linux-mips
[Top] [All Lists]

[PATCH 17/18] MIPS: ath79: add initial support for the Atheros AP81 refe

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH 17/18] MIPS: ath79: add initial support for the Atheros AP81 reference board
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 23 Nov 2010 16:06:39 +0100
Cc: linux-mips@linux-mips.org, kaloz@openwrt.org, "Luis R. Rodriguez" <lrodriguez@atheros.com>, Cliff Holden <Cliff.Holden@Atheros.com>, Gabor Juhos <juhosg@openwrt.org>
In-reply-to: <1290524800-21419-1-git-send-email-juhosg@openwrt.org>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1290524800-21419-1-git-send-email-juhosg@openwrt.org>
Sender: linux-mips-bounce@linux-mips.org
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
---

Changes since RFC:
    - don't use 'default n' for the ATH79_MACH_AP81 Kconfig option

 arch/mips/ath79/Kconfig     |   11 +++++
 arch/mips/ath79/Makefile    |    1 +
 arch/mips/ath79/mach-ap81.c |   93 +++++++++++++++++++++++++++++++++++++++++++
 arch/mips/ath79/machtypes.h |    1 +
 4 files changed, 106 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/ath79/mach-ap81.c

diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 5d67942..1912d54 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -2,6 +2,17 @@ if ATH79
 
 menu "Atheros AR71XX/AR724X/AR913X machine selection"
 
+config ATH79_MACH_AP81
+       bool "Atheros AP81 reference board"
+       select SOC_AR913X
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_SPI
+       select ATH79_DEV_USB
+       help
+         Say 'Y' here if you want your kernel to support the
+         Atheros AP81 reference board.
+
 config ATH79_MACH_PB44
        bool "Atheros PB44 reference board"
        select SOC_AR71XX
diff --git a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile
index 494d106..1b111d8 100644
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -24,4 +24,5 @@ obj-$(CONFIG_ATH79_DEV_USB)           += dev-usb.o
 #
 # Machines
 #
+obj-$(CONFIG_ATH79_MACH_AP81)          += mach-ap81.o
 obj-$(CONFIG_ATH79_MACH_PB44)          += mach-pb44.o
diff --git a/arch/mips/ath79/mach-ap81.c b/arch/mips/ath79/mach-ap81.c
new file mode 100644
index 0000000..9cfaff3
--- /dev/null
+++ b/arch/mips/ath79/mach-ap81.c
@@ -0,0 +1,93 @@
+/*
+ *  Atheros AP81 board support
+ *
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+
+#define AP81_GPIO_LED_STATUS   1
+#define AP81_GPIO_LED_AOSS     3
+#define AP81_GPIO_LED_WLAN     6
+#define AP81_GPIO_LED_POWER    14
+
+#define AP81_GPIO_BTN_SW4      12
+#define AP81_GPIO_BTN_SW1      21
+
+#define AP81_BUTTONS_POLL_INTERVAL     20
+
+static struct gpio_led ap81_leds_gpio[] __initdata = {
+       {
+               .name           = "ap81:green:status",
+               .gpio           = AP81_GPIO_LED_STATUS,
+               .active_low     = 1,
+       }, {
+               .name           = "ap81:amber:aoss",
+               .gpio           = AP81_GPIO_LED_AOSS,
+               .active_low     = 1,
+       }, {
+               .name           = "ap81:green:wlan",
+               .gpio           = AP81_GPIO_LED_WLAN,
+               .active_low     = 1,
+       }, {
+               .name           = "ap81:green:power",
+               .gpio           = AP81_GPIO_LED_POWER,
+               .active_low     = 1,
+       }
+};
+
+static struct gpio_button ap81_gpio_buttons[] __initdata = {
+       {
+               .desc           = "sw1",
+               .type           = EV_KEY,
+               .code           = BTN_0,
+               .threshold      = 3,
+               .gpio           = AP81_GPIO_BTN_SW1,
+               .active_low     = 1,
+       } , {
+               .desc           = "sw4",
+               .type           = EV_KEY,
+               .code           = BTN_1,
+               .threshold      = 3,
+               .gpio           = AP81_GPIO_BTN_SW4,
+               .active_low     = 1,
+       }
+};
+
+static struct spi_board_info ap81_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "m25p64",
+       }
+};
+
+static struct ath79_spi_platform_data ap81_spi_data = {
+       .bus_num        = 0,
+       .num_chipselect = 1,
+};
+
+static void __init ap81_setup(void)
+{
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
+                                ap81_leds_gpio);
+       ath79_register_gpio_buttons(-1, AP81_BUTTONS_POLL_INTERVAL,
+                                   ARRAY_SIZE(ap81_gpio_buttons),
+                                   ap81_gpio_buttons);
+       ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+                          ARRAY_SIZE(ap81_spi_info));
+       ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
+            ap81_setup);
diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h
index a796fa3..3940fe4 100644
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -16,6 +16,7 @@
 
 enum ath79_mach_type {
        ATH79_MACH_GENERIC = 0,
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
        ATH79_MACH_PB44,                /* Atheros PB44 reference board */
 };
 
-- 
1.7.2.1


<Prev in Thread] Current Thread [Next in Thread>