[PATCH] MIPS: Octeon: Don't request interrupts for unused IPI mailbox bits.

[David Daney <ddaney@caviumnetworks.com>]

We only use the three low-order mailbox bits.  Leave the upper bits
alone for possible use by drivers and other software.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
---
 arch/mips/cavium-octeon/smp.c |   15 +++++++--------
 1 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index ba78b21..716fae6 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -37,7 +37,7 @@ static irqreturn_t mailbox_interrupt(int irq, void *dev_id)
        uint64_t action;
 
        /* Load the mailbox register to figure out what we're supposed to do */
-       action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid));
+       action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid)) & 0xffff;
 
        /* Clear the mailbox to clear the interrupt */
        cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), action);
@@ -200,16 +200,15 @@ void octeon_prepare_cpus(unsigned int max_cpus)
        if (labi->labi_signature != LABI_SIGNATURE)
                panic("The bootloader version on this board is incorrect.");
 #endif
-
-       cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff);
+       /*
+        * Only the low order mailbox bits are used for IPIs, leave
+        * the other bits alone.
+        */
+       cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
        if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
-                       "mailbox0", mailbox_interrupt)) {
+                       "SMP-IPI", mailbox_interrupt)) {
                panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
        }
-       if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_DISABLED,
-                       "mailbox1", mailbox_interrupt)) {
-               panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n");
-       }
 }
 
 /**
-- 
1.7.2.3