Re: [PATCH -queue 1/2] [loongson] 2f: add suspend support framework

[Wu Zhangjin <wuzhangjin@gmail.com>]

Hi,

On Wed, 2009-11-11 at 11:33 +0100, Pavel Machek wrote:
> On Wed 2009-11-11 14:57:05, Wu Zhangjin wrote:
> > (Add CC to Rafael J. Wysocki, Len Brown and Pavel Machek)
> > 
> > This patch add basic suspend support for loongson2f family machines,
> > loongson2f have a specific feature: when we set it's frequency to ZERO,
> > it will go into a wait mode, and then can be waked up by the external
> > interrupt. so, if we setup suitable interrupts before putting it into
> > wait mode, we will be able wake it up whenever we want via sending the
> > relative interrupts to it.
> > 
> > These interrupts are board-specific, Yeeloong2F use the keyboard
> > interrupt and SCI interrupt, but LingLoong and Fuloong2F use the
> > interrupts connected to the processors directly. and BTW: some old
> > LingLoong and FuLoong2F have no such interrupts connected, so, there is
> > no way to wake them up from suspend mode. and therefore, please do not
> > enable the kernel support for them.
> > 
> > The board-specific support will be added in the coming patches.
> > 
> > Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
> 
> Comments are slighlty "interesting", but otherwise it looks ok.
> 
> > +   /* stop all perf counters */
> > +   stop_perf_counters();
> 
> This is not exactly useful comment, right?
> 
 
Will remove it later ;) the same to the following two.

> > +   /* mach specific suspend */
> > +   mach_suspend();
> ...
> > +   /* mach specific resume */
> > +   mach_resume();
> 
> 
> It is probably ok, but you may want to avoid them in future.
> 
> ACK.
>                                                                       Pavel
> 

Thanks!
        Wu Zhangjin