linux-mips
[Top] [All Lists]

[PATCH 10/10] bcm63xx: clarify meaning of the magical value in ehci-bcm6

To: linux-mips@linux-mips.org, Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH 10/10] bcm63xx: clarify meaning of the magical value in ehci-bcm63xx.c
From: Maxime Bizon <mbizon@freebox.fr>
Date: Mon, 1 Jun 2009 19:21:58 +0200
Cc: Florian Fainelli <florian@openwrt.org>, Maxime Bizon <mbizon@freebox.fr>
In-reply-to: <1243876918-9905-1-git-send-email-mbizon@freebox.fr>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1243876918-9905-1-git-send-email-mbizon@freebox.fr>
Sender: linux-mips-bounce@linux-mips.org
USB maintainer asked for clarification of the magic value used during
USB init. Be clear about the source of it.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
 drivers/usb/host/ehci-bcm63xx.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/host/ehci-bcm63xx.c b/drivers/usb/host/ehci-bcm63xx.c
index 8a62c0a..5a03fdd 100644
--- a/drivers/usb/host/ehci-bcm63xx.c
+++ b/drivers/usb/host/ehci-bcm63xx.c
@@ -78,7 +78,9 @@ static int __devinit ehci_hcd_bcm63xx_drv_probe(struct 
platform_device *pdev)
        reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
        bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
 
-       /* don't ask... */
+       /* the magic value comes for the original vendor BSP and is
+        * needed for USB to work. Datasheet does not help, so the
+        * magic value is used as-is. */
        bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
 
        hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
-- 
1.6.0.4


<Prev in Thread] Current Thread [Next in Thread>