Hi, Yajin
Arnaud Patard have sent the gpio related patch out before:
"MIPS: Loongson 2F: Add gpio/gpioilb support"
It has been applied into the
git://www.linux-mips.org/pub/scm/linux-queue.git by Ralf and can be
browsed here:
http://www.linux-mips.org/git?p=linux-queue.git;a=commit;h=625c483738cc4609eaff7b2f69b51fb1ebff636c
So this patch is not needed and seems you are using the wrong git repo,
you need to use the linux-queue.git not the linux.git.
Regards,
Wu Zhangjin
On Tue, 2010-05-04 at 17:55 +0800, yajin wrote:
> Add loongson2f GPIO interfact support. GPIOLIB needs these functions.
>
> Signed-off-by: yajin <yajin@vm-kernel.org>
> ---
> arch/mips/include/asm/mach-loongson/gpio.h | 34 +++++++
> arch/mips/loongson/common/Makefile | 5 +
> arch/mips/loongson/common/gpio.c | 145
> ++++++++++++++++++++++++++++
> 3 files changed, 184 insertions(+), 0 deletions(-)
> create mode 100644 arch/mips/include/asm/mach-loongson/gpio.h
> create mode 100644 arch/mips/loongson/common/gpio.c
>
> diff --git a/arch/mips/include/asm/mach-loongson/gpio.h
> b/arch/mips/include/asm/mach-loongson/gpio.h
> new file mode 100644
> index 0000000..00a7fae
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson/gpio.h
> @@ -0,0 +1,34 @@
> +/*
> + * STLS2F GPIO Support
> + *
> + * Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __STLS2F_GPIO_H
> +#define __STLS2F_GPIO_H
> +
> +#include <asm-generic/gpio.h>
> +
> +extern void gpio_set_value(unsigned gpio, int value);
> +extern int gpio_get_value(unsigned gpio);
> +extern int gpio_cansleep(unsigned gpio);
> +
> +/* The chip can do interrupt
> + * but it has not been tested and doc not clear
> + */
> +static inline int gpio_to_irq(int gpio)
> +{
> + return -EINVAL;
> +}
> +
> +static inline int irq_to_gpio(int gpio)
> +{
> + return -EINVAL;
> +}
> +
> +#endif /* __STLS2F_GPIO_H */
> diff --git a/arch/mips/loongson/common/Makefile
> b/arch/mips/loongson/common/Makefile
> index 7668c4d..404dbb5 100644
> --- a/arch/mips/loongson/common/Makefile
> +++ b/arch/mips/loongson/common/Makefile
> @@ -23,3 +23,8 @@ obj-$(CONFIG_CS5536) += cs5536/
> #
>
> obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
> +
> +#
> +# Loongson 2f gpio
> +#
> +obj-$(CONFIG_GENERIC_GPIO) += gpio.o
> diff --git a/arch/mips/loongson/common/gpio.c
> b/arch/mips/loongson/common/gpio.c
> new file mode 100644
> index 0000000..346418a
> --- /dev/null
> +++ b/arch/mips/loongson/common/gpio.c
> @@ -0,0 +1,145 @@
> +/*
> + * STLS2F GPIO Support
> + *
> + * Copyright(c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/spinlock.h>
> +#include <linux/err.h>
> +#include <linux/types.h>
> +
> +#include <linux/gpio.h>
> +#include <loongson.h>
> +
> +/*
> + * North bridge of loongson 2f has 4 gpio pins.
> + * GPIO_Data: reg offset 0X1C
> + * bit [3:0] gpio_out
> + * bit [19:16] gpio_in
> + */
> +#define LOONGSON_GPIO_PINS 4
> +#define LOONGSON_GPIO_IN_SHIFT 16
> +
> +static DEFINE_SPINLOCK(gpio_lock);
> +
> +int gpio_get_value(unsigned gpio)
> +{
> + u32 val;
> + u32 mask;
> +
> + if (gpio >= LOONGSON_GPIO_PINS)
> + return __gpio_get_value(gpio);
> +
> + mask = 1 << (gpio + LOONGSON_GPIO_IN_SHIFT);
> + spin_lock(&gpio_lock);
> + val = LOONGSON_GPIODATA;
> + spin_unlock(&gpio_lock);
> +
> + return ((val & mask) != 0);
> +}
> +EXPORT_SYMBOL(gpio_get_value);
> +
> +void gpio_set_value(unsigned gpio, int state)
> +{
> + u32 val;
> + u32 mask;
> +
> + if (gpio >= LOONGSON_GPIO_PINS) {
> + __gpio_set_value(gpio, state);
> + return ;
> + }
> +
> + mask = 1 << gpio;
> +
> + spin_lock(&gpio_lock);
> + val = LOONGSON_GPIODATA;
> + if (state)
> + val |= mask;
> + else
> + val &= (~mask);
> + LOONGSON_GPIODATA = val;
> + spin_unlock(&gpio_lock);
> +}
> +EXPORT_SYMBOL(gpio_set_value);
> +
> +int gpio_cansleep(unsigned gpio)
> +{
> + if (gpio < LOONGSON_GPIO_PINS)
> + return 0;
> + else
> + return __gpio_cansleep(gpio);
> +}
> +EXPORT_SYMBOL(gpio_cansleep);
> +
> +static int loongson_gpio_direction_input(struct gpio_chip *chip, unsigned
> gpio)
> +{
> + u32 temp;
> + u32 mask;
> +
> + if (gpio >= LOONGSON_GPIO_PINS)
> + return -EINVAL;
> +
> + spin_lock(&gpio_lock);
> + mask = 1 << gpio;
> + temp = LOONGSON_GPIOIE;
> + temp |= mask;
> + LOONGSON_GPIOIE = temp;
> + spin_unlock(&gpio_lock);
> +
> + return 0;
> +}
> +
> +static int loongson_gpio_direction_output(struct gpio_chip *chip,
> + unsigned gpio, int level)
> +{
> + u32 temp;
> + u32 mask;
> +
> + if (gpio >= LOONGSON_GPIO_PINS)
> + return -EINVAL;
> +
> + gpio_set_value(gpio, level);
> + spin_lock(&gpio_lock);
> + mask = 1 << gpio;
> + temp = LOONGSON_GPIOIE;
> + temp &= (~mask);
> + LOONGSON_GPIOIE = temp;
> + spin_unlock(&gpio_lock);
> +
> + return 0;
> +}
> +
> +static int loongson_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
> +{
> + return gpio_get_value(gpio);
> +}
> +
> +static void loongson_gpio_set_value(struct gpio_chip *chip,
> + unsigned gpio, int value)
> +{
> + gpio_set_value(gpio, value);
> +}
> +
> +static struct gpio_chip loongson_gpio_chip = {
> + .label = "loongson-gpio",
> + .direction_input = loongson_gpio_direction_input,
> + .get = loongson_gpio_get_value,
> + .direction_output = loongson_gpio_direction_output,
> + .set = loongson_gpio_set_value,
> + .base = 0,
> + .ngpio = LOONGSON_GPIO_PINS,
> +};
> +
> +static int __init loongson_gpio_setup(void)
> +{
> + return gpiochip_add(&loongson_gpio_chip);
> +}
> +arch_initcall(loongson_gpio_setup);
|