linux-mips
[Top] [All Lists]

[PATCH v7 5/8] Loongson: YeeLoong: add hardware monitoring driver

To: Ralf Baechle <ralf@linux-mips.org>, akpm@linux-foundation.org, linux-mips@linux-mips.org, linux-kernel@vger.kernel.org
Subject: [PATCH v7 5/8] Loongson: YeeLoong: add hardware monitoring driver
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Fri, 4 Dec 2009 21:35:28 +0800
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>, Pavel Machek <pavel@ucw.cz>, "Rafael J. Wysocki" <rjw@sisk.pl>, zhangfx@lemote.com, linux-laptop@vger.kernel.org, Wu Zhangjin <wuzhangjin@gmail.com>
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:cc:subject:date :message-id:x-mailer:in-reply-to:references; bh=vTTWvflNT3LN5bbI+XkzpkjScQ+RZ44stQaRS0dV5j4=; b=DpAlSrKDPDTcYsUCMCa0CoOTe7jToHb8PlfozOp1B2yEDeuCneiVS6tM458eXwZjLY 91HHMl2i046sl9EqSOW/5iqSRBWQBycQKicScobil2qiFVqkwlMQcdhChekmJawu4MAU sRif1+Uf0yF4VE5E9Hiw08Iil5Q3SNwvFH+FQ=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:subject:date:message-id:x-mailer:in-reply-to:references; b=nQm7m421u5KPn9BM5kuEdod1lehTrKm2xp7pzaQt503ZNDNZsRogx2E3nBpGRnGiKO z1s3mDKOqQx61YD/OLWcH5aCq1BGHiMoyTHtGOLKfy8WjZHMBloJr0jKfatMZOV4c1fS Sn65IU7xSFs42HQqeujywmQz2tPTB/Hc/V0ck=
In-reply-to: <cover.1259932036.git.wuzhangjin@gmail.com>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <cover.1259932036.git.wuzhangjin@gmail.com>
Sender: linux-mips-bounce@linux-mips.org
From: Wu Zhangjin <wuzhangjin@gmail.com>

This patch adds hardware monitoring driver, it provides standard
interface(/sys/class/hwmon/) for lm-sensors/sensors-applet to monitor
the temperatures of CPU and battery, the PWM of fan, the current,
voltage of battery.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
---
 drivers/platform/mips/Kconfig           |    1 +
 drivers/platform/mips/yeeloong_laptop.c |  221 +++++++++++++++++++++++++++++++
 2 files changed, 222 insertions(+), 0 deletions(-)

diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig
index 0c6b5ad..9c8385c 100644
--- a/drivers/platform/mips/Kconfig
+++ b/drivers/platform/mips/Kconfig
@@ -20,6 +20,7 @@ config LEMOTE_YEELOONG2F
        select BACKLIGHT_CLASS_DEVICE
        select SYS_SUPPORTS_APM_EMULATION
        select APM_EMULATION
+       select HWMON
        default m
        help
          YeeLoong netbook is a mini laptop made by Lemote, which is basically
diff --git a/drivers/platform/mips/yeeloong_laptop.c 
b/drivers/platform/mips/yeeloong_laptop.c
index 729e368..644aaa7 100644
--- a/drivers/platform/mips/yeeloong_laptop.c
+++ b/drivers/platform/mips/yeeloong_laptop.c
@@ -14,6 +14,8 @@
 #include <linux/backlight.h>   /* for backlight subdriver */
 #include <linux/fb.h>
 #include <linux/apm-emulation.h>/* for battery subdriver */
+#include <linux/hwmon.h>       /* for hwmon subdriver */
+#include <linux/hwmon-sysfs.h>
 
 #include <ec_kb3310b.h>
 
@@ -184,6 +186,217 @@ static void yeeloong_battery_exit(void)
                apm_get_power_status = NULL;
 }
 
+/* hwmon subdriver */
+
+/* pwm(auto/manual) enable or not */
+static int get_fan_pwm_enable(void)
+{
+       return ec_read(REG_FAN_AUTO_MAN_SWITCH);
+}
+
+static void set_fan_pwm_enable(int manual)
+{
+       ec_write(REG_FAN_AUTO_MAN_SWITCH, !!manual);
+}
+
+static int get_fan_pwm(void)
+{
+       return ec_read(REG_FAN_SPEED_LEVEL);
+}
+
+static void set_fan_pwm(int value)
+{
+       int status;
+
+       value = SENSORS_LIMIT(value, 0, 3);
+
+       /* If value is not ZERO, We should ensure it is on */
+       if (value != 0) {
+               status = ec_read(REG_FAN_STATUS);
+               if (status == 0)
+                       ec_write(REG_FAN_CONTROL, BIT_FAN_CONTROL_ON);
+       }
+       ec_write(REG_FAN_SPEED_LEVEL, value);
+}
+
+static int get_fan_rpm(void)
+{
+       int value;
+
+       value = FAN_SPEED_DIVIDER /
+           (((ec_read(REG_FAN_SPEED_HIGH) & 0x0f) << 8) |
+            ec_read(REG_FAN_SPEED_LOW));
+
+       return value;
+}
+
+static int get_cpu_temp(void)
+{
+       int value;
+
+       value = ec_read(REG_TEMPERATURE_VALUE);
+
+       if (value & (1 << 7))
+               value = (value & 0x7f) - 128;
+       else
+               value = value & 0xff;
+
+       return value * 1000;
+}
+
+static int get_battery_temp(void)
+{
+       int value;
+
+       value = (ec_read(REG_BAT_TEMPERATURE_HIGH) << 8) |
+               (ec_read(REG_BAT_TEMPERATURE_LOW));
+
+       return value * 1000;
+}
+
+static int get_battery_temp_alarm(void)
+{
+       int status;
+
+       status = (ec_read(REG_BAT_CHARGE_STATUS) &
+                       BIT_BAT_CHARGE_STATUS_OVERTEMP);
+
+       return !!status;
+}
+
+static int get_battery_current(void)
+{
+       int value;
+
+       value = (ec_read(REG_BAT_CURRENT_HIGH) << 8) |
+               (ec_read(REG_BAT_CURRENT_LOW));
+
+       if (value & 0x8000)
+               value = 0xffff - value;
+
+       return value;
+}
+
+static int get_battery_voltage(void)
+{
+       int value;
+
+       value = (ec_read(REG_BAT_VOLTAGE_HIGH) << 8) |
+               (ec_read(REG_BAT_VOLTAGE_LOW));
+
+       return value;
+}
+
+
+static int parse_arg(const char *buf, unsigned long count, int *val)
+{
+       if (!count)
+               return 0;
+       if (sscanf(buf, "%i", val) != 1)
+               return -EINVAL;
+       return count;
+}
+
+static ssize_t store_sys_hwmon(void (*set) (int), const char *buf, size_t 
count)
+{
+       int rv, value;
+
+       rv = parse_arg(buf, count, &value);
+       if (rv > 0)
+               set(value);
+       return rv;
+}
+
+static ssize_t show_sys_hwmon(int (*get) (void), char *buf)
+{
+       return sprintf(buf, "%d\n", get());
+}
+
+#define CREATE_SENSOR_ATTR(_name, _mode, _set, _get)           \
+       static ssize_t show_##_name(struct device *dev,                 \
+                                   struct device_attribute *attr,      \
+                                   char *buf)                          \
+       {                                                               \
+               return show_sys_hwmon(_set, buf);                       \
+       }                                                               \
+       static ssize_t store_##_name(struct device *dev,                \
+                                    struct device_attribute *attr,     \
+                                    const char *buf, size_t count)     \
+       {                                                               \
+               return store_sys_hwmon(_get, buf, count);               \
+       }                                                               \
+       static SENSOR_DEVICE_ATTR(_name, _mode, show_##_name, store_##_name, 0);
+
+CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, get_fan_rpm, NULL);
+CREATE_SENSOR_ATTR(pwm1, S_IRUGO | S_IWUSR, get_fan_pwm, set_fan_pwm);
+CREATE_SENSOR_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, get_fan_pwm_enable,
+               set_fan_pwm_enable);
+CREATE_SENSOR_ATTR(temp1_input, S_IRUGO, get_cpu_temp, NULL);
+CREATE_SENSOR_ATTR(temp2_input, S_IRUGO, get_battery_temp, NULL);
+CREATE_SENSOR_ATTR(temp2_max_alarm, S_IRUGO, get_battery_temp_alarm, NULL);
+CREATE_SENSOR_ATTR(curr1_input, S_IRUGO, get_battery_current, NULL);
+CREATE_SENSOR_ATTR(in1_input, S_IRUGO, get_battery_voltage, NULL);
+
+static ssize_t
+show_name(struct device *dev, struct device_attribute *attr, char *buf)
+{
+       return sprintf(buf, "yeeloong\n");
+}
+
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
+
+static struct attribute *hwmon_attributes[] = {
+       &sensor_dev_attr_pwm1.dev_attr.attr,
+       &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+       &sensor_dev_attr_fan1_input.dev_attr.attr,
+       &sensor_dev_attr_temp1_input.dev_attr.attr,
+       &sensor_dev_attr_temp2_input.dev_attr.attr,
+       &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+       &sensor_dev_attr_curr1_input.dev_attr.attr,
+       &sensor_dev_attr_in1_input.dev_attr.attr,
+       &sensor_dev_attr_name.dev_attr.attr,
+       NULL
+};
+
+static struct attribute_group hwmon_attribute_group = {
+       .attrs = hwmon_attributes
+};
+
+static struct device *yeeloong_hwmon_dev;
+
+static int yeeloong_hwmon_init(void)
+{
+       int ret;
+
+       yeeloong_hwmon_dev = hwmon_device_register(NULL);
+       if (IS_ERR(yeeloong_hwmon_dev)) {
+               pr_err("Fail to register yeeloong hwmon device\n");
+               yeeloong_hwmon_dev = NULL;
+               return PTR_ERR(yeeloong_hwmon_dev);
+       }
+       ret = sysfs_create_group(&yeeloong_hwmon_dev->kobj,
+                                &hwmon_attribute_group);
+       if (ret) {
+               hwmon_device_unregister(yeeloong_hwmon_dev);
+               yeeloong_hwmon_dev = NULL;
+               return ret;
+       }
+       /* ensure fan is set to auto mode */
+       set_fan_pwm_enable(BIT_FAN_AUTO);
+
+       return 0;
+}
+
+static void yeeloong_hwmon_exit(void)
+{
+       if (yeeloong_hwmon_dev) {
+               sysfs_remove_group(&yeeloong_hwmon_dev->kobj,
+                                  &hwmon_attribute_group);
+               hwmon_device_unregister(yeeloong_hwmon_dev);
+               yeeloong_hwmon_dev = NULL;
+       }
+}
+
 static struct platform_device_id platform_device_ids[] = {
        {
                .name = "yeeloong_laptop",
@@ -223,11 +436,19 @@ static int __init yeeloong_init(void)
 
        yeeloong_battery_init();
 
+       ret = yeeloong_hwmon_init();
+       if (ret) {
+               pr_err("Fail to register yeeloong hwmon driver.\n");
+               yeeloong_hwmon_exit();
+               return ret;
+       }
+
        return 0;
 }
 
 static void __exit yeeloong_exit(void)
 {
+       yeeloong_hwmon_exit();
        yeeloong_battery_exit();
        yeeloong_backlight_exit();
        platform_driver_unregister(&platform_driver);
-- 
1.6.2.1


<Prev in Thread] Current Thread [Next in Thread>