linux-mips
[Top] [All Lists]

Re: TI AR7 7200 - no boot

To: linux-mips@linux-mips.org
Subject: Re: TI AR7 7200 - no boot
From: Dea_RU <dryukovz@mail.ru>
Date: Wed, 3 Mar 2010 11:20:22 -0800 (PST)
In-reply-to: <27768844.post@talk.nabble.com>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <27766331.post@talk.nabble.com> <201003031124.46336.florian@openwrt.org> <27766728.post@talk.nabble.com> <27767861.post@talk.nabble.com> <201003031404.53039.florian@openwrt.org> <27768844.post@talk.nabble.com>
Sender: linux-mips-bounce@linux-mips.org
I show this rtunk left 10 day....

and patch src 2.6.33 from dir root/trunk/target/linux/ar7/patches-2.6.32

to day i see :

florian: [ar7] add missing patch to arch/mips/kernel/traps.c to allow ar7 to
setup … :confused:
 
------------------
for 2.6.33 need this modify ?? or not ?

arch/mips/include/asm/page.h
---------
#define UNCAC_ADDR(addr)        ((addr) - PAGE_OFFSET + UNCAC_BASE +
PHYS_OFFSET) 
#define CAC_ADDR(addr)          ((addr) - UNCAC_BASE + PAGE_OFFSET -
PHYS_OFFSET) 
---------


----------------
my console not work correctly - baudrate no standart ?!  :( i change port
type 

---- i change port type in ar7platform.c to:

uart_port[0].type = PORT_16550A
to 
uart_port[0].type = PORT_AR7

boot process ttyS0 detected as AR7.

Console baudrate not work correct again ....&-(

======= log ================
............
alg: No test for stdrng (krng)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a AR7
IdÁIdÁIdÁIdÁIdÁIdÁYdÁYdÁYdÁYdÁYdÁYdÁYdÁYdÁYdÁYdÁYdÁYd
......

==========================

if remart set_termios() in serial_core.c i see all messages ... 
-- 
View this message in context: 
http://old.nabble.com/TI-AR7-7200---no-boot-tp27766331p27772495.html
Sent from the linux-mips main mailing list archive at Nabble.com.


<Prev in Thread] Current Thread [Next in Thread>