linux-mips
[Top] [All Lists]

[PATCH v11 5/9] Loongson: YeeLoong: add video output driver

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH v11 5/9] Loongson: YeeLoong: add video output driver
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Sun, 31 Jan 2010 20:15:51 +0800
Cc: Wu Zhangjin <wuzhangjin@gmail.com>, Dmitry Torokhov <dmitry.torokhov@gmail.com>, Pavel Machek <pavel@ucw.cz>, "Rafael J. Wysocki" <rjw@sisk.pl>, linux-mips@linux-mips.org, zhangfx@lemote.com
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:cc:subject:date :message-id:x-mailer:in-reply-to:references:in-reply-to:references; bh=5IYaM9yIhqpo2bD2qBgbpKuWO6jGq1a2Pb9fo3X9iNk=; b=cDdQXYXGSt51P8aLaPioM6UbhahqzvhxA1SlzrIkJAOJfPxOY5wf1DtlX1I+z6FNWm L2FhKEETFFzvOV7vhzFcsLNmTpojUFBaZUHomimJrbNOvx1SZtCb+yYV1hf0ffRoaAEL cNrC0WjVPce06dfR8KFxbROhOnse/4fqXHnJI=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:subject:date:message-id:x-mailer:in-reply-to:references; b=bR5HwOugWuos5hWjT6R5JIVcXdDRBC37jenK+TmNCh2BWV5KKWVkvxnCP3A9G7s0AJ 4MhraiCxn2/9bDjjZKuCuGLLQJzD8NDA+4MKyfZolemV5xB+l+KH5VpXQg5W1NEde2GV dxsPBN4eXl3U/ncyOYw7qayexPrbxhamKagJU=
In-reply-to: <d83f0e8948c0552fe26998537d984bf47ef691ae.1264940063.git.wuzhangjin@gmail.com>
In-reply-to: <cover.1264940063.git.wuzhangjin@gmail.com>
References: <cover.1264940063.git.wuzhangjin@gmail.com> <b25d80b0d15f92b93fa3cb70c97c39cfb0d79c16.1264940063.git.wuzhangjin@gmail.com> <b1305e7c601d017d8c612c985cc20bb1003620f4.1264940063.git.wuzhangjin@gmail.com> <edfa13e4c6c10f97ba984f0fa5b65404a9468cec.1264940063.git.wuzhangjin@gmail.com> <d83f0e8948c0552fe26998537d984bf47ef691ae.1264940063.git.wuzhangjin@gmail.com>
References: <cover.1264940063.git.wuzhangjin@gmail.com>
Sender: linux-mips-bounce@linux-mips.org
From: Wu Zhangjin <wuzhangjin@gmail.com>

This patch adds Video Output Driver, it provides standard
interface(/sys/class/video_output) to turn on/off the video output of
LCD, CRT.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
---
 drivers/platform/mips/Kconfig           |    1 +
 drivers/platform/mips/yeeloong_laptop.c |  139 +++++++++++++++++++++++++++++++
 2 files changed, 140 insertions(+), 0 deletions(-)

diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig
index d4ce744..e1285f7 100644
--- a/drivers/platform/mips/Kconfig
+++ b/drivers/platform/mips/Kconfig
@@ -19,6 +19,7 @@ config LEMOTE_YEELOONG2F
        depends on LEMOTE_MACH2F
        select BACKLIGHT_CLASS_DEVICE
        select HWMON
+       select VIDEO_OUTPUT_CONTROL
        help
          YeeLoong netbook is a mini laptop made by Lemote, which is basically
          compatible to FuLoong2F mini PC, but it has an extra Embedded
diff --git a/drivers/platform/mips/yeeloong_laptop.c 
b/drivers/platform/mips/yeeloong_laptop.c
index 7182580..4f11bc1 100644
--- a/drivers/platform/mips/yeeloong_laptop.c
+++ b/drivers/platform/mips/yeeloong_laptop.c
@@ -14,6 +14,7 @@
 #include <linux/fb.h>
 #include <linux/hwmon.h>       /* for hwmon subdriver */
 #include <linux/hwmon-sysfs.h>
+#include <linux/video_output.h>        /* for video output subdriver */
 
 #include <ec_kb3310b.h>
 
@@ -321,6 +322,136 @@ static void yeeloong_hwmon_exit(void)
        }
 }
 
+/* video output subdriver */
+
+static int lcd_video_output_get(struct output_device *od)
+{
+       return ec_read(REG_DISPLAY_LCD);
+}
+
+#define LCD    0
+#define CRT    1
+
+static void display_vo_set(int display, int on)
+{
+       int addr;
+       unsigned long value;
+
+       addr = (display == LCD) ? 0x31 : 0x21;
+
+       outb(addr, 0x3c4);
+       value = inb(0x3c5);
+
+       if (display == LCD)
+               value |= (on ? 0x03 : 0x02);
+       else {
+               if (on)
+                       clear_bit(7, &value);
+               else
+                       set_bit(7, &value);
+       }
+
+       outb(addr, 0x3c4);
+       outb(value, 0x3c5);
+}
+
+static int lcd_video_output_set(struct output_device *od)
+{
+       unsigned long status;
+
+       status = !!od->request_state;
+
+       display_vo_set(LCD, status);
+       ec_write(REG_BACKLIGHT_CTRL, status);
+
+       return 0;
+}
+
+static struct output_properties lcd_output_properties = {
+       .set_state = lcd_video_output_set,
+       .get_status = lcd_video_output_get,
+};
+
+static int crt_video_output_get(struct output_device *od)
+{
+       return ec_read(REG_CRT_DETECT);
+}
+
+static int crt_video_output_set(struct output_device *od)
+{
+       unsigned long status;
+
+       status = !!od->request_state;
+
+       if (ec_read(REG_CRT_DETECT) == BIT_CRT_DETECT_PLUG)
+               display_vo_set(CRT, status);
+
+       return 0;
+}
+
+static struct output_properties crt_output_properties = {
+       .set_state = crt_video_output_set,
+       .get_status = crt_video_output_get,
+};
+
+static struct output_device *lcd_output_dev, *crt_output_dev;
+
+static void yeeloong_lcd_vo_set(int status)
+{
+       lcd_output_dev->request_state = status;
+       lcd_video_output_set(lcd_output_dev);
+}
+
+static void yeeloong_crt_vo_set(int status)
+{
+       crt_output_dev->request_state = status;
+       crt_video_output_set(crt_output_dev);
+}
+
+static int yeeloong_vo_init(void)
+{
+       int ret;
+
+       /* Register video output device: lcd, crt */
+       lcd_output_dev = video_output_register("LCD", NULL, NULL,
+                       &lcd_output_properties);
+
+       if (IS_ERR(lcd_output_dev)) {
+               ret = PTR_ERR(lcd_output_dev);
+               lcd_output_dev = NULL;
+               return ret;
+       }
+       /* Ensure LCD is on by default */
+       yeeloong_lcd_vo_set(BIT_DISPLAY_LCD_ON);
+
+       crt_output_dev = video_output_register("CRT", NULL, NULL,
+                       &crt_output_properties);
+
+       if (IS_ERR(crt_output_dev)) {
+               ret = PTR_ERR(crt_output_dev);
+               crt_output_dev = NULL;
+               return ret;
+       }
+
+       /* Turn off CRT by default, and will be enabled when the CRT
+        * connectting event reported by SCI */
+       yeeloong_crt_vo_set(BIT_CRT_DETECT_UNPLUG);
+
+       return 0;
+}
+
+static void yeeloong_vo_exit(void)
+{
+       if (lcd_output_dev) {
+               video_output_unregister(lcd_output_dev);
+               lcd_output_dev = NULL;
+       }
+       if (crt_output_dev) {
+               video_output_unregister(crt_output_dev);
+               crt_output_dev = NULL;
+       }
+}
+
 static struct platform_device_id platform_device_ids[] = {
        {
                .name = "yeeloong_laptop",
@@ -365,11 +496,19 @@ static int __init yeeloong_init(void)
                return ret;
        }
 
+       ret = yeeloong_vo_init();
+       if (ret) {
+               pr_err("Fail to register yeeloong video output driver.\n");
+               yeeloong_vo_exit();
+               return ret;
+       }
+
        return 0;
 }
 
 static void __exit yeeloong_exit(void)
 {
+       yeeloong_vo_exit();
        yeeloong_hwmon_exit();
        yeeloong_backlight_exit();
        platform_driver_unregister(&platform_driver);
-- 
1.6.6


<Prev in Thread] Current Thread [Next in Thread>