SMTC support status in latest git head.

["Anoop P.A." <Anoop_P.A@pmc-sierra.com>]

Hi list,

Any body is aware of SMTC support status in latest git sources?. I have tried 
testing SMTC kernel for malta in qemu / OVP without any success ( emulators not 
working for 34k). 

I am trying to bring up SMTC Linux support for an mips34K based soc ( MSP71xx 
family).

While booting , kernel getting hung on calibrate loop delay. I am getting only 
one interrupt from timer. With similar smtc platform support file (  changed to 
map smp_ops structure)  2.6.24-stable branch kernel ( where latest timer 
structure introduced) boots fine. 

[    0.000000] Linux version 2.6.37-rc1-pmc-00197-g5bfd3ba-dirty 
(paanoop1@paanoop1-desktop) (gcc version 4.5.1 (GCC) ) #168 SMP PREEMPT Wed Dec 
8 19:19:490
[    0.000000] DSPRAM0: PA=1c100000,Size=00008000,enabled
[    0.000000] UART clock set to 50000000
[    0.000000] CPU revision is: 00019548 (MIPS 34Kc)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 00001000 @ 00000000 (reserved)
[    0.000000]  memory: 000ff000 @ 00001000 (usable)
[    0.000000]  memory: 003f2000 @ 00100000 (reserved)
[    0.000000]  memory: 0fad9200 @ 004f2000 (usable)
[    0.000000] Wasting 32 bytes for tracking 1 unused pages
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0000ffcb
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000ffcb
[    0.000000] 6 available secondary CPU TC(s)
[    0.000000] PERCPU: Embedded 7 pages/cpu @81203000 s6464 r8192 d14016 u32768
[    0.000000] pcpu-alloc: s6464 r8192 d14016 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 64971
[    0.000000] Kernel command line: console=ttyS0,57600
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 
bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 254360k/257888k available (3081k kernel code, 3528k 
reserved, 653k data, 200k init, 0k highmem)
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000] NR_IRQS:128
[    0.000000] console [ttyS0] enabled
[    0.000000] Clock rate set to 600000000
[    0.000000] Calibrating delay loop...

Any idea to debug the issue ?.

Thanks,
Anoop