linux-mips
[Top] [All Lists]

[PATCH 1/2] alchemy: add au1000-eth platform device

To: Ralf Baechle <ralf@linux-mips.org>, netdev@vger.kernel.org, David Miller <davem@davemloft.net>
Subject: [PATCH 1/2] alchemy: add au1000-eth platform device
From: Florian Fainelli <florian@openwrt.org>
Date: Tue, 10 Nov 2009 01:13:30 +0100
Cc: "linux-mips" <linux-mips@linux-mips.org>
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:sender:from:date:subject :mime-version:x-uid:x-length:to:cc:reply-to:content-type :content-transfer-encoding:message-id; bh=NjEL9oDv1EYbVGRS7VF1haWTBARt8/ABu+BlWKM90c8=; b=ZstMAIZnlFXmxFlUpTRvrHCRhv5qdXjT/D5YCgtSa2NNNY8lokZw9KpABIV2gxYSbV Vclpuo24NW8PBSCRQASB+80/Loe8K0mIKLrQCo/+WjMYyuGF4kCCZQIo5dctvYbPxzaB 8+52ow28+gxvyIhRsRih3vV6WK3q1rsVwY54o=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=sender:from:date:subject:mime-version:x-uid:x-length:to:cc:reply-to :content-type:content-transfer-encoding:message-id; b=oy6yBObZ4AfKb7ThUHFVPLSeP+hYqO3cmdNHR+Nc0BnwQqsM5zbn4Sll7reio8VI2x 1YAyR4QaejR1QMTQm9yO7Sp+CNL98Srs7uklngPAuaVCNOecqb+ZvyDA1ck/jt3/9kbD 33CN9zbbdxUv8G8ooLN2qtO+RBfMl4hL6r5dk=
Original-recipient: rfc822;linux-mips@linux-mips.org
Reply-to: Florian Fainelli <florian@openwrt.org>
Sender: linux-mips-bounce@linux-mips.org
(resending per Ralf's request as the patch had some checkpatch errors)

This patch makes the board code register the au1000-eth
platform device. The au1000-eth platform data can be
overriden with the au1xxx_override_eth_cfg function
like it has to be done for the Bosporus board which uses
a different MAC/PHY setup.

Changes from v3:
- declare a static au1000_eth_platform_data structure for bosporus and
initialize it
- remove parenthis and bit shifting on SYS_PF_NI2

Changes from v2:
- declared the au1000-eth second driver instance platform_data
- made the override function generic and pass it the port number too

Changes from v1:
- remove per-board platform.c file
- add an override function to pass custom eth0 platform_data PHY settings

Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
diff --git a/arch/mips/alchemy/common/platform.c 
b/arch/mips/alchemy/common/platform.c
index 3be14b0..3fbe30c 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -19,6 +19,7 @@
 #include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
 
 #define PORT(_base, _irq)                                      \
        {                                                       \
@@ -326,6 +327,88 @@ static struct platform_device pbdb_smbus_device = {
 };
 #endif
 
+/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES(_base, _enable, _irq)                  \
+       {                                               \
+               .start  = CPHYSADDR(_base),             \
+               .end    = CPHYSADDR(_base + 0xffff),    \
+               .flags  = IORESOURCE_MEM,               \
+       },                                              \
+       {                                               \
+               .start  = CPHYSADDR(_enable),           \
+               .end    = CPHYSADDR(_enable + 0x3),     \
+               .flags  = IORESOURCE_MEM,               \
+       },                                              \
+       {                                               \
+               .start  = _irq,                         \
+               .end    = _irq,                         \
+               .flags  = IORESOURCE_IRQ                \
+       }
+
+static struct resource au1xxx_eth0_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+       MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1100)
+       MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+       MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+       MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
+#endif
+};
+
+static struct resource au1xxx_eth1_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+       MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+       MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+       MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
+#endif
+};
+
+static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
+       .phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth0_device = {
+       .name           = "au1000-eth",
+       .id             = 0,
+       .num_resources  = ARRAY_SIZE(au1xxx_eth0_resources),
+       .resource       = au1xxx_eth0_resources,
+       .dev.platform_data = &au1xxx_eth0_platform_data,
+};
+
+#ifndef CONFIG_SOC_AU1100
+static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
+       .phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth1_device = {
+       .name           = "au1000-eth",
+       .id             = 1,
+       .num_resources  = ARRAY_SIZE(au1xxx_eth1_resources),
+       .resource       = au1xxx_eth1_resources,
+       .dev.platform_data = &au1xxx_eth1_platform_data,
+};
+#endif
+
+void __init au1xxx_override_eth_cfg(unsigned int port,
+                       struct au1000_eth_platform_data *eth_data)
+{
+       if (!eth_data || port > 1)
+               return;
+
+       if (port == 0)
+               memcpy(&au1xxx_eth0_platform_data, eth_data,
+                       sizeof(struct au1000_eth_platform_data));
+#ifndef CONFIG_SOC_AU1100
+       else
+               memcpy(&au1xxx_eth1_platform_data, eth_data,
+                       sizeof(struct au1000_eth_platform_data));
+#endif
+}
+
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
        &au1xx0_uart_device,
        &au1xxx_usb_ohci_device,
@@ -345,6 +428,7 @@ static struct platform_device *au1xxx_platform_devices[] 
__initdata = {
 #ifdef SMBUS_PSC_BASE
        &pbdb_smbus_device,
 #endif
+       &au1xxx_eth0_device,
 };
 
 static int __init au1xxx_platform_init(void)
@@ -356,6 +440,12 @@ static int __init au1xxx_platform_init(void)
        for (i = 0; au1x00_uart_data[i].flags; i++)
                au1x00_uart_data[i].uartclk = uartclk;
 
+#ifndef CONFIG_SOC_AU1100
+       /* Register second MAC if enabled in pinfunc */
+       if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+               platform_device_register(&au1xxx_eth1_device);
+#endif
+
        return platform_add_devices(au1xxx_platform_devices,
                                    ARRAY_SIZE(au1xxx_platform_devices));
 }
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c 
b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 7aee14d..ad26db2 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
 #include <asm/mach-db1x00/db1x00.h>
 #include <asm/mach-db1x00/bcsr.h>
 
@@ -43,6 +44,18 @@ char irq_tab_alchemy[][5] __initdata = {
        [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, 
AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
 };
 #endif
+       
+/*
+ * Micrel/Kendin 5 port switch attached to MAC0,
+ * MAC0 is associated with PHY address 5 (== WAN port)
+ * MAC1 is not associated with any PHY, since it's connected directly
+ * to the switch.
+ * no interrupts are used
+ */
+static struct au1000_eth_platform_data eth0_pdata = {
+       .phy_static_config      = 1,
+       .phy_addr               = 5,
+};
 
 #ifdef CONFIG_MIPS_BOSPORUS
 char irq_tab_alchemy[][5] __initdata = {
@@ -50,6 +63,8 @@ char irq_tab_alchemy[][5] __initdata = {
        [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741  
 */
        [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, 
AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
 };
+
+
 #endif
 
 #ifdef CONFIG_MIPS_MIRAGE
@@ -103,6 +118,8 @@ void __init board_setup(void)
        printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
 #endif
 #ifdef CONFIG_MIPS_BOSPORUS
+       au1xxx_override_eth_cfg(0, &eth0_pdata);
+
        printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
 #endif
 #ifdef CONFIG_MIPS_MIRAGE
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h 
b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
new file mode 100644
index 0000000..f30529e
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
@@ -0,0 +1,18 @@
+#ifndef __AU1X00_ETH_DATA_H
+#define __AU1X00_ETH_DATA_H
+
+/* Platform specific PHY configuration passed to the MAC driver */
+struct au1000_eth_platform_data {
+       int phy_static_config;
+       int phy_search_highest_addr;
+       int phy1_search_mac0;
+       int phy_addr;
+       int phy_busid;
+       int phy_irq;
+};
+
+void __init au1xxx_override_eth_cfg(unsigned port,
+                       struct au1000_eth_platform_data *eth_data);
+
+#endif /* __AU1X00_ETH_DATA_H */
+

<Prev in Thread] Current Thread [Next in Thread>