linux-mips
[Top] [All Lists]

[PATCH] MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH] MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Thu, 11 Nov 2010 19:08:53 +0100
Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>
In-reply-to: <1289498933-12836-1-git-send-email-lars@metafoo.de>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1289498933-12836-1-git-send-email-lars@metafoo.de>
Sender: linux-mips-bounce@linux-mips.org
Now that the mtd core supports more then 64 ecc bytes we can use it instead of
some a custom hack in the jz4740 nand driver.
This patches sets the ecc pos fields of the ecc_layout of the qi_lb60 board.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
 arch/mips/jz4740/board-qi_lb60.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)
---
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 05297ef..3a41014 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -50,14 +50,14 @@ static bool is_avt2;
 
 /* NAND */
 static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
-/*     .eccbytes = 36,
+       .eccbytes = 36,
        .eccpos = {
                6,  7,  8,  9,  10, 11, 12, 13,
                14, 15, 16, 17, 18, 19, 20, 21,
                22, 23, 24, 25, 26, 27, 28, 29,
                30, 31, 32, 33, 34, 35, 36, 37,
                38, 39, 40, 41
-       },*/
+       },
        .oobfree = {
                { .offset = 2, .length = 4 },
                { .offset = 42, .length = 22 }
@@ -86,7 +86,7 @@ static struct mtd_partition qi_lb60_partitions_1gb[] = {
 };
 
 static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
-/*     .eccbytes = 72,
+       .eccbytes = 72,
        .eccpos = {
                12, 13, 14, 15, 16, 17, 18, 19,
                20, 21, 22, 23, 24, 25, 26, 27,
@@ -97,7 +97,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
                60, 61, 62, 63, 64, 65, 66, 67,
                68, 69, 70, 71, 72, 73, 74, 75,
                76, 77, 78, 79, 80, 81, 82, 83
-       },*/
+       },
        .oobfree = {
                { .offset = 2, .length = 10 },
                { .offset = 84, .length = 44 },
-- 
1.5.6.5


<Prev in Thread] Current Thread [Next in Thread>