Hi Manuel,
Le Wednesday 03 June 2009 18:18:03 Manuel Lauss, vous avez écrit :
> Rewrite Alchemy GPIO support to be compatible with the Linux
> GPIO framework, both with and without gpiolib. For a list of
> justifications, see blurb in patch #2.
> Patches #3-#5 replace a few open-coded GPIO accesses in the board
> files with calls to the new gpio functions.
>
> Tested on DB1200 and a custom Au1200 platform.
>
> v6 - renamed gpio.[ch] to gpio-au1000.[ch], since this code only affects
> pre-Au1300 chips. Should make integration of Au1300 GPIO a bit
> easier.
> v5 - fix gpio1 bug in inlined gpio_get_value()
> v4 - GPIO2 shared interrupt management, styling.
> v3 - fixed thinko in alchemy_gpio2_set_value (16->32 bit)
> v2 - added gpio_to_irq and irq_to_gpio, some renaming.
Thanks for this work ! For the whole serie you got my Acked-by: Florian
Fainelli <florian@openwrt.org>. Thanks !
>
> Manuel Lauss (5):
> Alchemy: remove unused au1000_gpio.h header
> Alchemy: rewrite GPIO support.
> Alchemy: mtx-1: use linux gpio api.
> Alchemy: xxs1500: use linux gpio api.
> Alchemy: devboards: convert to gpio calls.
>
> arch/mips/Makefile | 5 +-
> arch/mips/alchemy/Kconfig | 19 +-
> arch/mips/alchemy/common/Makefile | 11 +-
> arch/mips/alchemy/common/gpio-au1000.c | 130 +++++
> arch/mips/alchemy/common/gpio.c | 201 -------
> arch/mips/alchemy/common/reset.c | 5 +-
> arch/mips/alchemy/devboards/db1x00/board_setup.c | 8 +-
> arch/mips/alchemy/devboards/pb1000/board_setup.c | 10 +-
> arch/mips/alchemy/devboards/pb1100/board_setup.c | 3 +-
> arch/mips/alchemy/devboards/pb1500/board_setup.c | 10 +-
> arch/mips/alchemy/devboards/pm.c | 2 +-
> arch/mips/alchemy/mtx-1/board_setup.c | 24 +-
> arch/mips/alchemy/xxs1500/board_setup.c | 21 +-
> arch/mips/include/asm/mach-au1x00/au1000_gpio.h | 56 --
> arch/mips/include/asm/mach-au1x00/gpio-au1000.h | 604
> ++++++++++++++++++++++ arch/mips/include/asm/mach-au1x00/gpio.h |
> 35 +-
> 16 files changed, 818 insertions(+), 326 deletions(-)
> create mode 100644 arch/mips/alchemy/common/gpio-au1000.c
> delete mode 100644 arch/mips/alchemy/common/gpio.c
> delete mode 100644 arch/mips/include/asm/mach-au1x00/au1000_gpio.h
> create mode 100644 arch/mips/include/asm/mach-au1x00/gpio-au1000.h
--
Best regards, Florian Fainelli
Email : florian@openwrt.org
http://openwrt.org
-------------------------------
|