linux-mips
[Top] [All Lists]

[PATCH] alchemy: add au1000-eth platform device (v2)

Subject: [PATCH] alchemy: add au1000-eth platform device (v2)
From: Florian Fainelli <florian@openwrt.org>
Date: Tue, 18 Aug 2009 17:53:21 +0200
This patch makes the board code register the au1000-eth
platform device. The au1000-eth platform data can be
overriden with the au1xxx_override_eth0_cfg function
like it has to be done for the Bosporus board.

Changes from v1:
- remove per-board platform.c file
- add an override function to pass custom eth0 platform_data PHY settings

Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
diff --git a/arch/mips/alchemy/common/platform.c 
b/arch/mips/alchemy/common/platform.c
index 117f99f..559294a 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -19,6 +19,7 @@
 #include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
 
 #define PORT(_base, _irq)                              \
        {                                               \
@@ -331,6 +332,76 @@ static struct platform_device pbdb_smbus_device = {
 };
 #endif
 
+/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES(_base, _enable, _irq)                  \
+       {                                               \
+               .start  = CPHYSADDR(_base),             \
+               .end    = CPHYSADDR(_base + 0xffff),    \
+               .flags  = IORESOURCE_MEM,               \
+       },                                              \
+       {                                               \
+               .start  = CPHYSADDR(_enable),           \
+               .end    = CPHYSADDR(_enable + 0x3),     \
+               .flags  = IORESOURCE_MEM,               \
+       },                                              \
+       {                                               \
+               .start  = _irq,                         \
+               .end    = _irq,                         \
+               .flags  = IORESOURCE_IRQ                \
+       }
+
+static struct resource au1xxx_eth0_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+       MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1100)
+       MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+       MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+       MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
+#endif
+};
+
+static struct resource au1xxx_eth1_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+       MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+       MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+       MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
+#endif
+};
+
+static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
+       .phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth0_device = {
+       .name           = "au1000-eth",
+       .id             = 0,
+       .num_resources  = ARRAY_SIZE(au1xxx_eth0_resources),
+       .resource       = au1xxx_eth0_resources,
+       .dev.platform_data = &au1xxx_eth0_platform_data,
+};
+
+#ifndef CONFIG_SOC_AU1100
+static struct platform_device au1xxx_eth1_device = {
+       .name           = "au1000-eth",
+       .id             = 1,
+       .num_resources  = ARRAY_SIZE(au1xxx_eth1_resources),
+       .resource       = au1xxx_eth1_resources,
+};
+#endif
+
+void __init au1xxx_override_eth0_cfg(struct au1000_eth_platform_data *eth_data)
+{
+       if (!eth_data)
+               return;
+
+       memcpy(&au1xxx_eth0_platform_data, eth_data,
+               sizeof(struct au1000_eth_platform_data));
+}
+
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
        &au1xx0_uart_device,
        &au1xxx_usb_ohci_device,
@@ -351,17 +422,25 @@ static struct platform_device *au1xxx_platform_devices[] 
__initdata = {
 #ifdef SMBUS_PSC_BASE
        &pbdb_smbus_device,
 #endif
+       &au1xxx_eth0_device,
 };
 
 static int __init au1xxx_platform_init(void)
 {
        unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
-       int i;
+       int i, ni;
 
        /* Fill up uartclk. */
        for (i = 0; au1x00_uart_data[i].flags; i++)
                au1x00_uart_data[i].uartclk = uartclk;
 
+       /* Register second MAC if enabled in pinfunc */
+#ifndef CONFIG_SOC_AU1100
+       ni = (int)((au_readl(SYS_PINFUNC) & (u32)(SYS_PF_NI2)) >> 4);
+       if (!(ni + 1))
+               platform_device_register(&au1xxx_eth1_device);
+#endif
+
        return platform_add_devices(au1xxx_platform_devices,
                                    ARRAY_SIZE(au1xxx_platform_devices));
 }
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c 
b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index de30d8e..4d2d32c 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -32,6 +32,7 @@
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/db1x00.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
 
 #include <prom.h>
 
@@ -134,6 +135,22 @@ void __init board_setup(void)
        printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
 #endif
 #ifdef CONFIG_MIPS_BOSPORUS
+       struct au1000_eth_platform_data eth0_pdata;
+
+       /*
+        * Micrel/Kendin 5 port switch attached to MAC0,
+        * MAC0 is associated with PHY address 5 (== WAN port)
+        * MAC1 is not associated with any PHY, since it's connected directly
+        * to the switch.
+        * no interrupts are used
+        */
+       eth0_pdata.phy1_search_mac0 = 0;
+       eth0_pdata.phy_static_config = 1;
+       eth0_pdata.phy_addr = 5;
+       eth0_pdata.phy_busid = 0;
+
+       au1xxx_override_eth0_cfg(&eth0_pdata);
+
        printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
 #endif
 #ifdef CONFIG_MIPS_MIRAGE
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h 
b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
new file mode 100644
index 0000000..876187e
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
@@ -0,0 +1,17 @@
+#ifndef __AU1X00_ETH_DATA_H
+#define __AU1X00_ETH_DATA_H
+
+/* Platform specific PHY configuration passed to the MAC driver */
+struct au1000_eth_platform_data {
+       int phy_static_config;
+       int phy_search_highest_addr;
+       int phy1_search_mac0;
+       int phy_addr;
+       int phy_busid;
+       int phy_irq;
+};
+
+void __init au1xxx_override_eth0_cfg(struct au1000_eth_platform_data 
*eth_data);
+
+#endif /* __AU1X00_ETH_DATA_H */
+
-- 
1.6.3.rc3


<Prev in Thread] Current Thread [Next in Thread>
  • [PATCH] alchemy: add au1000-eth platform device (v2), Florian Fainelli <=