Cause : 40808408
BadVA : 0000000001c00000
PrId : 000d0301 (Cavium Octeon+)
Modules linked in:
Process swapper (pid: 1, threadinfo=a80000041fc48000,
task=a80000041fc44038, tls=0000000000000000)
Stack : 0000000000000000 000000000006f75d ffffffff8186eec0 0000000000000001
0000000000000547 ffffffff81825598 ffffffff81a80000 ffffffff818b3e68
ffffffff818a40ac 0000000000000000 ffffffff81a80000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 ffffffff818a40f0
ffffffff81a80000 ffffffff81100438 ffffffff818b4198 ffffffff818b3e68
ffffffff818b46c8 0000000000000000 0000000000000000 ffffffff818721d0
0000000000000000 0000000000000000 0000000000000000 ffffffff81109bb0
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 ffffffff818720f8
0000000000000000 0000000000000000 0000000000000000 0000000000000000
...
Call Trace:
[<ffffffff811aa9f4>] setup_per_zone_wmarks+0x19c/0x2d8
[<ffffffff818a40f0>] init_per_zone_wmark_min+0x44/0xe0
[<ffffffff81100438>] do_one_initcall+0x38/0x160
[<ffffffff818721d0>] kernel_init+0xd8/0x178
[<ffffffff81109bb0>] kernel_thread_helper+0x10/0x18
[...]

Weird, I get the same thing on cn5860 and cn3860.

cn5750 and cn5020 are fine.

Normally I test on my ebh5610 board (cn5750) so I didn't notice this.

It may be caused by holes in the memory map. Earlier I posted patches to set the memory as present:

http://patchwork.linux-mips.org/patch/1988/
http://patchwork.linux-mips.org/patch/1989/
http://patchwork.linux-mips.org/patch/1990/

One or more of those might help, but it is just a guess at this point.

I might take a look next week.

David Daney



<Prev in Thread] Current Thread [Next in Thread>