Re: [RFC PATCH 2/2] Alchemy: UART PM through serial framework.

[Manuel Lauss <manuel.lauss@googlemail.com>]

On Wed, Mar 24, 2010 at 6:40 PM, Sergei Shtylyov <sshtylyov@mvista.com> wrote:
> Hello.
>
> Manuel Lauss wrote:
>
>> Hook up the Alchemy on-chip uarts with the platform 8250 PM callback
>> and enable/disable the uart blocks as needed.
>>
>> Tested on Au1200.
>>
>> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
>> ---
>>  arch/mips/alchemy/common/platform.c |   17 +++++++++++++++++
>>  arch/mips/alchemy/common/power.c    |   32
>> --------------------------------
>>  2 files changed, 17 insertions(+), 32 deletions(-)
>>
>> diff --git a/arch/mips/alchemy/common/platform.c
>> b/arch/mips/alchemy/common/platform.c
>> index 2580e77..70f4abd 100644
>> --- a/arch/mips/alchemy/common/platform.c
>> +++ b/arch/mips/alchemy/common/platform.c
>> @@ -21,6 +21,22 @@
>>  #include <asm/mach-au1x00/au1100_mmc.h>
>>  #include <asm/mach-au1x00/au1xxx_eth.h>
>>  +static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
>> +                           unsigned int old_state)
>> +{
>> +       if (state == 0) {               /* power on */
>> +               __raw_writel(0, port->membase + UART_MOD_CNTRL);
>> +               wmb();
>> +               __raw_writel(1, port->membase + UART_MOD_CNTRL);
>> +               wmb();
>> +               __raw_writel(3, port->membase + UART_MOD_CNTRL);
>> +               wmb();
>> +       } else if (state == 3) {        /* power off */
>> +               __raw_writel(0, port->membase + UART_MOD_CNTRL);
>> +               wmb();
>> +       }
>> +}
>
>  A *switch* statement seems more fitting here...

Well, those are the only 2 values defined anyway, but I'll change it.

Thanks!
       Manuel Lauss