linux-mips
[Top] [All Lists]

Re: [PATCH -queue v0 1/6] [loongson] add basic loongson-2f support

To: Wu Zhangjin <wuzhangjin@gmail.com>
Subject: Re: [PATCH -queue v0 1/6] [loongson] add basic loongson-2f support
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 5 Nov 2009 10:18:41 +0100
Cc: linux-mips@linux-mips.org, LKML <linux-kernel@vger.kernel.org>, huhb@lemote.com, yanh@lemote.com, Zhang Le <r0bertz@gentoo.org>, Thomas Gleixner <tglx@linutronix.de>, Nicholas Mc Guire <der.herr@hofr.at>, zhangfx@lemote.com, liujl@lemote.com
In-reply-to: <a1bd2470bc465e505281c761adca8c2287d102b3.1257325319.git.wuzhangjin@gmail.com>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <cover.1257325319.git.wuzhangjin@gmail.com> <a1bd2470bc465e505281c761adca8c2287d102b3.1257325319.git.wuzhangjin@gmail.com>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.5.19 (2009-01-05)
On Wed, Nov 04, 2009 at 05:04:47PM +0800, Wu Zhangjin wrote:

> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index ae9fa98..8417357 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -1059,6 +1059,21 @@ config CPU_LOONGSON2E
>         The Loongson 2E processor implements the MIPS III instruction set
>         with many extensions.
>  
> +       It has an internal FPGA northbridge, which is compatiable to
> +       bonito64.
> +
> +config CPU_LOONGSON2F
> +     bool "Loongson 2F"
> +     depends on SYS_HAS_CPU_LOONGSON2F
> +     select CPU_LOONGSON2
> +     help
> +       The Loongson 2F processor implements the MIPS III instruction set
> +       with many extensions.

I thought the Loongson 2E/2F were MIPS64 Release 1 compatible?

> +       Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller
> +       have a similar programming interface with FPGA northbridge used in
> +       Loongson2E.
> +
>  config CPU_MIPS32_R1
>       bool "MIPS32 Release 1"
>       depends on SYS_HAS_CPU_MIPS32_R1
> @@ -1303,6 +1318,9 @@ config CPU_LOONGSON2
>  config SYS_HAS_CPU_LOONGSON2E
>       bool
>  
> +config SYS_HAS_CPU_LOONGSON2F
> +     bool
> +
>  config SYS_HAS_CPU_MIPS32_R1
>       bool
>  
> diff --git a/arch/mips/Makefile b/arch/mips/Makefile
> index ba04782..47ecded 100644
> --- a/arch/mips/Makefile
> +++ b/arch/mips/Makefile
> @@ -125,6 +125,8 @@ cflags-$(CONFIG_CPU_TX49XX)       += -march=r4600 
> -Wa,--trap
>  cflags-$(CONFIG_CPU_LOONGSON2)       += -Wa,--trap
>  cflags-$(CONFIG_CPU_LOONGSON2E) += \
>       $(call cc-option,-march=loongson2e,-march=r4600)
> +cflags-$(CONFIG_CPU_LOONGSON2F) += \
> +     $(call cc-option,-march=loongson2f,-march=r4600)
>  
>  cflags-$(CONFIG_CPU_MIPS32_R1)       += $(call 
> cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
>                       -Wa,-mips32 -Wa,--trap
> diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h 
> b/arch/mips/include/asm/mach-loongson/dma-coherence.h
> index 71a6851..981c75f 100644
> --- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
> +++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
> @@ -28,7 +28,11 @@ static inline dma_addr_t plat_map_dma_mem_page(struct 
> device *dev,
>  static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
>       dma_addr_t dma_addr)
>  {
> +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +     return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
> +#else
>       return dma_addr & 0x7fffffff;
> +#endif

You're ifdefing on Loongson 2F - doesn't that mean that you can't have a
kernel that supports both Loongson 2E and 2F?

>  }
>  
>  static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t 
> dma_addr,
> diff --git a/arch/mips/include/asm/mach-loongson/loongson.h 
> b/arch/mips/include/asm/mach-loongson/loongson.h
> index e6869aa..9e41469 100644
> --- a/arch/mips/include/asm/mach-loongson/loongson.h
> +++ b/arch/mips/include/asm/mach-loongson/loongson.h
> @@ -1,5 +1,5 @@
>  /*
> - * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
> + * Copyright (C) 2009 Lemote, Inc.
>   * Author: Wu Zhangjin <wuzj@lemote.com>
>   *
>   * This program is free software; you can redistribute  it and/or modify it
> @@ -215,4 +215,86 @@ extern void mach_irq_dispatch(unsigned int pending);
>  #define LOONGSON_PCIMAP_WIN(WIN, ADDR)       \
>       ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
>  
> +/* Chip Config */
> +#ifdef CONFIG_CPU_LOONGSON2F
> +#define LOONGSON_CHIPCFG0            LOONGSON_REG(LOONGSON_REGBASE + 0x80)
> +#endif
> +
> +/*
> + * address windows configuration module
> + *
> + * loongson2e do not have this module
> + */
> +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +
> +/* address window config module base address */
> +#define LOONGSON_ADDRWINCFG_BASE             0x3ff00000ul
> +#define LOONGSON_ADDRWINCFG_SIZE             0x180
> +
> +extern unsigned long _loongson_addrwincfg_base;
> +#define LOONGSON_ADDRWINCFG(offset) \
> +     (*(volatile u64 *)(_loongson_addrwincfg_base + (offset)))
> +
> +#define CPU_WIN0_BASE        LOONGSON_ADDRWINCFG(0x00)
> +#define CPU_WIN1_BASE        LOONGSON_ADDRWINCFG(0x08)
> +#define CPU_WIN2_BASE        LOONGSON_ADDRWINCFG(0x10)
> +#define CPU_WIN3_BASE        LOONGSON_ADDRWINCFG(0x18)
> +
> +#define CPU_WIN0_MASK        LOONGSON_ADDRWINCFG(0x20)
> +#define CPU_WIN1_MASK        LOONGSON_ADDRWINCFG(0x28)
> +#define CPU_WIN2_MASK        LOONGSON_ADDRWINCFG(0x30)
> +#define CPU_WIN3_MASK        LOONGSON_ADDRWINCFG(0x38)
> +
> +#define CPU_WIN0_MMAP        LOONGSON_ADDRWINCFG(0x40)
> +#define CPU_WIN1_MMAP        LOONGSON_ADDRWINCFG(0x48)
> +#define CPU_WIN2_MMAP        LOONGSON_ADDRWINCFG(0x50)
> +#define CPU_WIN3_MMAP        LOONGSON_ADDRWINCFG(0x58)
> +
> +#define PCIDMA_WIN0_BASE     LOONGSON_ADDRWINCFG(0x60)
> +#define PCIDMA_WIN1_BASE     LOONGSON_ADDRWINCFG(0x68)
> +#define PCIDMA_WIN2_BASE     LOONGSON_ADDRWINCFG(0x70)
> +#define PCIDMA_WIN3_BASE     LOONGSON_ADDRWINCFG(0x78)
> +
> +#define PCIDMA_WIN0_MASK     LOONGSON_ADDRWINCFG(0x80)
> +#define PCIDMA_WIN1_MASK     LOONGSON_ADDRWINCFG(0x88)
> +#define PCIDMA_WIN2_MASK     LOONGSON_ADDRWINCFG(0x90)
> +#define PCIDMA_WIN3_MASK     LOONGSON_ADDRWINCFG(0x98)
> +
> +#define PCIDMA_WIN0_MMAP     LOONGSON_ADDRWINCFG(0xa0)
> +#define PCIDMA_WIN1_MMAP     LOONGSON_ADDRWINCFG(0xa8)
> +#define PCIDMA_WIN2_MMAP     LOONGSON_ADDRWINCFG(0xb0)
> +#define PCIDMA_WIN3_MMAP     LOONGSON_ADDRWINCFG(0xb8)
> +
> +#define ADDRWIN_WIN0 0
> +#define ADDRWIN_WIN1 1
> +#define ADDRWIN_WIN2 2
> +#define ADDRWIN_WIN3 3
> +
> +#define ADDRWIN_MAP_DST_DDR  0
> +#define ADDRWIN_MAP_DST_PCI  1
> +#define ADDRWIN_MAP_DST_LIO  1
> +
> +/*
> + * s: CPU, PCIDMA
> + * d: DDR, PCI, LIO
> + * win: 0, 1, 2, 3
> + * src: map source
> + * dst: map destination
> + * size: ~mask + 1
> + */
> +#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
> +     s##_WIN##w##_BASE = (src); \
> +     s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \
> +     s##_WIN##w##_MASK = ~(size-1); \
> +} while (0)
> +
> +#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \
> +     LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size)
> +#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \
> +     LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size)
> +#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \
> +     LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size)
> +
> +#endif       /* ! CONFIG_CPU_LOONGSON2F && CONFIG_64BIT */
> +
>  #endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
> diff --git a/arch/mips/include/asm/mach-loongson/mem.h 
> b/arch/mips/include/asm/mach-loongson/mem.h
> index bd7b3cb..5c6551d 100644
> --- a/arch/mips/include/asm/mach-loongson/mem.h
> +++ b/arch/mips/include/asm/mach-loongson/mem.h
> @@ -12,19 +12,30 @@
>  #define __ASM_MACH_LOONGSON_MEM_H
>  
>  /*
> - * On Lemote Loongson 2e
> + * high memory space
>   *
> - * the high memory space starts from 512M.
> - * the peripheral registers reside between 0x1000:0000 and 0x2000:0000.
> + * in loongson2e, starts from 512M
> + * in loongson2f, starts from 2G 256M
>   */
> +#ifdef CONFIG_CPU_LOONGSON2E
> +#define LOONGSON_HIGHMEM_START       0x20000000
> +#else
> +#define LOONGSON_HIGHMEM_START       0x90000000
> +#endif
>  
> -#ifdef CONFIG_LEMOTE_FULOONG2E
> -
> -#define LOONGSON_HIGHMEM_START  0x20000000
> +/*
> + * the peripheral registers(MMIO):
> + *
> + * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 
> 0x2000:0000.
> + * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 
> 0x8000:0000.
> + */
>  
>  #define LOONGSON_MMIO_MEM_START 0x10000000
> -#define LOONGSON_MMIO_MEM_END   0x20000000
>  
> +#ifdef CONFIG_CPU_LOONGSON2E
> +#define LOONGSON_MMIO_MEM_END        0x20000000
> +#else
> +#define LOONGSON_MMIO_MEM_END        0x80000000
>  #endif
>  
>  #endif /* __ASM_MACH_LOONGSON_MEM_H */
> diff --git a/arch/mips/include/asm/mach-loongson/pci.h 
> b/arch/mips/include/asm/mach-loongson/pci.h
> index 576487c..31ba908 100644
> --- a/arch/mips/include/asm/mach-loongson/pci.h
> +++ b/arch/mips/include/asm/mach-loongson/pci.h
> @@ -1,5 +1,6 @@
>  /*
>   * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
> + * Copyright (c) 2009 Wu Zhangjin <wuzj@lemote.com>
>   *
>   * This program is free software; you can redistribute it
>   * and/or modify it under the terms of the GNU General
> @@ -24,7 +25,30 @@
>  
>  extern struct pci_ops loongson_pci_ops;
>  
> -#ifdef CONFIG_LEMOTE_FULOONG2E
> +/* this is an offset from mips_io_port_base */
> +#define LOONGSON_PCI_IO_START        0x00004000UL
> +
> +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +
> +/*
> + * we use address window2 to map cpu address space to pci space
> + * window2: cpu [1G, 2G] -> pci [1G, 2G]
> + * why not use window 0 & 1? because they are used by cpu when booting.
> + * window0: cpu [0, 256M] -> ddr [0, 256M]
> + * window1: cpu [256M, 512M] -> pci [256M, 512M]
> + */
> +
> +/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */
> +#define LOONGSON_CPU_MEM_SRC 0x40000000ul            /* 1G */
> +#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC
> +
> +#define LOONGSON_PCI_MEM_START       LOONGSON_PCI_MEM_DST
> +#define LOONGSON_PCI_MEM_END (0x80000000ul-1)        /* 2G */
> +
> +#define MMAP_CPUTOPCI_SIZE   (LOONGSON_PCI_MEM_END - \
> +                                     LOONGSON_PCI_MEM_START + 1)
> +
> +#else        /* loongson2f/32bit & loongson2e */
>  
>  /* this pci memory space is mapped by pcimap in pci.c */
>  #define LOONGSON_PCI_MEM_START       LOONGSON_PCILO1_BASE
> @@ -32,6 +56,6 @@ extern struct pci_ops loongson_pci_ops;
>  /* this is an offset from mips_io_port_base */
>  #define LOONGSON_PCI_IO_START        0x00004000UL
>  
> -#endif
> +#endif       /* !(defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT))*/
>  
>  #endif /* !__ASM_MACH_LOONGSON_PCI_H_ */
> diff --git a/arch/mips/loongson/common/bonito-irq.c 
> b/arch/mips/loongson/common/bonito-irq.c
> index a1cbd11..9c1ddae 100644
> --- a/arch/mips/loongson/common/bonito-irq.c
> +++ b/arch/mips/loongson/common/bonito-irq.c
> @@ -35,10 +35,13 @@ static struct irq_chip bonito_irq_type = {
>       .unmask = bonito_irq_enable,
>  };
>  
> +/* there is no need to handle dma timeout in loongson-2f based machines */
> +#ifdef CONFIG_CPU_LOONGSON2E
>  static struct irqaction dma_timeout_irqaction = {
>       .handler        = no_action,
>       .name           = "dma_timeout",
>  };
> +#endif

This #ifdef only seems to be used to suppress a warning.  You can make
that a little nicer by:

#include <linux/compiler.h>

static struct irqaction __maybe_unused dma_timeout_irqaction = {
[...]
};

>  
>  void bonito_irq_init(void)
>  {
> @@ -47,5 +50,7 @@ void bonito_irq_init(void)
>       for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++)
>               set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
>  
> +#ifdef CONFIG_CPU_LOONGSON2E
>       setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
> +#endif
>  }
> diff --git a/arch/mips/loongson/common/init.c 
> b/arch/mips/loongson/common/init.c
> index b7e4913..4afca97 100644
> --- a/arch/mips/loongson/common/init.c
> +++ b/arch/mips/loongson/common/init.c
> @@ -14,12 +14,30 @@
>  
>  #include <loongson.h>
>  
> +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +unsigned long _loongson_addrwincfg_base;
> +
> +/* Loongson CPU address windows config space base address */
> +static inline void set_loongson_addrwincfg_base(void)
> +{
> +     *(unsigned long *)&_loongson_addrwincfg_base = (unsigned long)
> +             ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
> +     barrier();
> +}
> +#else
> +static inline void set_loongson_addrwincfg_base(void)
> +{
> +}
> +#endif
> +
>  void __init prom_init(void)
>  {
>      /* init base address of io space */
>       set_io_port_base((unsigned long)
>               ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
>  
> +     set_loongson_addrwincfg_base();
> +
>       prom_init_cmdline();
>       prom_init_env();
>       prom_init_memory();
> diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
> index 47a20de..45991af 100644
> --- a/arch/mips/loongson/common/mem.c
> +++ b/arch/mips/loongson/common/mem.c
> @@ -21,6 +21,23 @@ void __init prom_init_memory(void)
>      add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
>                           20), BOOT_MEM_RESERVED);
>  #ifdef CONFIG_64BIT
> +#ifdef CONFIG_CPU_LOONGSON2F
> +     {
> +             int bit;
> +
> +             bit = fls(memsize + highmemsize);
> +             if (bit != ffs(memsize + highmemsize))
> +                     bit += 20;
> +             else
> +                     bit = bit + 20 - 1;
> +
> +             /* set cpu window3 to map CPU to DDR: 2G -> 2G */
> +             LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul,
> +                                       0x80000000ul, (1 << bit));
> +             mmiowb();
> +     }
> +#endif       /* CONFIG_CPU_LOONGSON2F */
> +
>      if (highmemsize > 0)
>       add_memory_region(LOONGSON_HIGHMEM_START,
>               highmemsize << 20, BOOT_MEM_RAM);
> diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c
> index a7eb8b9..eac43b8 100644
> --- a/arch/mips/loongson/common/pci.c
> +++ b/arch/mips/loongson/common/pci.c
> @@ -67,6 +67,14 @@ static void __init setup_pcimap(void)
>       /* can not change gnt to break pci transfer when device's gnt not
>       deassert for some broken device */
>       LOONGSON_PXARB_CFG = 0x00fe0105ul;
> +
> +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +     /*
> +      * set cpu addr window2 to map CPU address space to PCI address space
> +      */
> +     LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC,
> +             LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE);
> +#endif
>  }
>  
>  static int __init pcibios_init(void)
> -- 
> 1.6.2.1

<Prev in Thread] Current Thread [Next in Thread>