Re: [PATCH 3/4] bcm63xx: add DWVS0 board

[Sergei Shtylyov <sshtylyov@mvista.com>]

Hello.

Florian Fainelli wrote:

> The DWVS0 board is a BCM6358-based board with an on-board OHCI controler.
>
> Signed-off-by: Florian Fainelli <florian@openwrt.org>
> ---
> diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c 
> b/arch/mips/bcm63xx/boards/board_bcm963xx.c
> index 0b1d60f..8bf2c01 100644
> --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
> +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
> @@ -567,6 +567,27 @@ static struct board_info __initdata board_AGPFS0 = {
>         .has_ohci0 = 1,
>         .has_ehci0 = 1,
>  };
> +
> +static struct board_info __initdata board_DWVS0 = {
> +       .name                           = "DWV-S0",
> +       .expected_cpu_id                = 0x6358,
> +
> +       .has_enet0                      = 1,
> +       .has_enet1                      = 1,
> +       .has_pci                        = 1,
> +
> +       .enet0 = {
> +               .has_phy                = 1,
> +               .use_internal_phy       = 1,
> +       },
> +
> +       .enet1 = {
> +               .force_speed_100        = 1,
> +               .force_duplex_full      = 1,
> +       },
> +
> +       .has_ohci0 = 1,
>   
  Why it's not aligned with the rest of initializers?

WBR, Sergei