linux-mips
[Top] [All Lists]

[PATCH V2 06/10] MIPS: lantiq: add NOR flash support

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH V2 06/10] MIPS: lantiq: add NOR flash support
From: John Crispin <blogic@openwrt.org>
Date: Tue, 1 Mar 2011 17:13:22 +0100
Cc: John Crispin <blogic@openwrt.org>, Ralph Hempel <ralph.hempel@lantiq.com>, David Woodhouse <dwmw2@infradead.org>, Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>, linux-mips@linux-mips.org, linux-mtd@lists.infradead.org
In-reply-to: <1298996006-15960-1-git-send-email-blogic@openwrt.org>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1298996006-15960-1-git-send-email-blogic@openwrt.org>
Sender: linux-mips-bounce@linux-mips.org
NOR flash is attached to the same EBU (External Bus Unit) as PCI. As described
in the PCI patch, the EBU is a little buggy, resulting in the upper and lower
16 bit of the data on a 32 bit read are swapped. (essentially we have a addr^=2)

To work around this we do a addr^=2 during the probe. Once probed we adapt
cfi->addr_unlock1 and cfi->addr_unlock2 to represent the endianess bug.

Changes in V2
* handle the endianess bug inside the map code and not in the generic cfi code
* remove the addr swizzle patch

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-mtd@lists.infradead.org
---
 drivers/mtd/maps/Kconfig  |    7 ++
 drivers/mtd/maps/Makefile |    1 +
 drivers/mtd/maps/lantiq.c |  186 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 194 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mtd/maps/lantiq.c

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 5d37d31..587468e 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -260,6 +260,13 @@ config MTD_BCM963XX
          Support for parsing CFE image tag and creating MTD partitions on
          Broadcom BCM63xx boards.
 
+config MTD_LANTIQ
+       bool "Lantiq SoC NOR support"
+       depends on LANTIQ && MTD_PARTITIONS
+       help
+         Support for NOR flash chips on Lantiq SoC. The Chips are connected
+         to the SoCs EBU (External Bus Unit)
+
 config MTD_DILNETPC
        tristate "CFI Flash device mapped on DIL/Net PC"
        depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && 
BROKEN
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index c7869c7..bb2ce2f 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -59,3 +59,4 @@ obj-$(CONFIG_MTD_RBTX4939)    += rbtx4939-flash.o
 obj-$(CONFIG_MTD_VMU)          += vmu-flash.o
 obj-$(CONFIG_MTD_GPIO_ADDR)    += gpio-addr-flash.o
 obj-$(CONFIG_MTD_BCM963XX)     += bcm963xx-flash.o
+obj-$(CONFIG_MTD_LANTIQ)       += lantiq.o
diff --git a/drivers/mtd/maps/lantiq.c b/drivers/mtd/maps/lantiq.c
new file mode 100644
index 0000000..a630804
--- /dev/null
+++ b/drivers/mtd/maps/lantiq.c
@@ -0,0 +1,186 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/cfi.h>
+#include <linux/magic.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+
+/* the NOR flash is connected to the same external bus unit (EBU) as PCI
+   to make PCI work we need to enable the endianess swapping of the addr
+   written to the EBU. this however has some limitations and breaks when
+   using NOR. it does not really matter if the onflash data is in a swapped
+   order, however cfi sequences also fail. to workaround this we need to use
+   a complex map. We essentially software swap all addresses during probe
+   and then swizzle the unlock addresses.
+ */
+static int ltq_mtd_probing;
+
+static map_word
+ltq_read16(struct map_info *map, unsigned long adr)
+{
+       unsigned long flags;
+       map_word temp;
+       if (ltq_mtd_probing)
+               adr ^= 2;
+       spin_lock_irqsave(&ebu_lock, flags);
+       temp.x[0] = *((__u16 *)(map->virt + adr));
+       spin_unlock_irqrestore(&ebu_lock, flags);
+       return temp;
+}
+
+static void
+ltq_write16(struct map_info *map, map_word d, unsigned long adr)
+{
+       unsigned long flags;
+       if (ltq_mtd_probing)
+               adr ^= 2;
+       spin_lock_irqsave(&ebu_lock, flags);
+       *((__u16 *)(map->virt + adr)) = d.x[0];
+       spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+void
+ltq_copy_from(struct map_info *map, void *to,
+       unsigned long from, ssize_t len)
+{
+       unsigned char *p;
+       unsigned char *to_8;
+       unsigned long flags;
+       spin_lock_irqsave(&ebu_lock, flags);
+       from = (unsigned long) (map->virt + from);
+       p = (unsigned char *) from;
+       to_8 = (unsigned char *) to;
+       while (len--)
+               *to_8++ = *p++;
+       spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+void
+ltq_copy_to(struct map_info *map, unsigned long to,
+       const void *from, ssize_t len)
+{
+       unsigned char *p =  (unsigned char *)from;
+       unsigned char *to_8;
+       unsigned long flags;
+       spin_lock_irqsave(&ebu_lock, flags);
+       to += (unsigned long) map->virt;
+       to_8 = (unsigned char *)to;
+       while (len--)
+               *p++ = *to_8++;
+       spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static const char *part_probe_types[] = {
+       "cmdlinepart", NULL };
+
+static struct map_info ltq_map = {
+       .name = "ltq_nor",
+       .bankwidth = 2,
+       .read = ltq_read16,
+       .write = ltq_write16,
+       .copy_from = ltq_copy_from,
+       .copy_to = ltq_copy_to,
+};
+
+static int
+ltq_mtd_probe(struct platform_device *pdev)
+{
+       struct physmap_flash_data *ltq_mtd_data =
+               (struct physmap_flash_data *) dev_get_platdata(&pdev->dev);
+       struct mtd_info *ltq_mtd = NULL;
+       struct mtd_partition *parts = NULL;
+       struct resource *res = 0;
+       int nr_parts = 0;
+       struct cfi_private *cfi;
+
+#ifdef CONFIG_SOC_TYPE_XWAY
+       ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
+#endif
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               dev_err(&pdev->dev, "failed to get memory resource");
+               return -ENOENT;
+       }
+       res = devm_request_mem_region(&pdev->dev, res->start,
+               resource_size(res), dev_name(&pdev->dev));
+       if (!res) {
+               dev_err(&pdev->dev, "failed to request mem resource");
+               return -EBUSY;
+       }
+
+       ltq_map.phys = res->start;
+       ltq_map.size = resource_size(res);
+       ltq_map.virt = devm_ioremap_nocache(&pdev->dev, ltq_map.phys,
+               ltq_map.size);
+       if (!ltq_map.virt) {
+               dev_err(&pdev->dev, "failed to ioremap!\n");
+               return -EIO;
+       }
+
+       ltq_mtd_probing = 1;
+       ltq_mtd = (struct mtd_info *) do_map_probe("cfi_probe", &ltq_map);
+       ltq_mtd_probing = 0;
+       if (!ltq_mtd) {
+               iounmap(ltq_map.virt);
+               dev_err(&pdev->dev, "probing failed\n");
+               return -ENXIO;
+       }
+       ltq_mtd->owner = THIS_MODULE;
+
+       cfi = (struct cfi_private *)ltq_map.fldrv_priv;
+       cfi->addr_unlock1 ^= 1;
+       cfi->addr_unlock2 ^= 1;
+
+       nr_parts = parse_mtd_partitions(ltq_mtd, part_probe_types, &parts, 0);
+       if (nr_parts > 0) {
+               dev_info(&pdev->dev,
+                       "using %d partitions from cmdline", nr_parts);
+       } else {
+               nr_parts = ltq_mtd_data->nr_parts;
+               parts = ltq_mtd_data->parts;
+       }
+
+       add_mtd_partitions(ltq_mtd, parts, nr_parts);
+       return 0;
+}
+
+static struct platform_driver ltq_mtd_driver = {
+       .probe = ltq_mtd_probe,
+       .driver = {
+               .name = "ltq_nor",
+               .owner = THIS_MODULE,
+       },
+};
+
+int __init
+init_ltq_mtd(void)
+{
+       int ret = platform_driver_register(&ltq_mtd_driver);
+       if (ret)
+               printk(KERN_INFO "ltq_nor: error registering platfom driver");
+       return ret;
+}
+
+module_init(init_ltq_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC NOR");
-- 
1.7.2.3


<Prev in Thread] Current Thread [Next in Thread>