linux-mips
[Top] [All Lists]

[RFC PATCH] MIPS: Alchemy: debug output for compressed kernels

To: Linux-MIPS <linux-mips@linux-mips.org>
Subject: [RFC PATCH] MIPS: Alchemy: debug output for compressed kernels
From: Manuel Lauss <manuel.lauss@googlemail.com>
Date: Wed, 13 Jan 2010 18:46:58 +0100
Cc: Manuel Lauss <manuel.lauss@gmail.com>, Wu Zhangjin <wuzhangjin@gmail.com>
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=gamma; h=domainkey-signature:received:received:from:to:cc:subject:date :message-id:x-mailer; bh=hcYUKKmEKOOMXkn9/a0sNk/1UcyVKjLiidR6Ie9gF/M=; b=QAvLEUF3Fof/GyW06EuaxSiZkdpBDJzpM7X3cjPMMSLRszfBBP99iSsqSOt7bbYDs+ In44y7/TtUM7/2LR0qBSYrH5S0qo/1JdKG91aMEWaPlSp+5WnbrABM+lmKgl4KUtrWgZ ICCmstuEFSKy3OmWbY3Fkh4GNGz7IUkXD4Zqk=
Domainkey-signature: a=rsa-sha1; c=nofws; d=googlemail.com; s=gamma; h=from:to:cc:subject:date:message-id:x-mailer; b=tNH6jIbQlPzMLk33gfIAHTMOoIG3bC+ufG2oVldroms0i8CLTn1Gs47izfx9caXLoh prJ6c+9ybaBzKj/F3hdodXJ200K5hD7S1IKh23bcY3ZilpHcGLKXbDlM/BeAMN1u4Q/E K4/TrQODC+K4zTCMV/bvcJl031WmjnPQkqssI=
Sender: linux-mips-bounce@linux-mips.org
Hook up the compressed debug output for all Alchemy systems supported
by current kernel codebase.

Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
---
The code is built for all alchemy systems since I doubt anyone would
solder on an extra UART chip instead of using the built-in ones.

Should work on all in-kernel boards; my db1200 likes it:
 zimage at:     82E21350 82FA149D
 Uncompressing Linux at load address 80100000
 Now, booting the kernel...


 arch/mips/boot/compressed/Makefile       |    1 +
 arch/mips/boot/compressed/uart-alchemy.c |    7 +++++++
 2 files changed, 8 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/boot/compressed/uart-alchemy.c

diff --git a/arch/mips/boot/compressed/Makefile 
b/arch/mips/boot/compressed/Makefile
index 671d344..5f09c18 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -33,6 +33,7 @@ KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) 
-D__ASSEMBLY__ \
 obj-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o
 
 obj-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
+obj-$(CONFIG_MACH_ALCHEMY)                += $(obj)/uart-alchemy.o
 
 OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
 $(obj)/vmlinux.bin: $(KBUILD_IMAGE)
diff --git a/arch/mips/boot/compressed/uart-alchemy.c 
b/arch/mips/boot/compressed/uart-alchemy.c
new file mode 100644
index 0000000..1bff22f
--- /dev/null
+++ b/arch/mips/boot/compressed/uart-alchemy.c
@@ -0,0 +1,7 @@
+#include <asm/mach-au1x00/au1000.h>
+
+void putc(char c)
+{
+       /* all current (Jan. 2010) in-kernel boards */
+       alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}
-- 
1.6.5.6


<Prev in Thread] Current Thread [Next in Thread>