Hello Hauke,
On Thursday 30 June 2011 00:11:56 Hauke Mehrtens wrote:
> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
> ---
> arch/mips/Kconfig | 8 +-------
> arch/mips/bcm47xx/Kconfig | 18 ++++++++++++++++++
> arch/mips/bcm47xx/Makefile | 3 ++-
> arch/mips/bcm47xx/gpio.c | 6 ++++++
> arch/mips/bcm47xx/nvram.c | 4 ++++
> arch/mips/bcm47xx/serial.c | 4 ++++
> arch/mips/bcm47xx/setup.c | 8 ++++++++
> arch/mips/bcm47xx/time.c | 2 ++
> arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 4 ++++
> arch/mips/include/asm/mach-bcm47xx/gpio.h | 12 ++++++++++++
> arch/mips/pci/pci-bcm47xx.c | 6 ++++++
> drivers/watchdog/bcm47xx_wdt.c | 4 ++++
> 12 files changed, 71 insertions(+), 8 deletions(-)
> create mode 100644 arch/mips/bcm47xx/Kconfig
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 45f7aac..dcb3675 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -91,15 +91,8 @@ config BCM47XX
> select DMA_NONCOHERENT
> select HW_HAS_PCI
> select IRQ_CPU
> - select SYS_HAS_CPU_MIPS32_R1
> select SYS_SUPPORTS_32BIT_KERNEL
> select SYS_SUPPORTS_LITTLE_ENDIAN
> - select SSB
> - select SSB_DRIVER_MIPS
> - select SSB_DRIVER_EXTIF
> - select SSB_EMBEDDED
> - select SSB_B43_PCI_BRIDGE if PCI
> - select SSB_PCICORE_HOSTMODE if PCI
> select GENERIC_GPIO
> select SYS_HAS_EARLY_PRINTK
> select CFE
> @@ -788,6 +781,7 @@ endchoice
>
> source "arch/mips/alchemy/Kconfig"
> source "arch/mips/ath79/Kconfig"
> +source "arch/mips/bcm47xx/Kconfig"
> source "arch/mips/bcm63xx/Kconfig"
> source "arch/mips/jazz/Kconfig"
> source "arch/mips/jz4740/Kconfig"
> diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
> new file mode 100644
> index 0000000..443d918
> --- /dev/null
> +++ b/arch/mips/bcm47xx/Kconfig
> @@ -0,0 +1,18 @@
> +if BCM47XX
> +
> +config BCM47XX_SSB
> + bool "BCMA Support for Broadcom BCM47XX"
Should not this be:
"SSB support for Broadcom BCM47XX"?
> + select SYS_HAS_CPU_MIPS32_R1
> + select SSB
> + select SSB_DRIVER_MIPS
> + select SSB_DRIVER_EXTIF
> + select SSB_EMBEDDED
> + select SSB_B43_PCI_BRIDGE if PCI
> + select SSB_PCICORE_HOSTMODE if PCI
> + default y
> + help
> + Add support for old Broadcom BCM47xx boards with Sonics Silicon
> Backplane support bus. +
> + This will generate an image with support for SSB and MIPS32 R2
> instruction set. +
> +endif
> diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
> index 7465e8a..4add173 100644
> --- a/arch/mips/bcm47xx/Makefile
> +++ b/arch/mips/bcm47xx/Makefile
> @@ -3,4 +3,5 @@
> # under Linux.
> #
|