[Top] [All Lists]

Re: zboot for brcm

To: Waldemar Brodkorb <>
Subject: Re: zboot for brcm
From: wu zhangjin <>
Date: Thu, 17 Jun 2010 20:20:49 +0800
Cc: Ralf Baechle <>, linux-mips <>
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed;; s=gamma; h=domainkey-signature:mime-version:received:received:in-reply-to :references:date:message-id:subject:from:to:cc:content-type; bh=AKgXbGSU5hFTtpWMkUHnqKs0wz8z35JpQxoDFeam3H0=; b=x4rJrSvdE8PWMFgZWW3Bme1ZpQkFae3ySjAddURRQ0IelbatBLeHpu/dfJnJBs7MG8 I7z0s+sFR/KHFFYhxlj3krj0lc1Vi0RiXc+s3hkz5XNwmdoD2IdfP4NYlhyGgwt+PaBP tGFln+f9mNUyV5ThZknhXlizNNVBEP02aSI3Y=
Domainkey-signature: a=rsa-sha1; c=nofws;; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=C6+dwBUgiywIL44BxFfFayHwzbStufA1ZVSaTkJ7Opqd6Np2gZM63/VlKb6c1bfggZ 7WK49P5jkL1hcCXjLw7SmTuqfwbl2AxFqDlSHjANrfmAtZTYlJOMUXy6gqFez0yDxq6s fH3WLcqoX06DnQ5VkKeVm82AJSLW9ZaN29xvo=
In-reply-to: <1276179278.21482.16.camel@localhost>
References: <> <1276099374.4510.13.camel@localhost> <> <1276179278.21482.16.camel@localhost>

I just got a bcm1250a board, it also uses the CFE as the bootloader, I
compiled a compressed vmlinuz-2.6.34 for it and boot with the
following command, it works well:

CFE> setenv bootargs root=/dev/nfs rw
nfsroot=$nfs_server_ip:/path/to/nfs_root_fs ip=dhcp
CFE> ifconfig -auto eth0
CFE> boot -elf $tftp_server_ip:/path/to/vmlinuz

With -elf, the boot command of CFE can parse the vmlinuz and boot it
normally. I think you have used the wrong options of the boot command.


Studying engineer. Wu Zhangjin
Lanzhou University
Distributed & Embedded System Lab
School of Information Science and Engeneering
Address:Tianshui South Road 222,Lanzhou,P.R.China    Zip Code:730000

<Prev in Thread] Current Thread [Next in Thread>