linux-mips
[Top] [All Lists]

[loongson-PATCH-v2 12/23] enable serial port support of loongson-based m

To: linux-mips@linux-mips.org, Ralf Baechle <ralf@linux-mips.org>
Subject: [loongson-PATCH-v2 12/23] enable serial port support of loongson-based machines
From: wuzhangjin@gmail.com
Date: Wed, 27 May 2009 03:07:03 +0800
Cc: Wu Zhangjin <wuzj@lemote.com>, Yan Hua <yanh@lemote.com>, Philippe Vachon <philippe@cowpig.ca>, Zhang Le <r0bertz@gentoo.org>, Zhang Fuxin <zhangfx@lemote.com>, loongson-dev <loongson-dev@googlegroups.com>, Nicholas Mc Guire <der.herr@hofr.at>, Liu Junliang <liujl@lemote.com>, Erwan Lerale <erwan@thiscow.com>, Wu Zhangjin <wuzhangjin@gmail.com>
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:cc:subject:date :message-id:x-mailer:in-reply-to:references; bh=RWy/PmsWjAW4n6HuZ4knLkZK/OkfalPiZlfmShCfO6k=; b=E2tkr7qCKYUpm2SPF/ZZ4SoDUVx394c9VjbZUo/HYWqu+GIUNH9rPZz03gy623mYft OmChGnjletsqaRQQ6MlOMViWkTbmQLzlAd6c7D0tcl/uiXafnU+WXBGp/RQCqTbQUj5r EIKn7hhkqNPVOJh4WoWx8SUsCOMxXqf/g7LFM=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:subject:date:message-id:x-mailer:in-reply-to:references; b=A6KB8Htm3YVRmRl9aKoqKmrvrVxZjg4PyYtmEwMdvlc0TN49rNjnV6zpF0w+9n1LfE rBdIwDD2wtPzCbO5MoV0zyIv+V0Ew1gst5b14Pbt4PyBfSjwUP5SDD9NYUhFJMx0793v lBRZeAHW0MpmEA9whI9/80vPUNVxSgIRDt8X4=
In-reply-to: <cover.1243362545.git.wuzj@lemote.com>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <cover.1243362545.git.wuzj@lemote.com>
Sender: linux-mips-bounce@linux-mips.org
From: Wu Zhangjin <wuzj@lemote.com>

this serial port support is portable to loongson-based machines, the old
serial port support in fuloong(2e) via HAVE_STD_PC_SERIAL_PORT is
replaced by this implementation.

before, only fuloong(2e) used HAVE_STD_PC_SERIAL_PORT kernel option, so,
with this new support, we can remove arch/mips/kernel/8250-platform.c
directly. but in this patch, that file is reserved there for potential
use in the other machines.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
---
 arch/mips/include/asm/mach-loongson/machine.h |    4 ++
 arch/mips/loongson/Kconfig                    |    1 -
 arch/mips/loongson/common/Makefile            |    5 ++
 arch/mips/loongson/common/serial.c            |   64 +++++++++++++++++++++++++
 4 files changed, 73 insertions(+), 1 deletions(-)
 create mode 100644 arch/mips/loongson/common/serial.c

diff --git a/arch/mips/include/asm/mach-loongson/machine.h 
b/arch/mips/include/asm/mach-loongson/machine.h
index bb3dd37..73ff14d 100644
--- a/arch/mips/include/asm/mach-loongson/machine.h
+++ b/arch/mips/include/asm/mach-loongson/machine.h
@@ -18,6 +18,8 @@
 #define MACH_NAME                      "lemote-fuloong(2e)"
 
 #define LOONGSON_UART_BASE             0x1fd003f8
+#define        LOONGSON_UART_BAUD              1843200
+#define        LOONGSON_UART_IOTYPE            UPIO_PORT
 
 #define LOONGSON_NORTH_BRIDGE_IRQ      (MIPS_CPU_IRQ_BASE + 2)
 #define LOONGSON_UART_IRQ              (MIPS_CPU_IRQ_BASE + 4)
@@ -30,6 +32,8 @@
 #define MACH_NAME                      "lemote-fuloong(2f)"
 
 #define LOONGSON_UART_BASE             0x1fd002f8
+#define LOONGSON_UART_BAUD             1843200
+#define LOONGSON_UART_IOTYPE           UPIO_PORT
 
 #define LOONGSON_TIMER_IRQ     (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
 #define LOONGSON_PERFCNT_IRQ   (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 2bfda6e..0547907 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -11,7 +11,6 @@ config LEMOTE_FULOONG2E
        select DMA_NONCOHERENT
        select BOOT_ELF32
        select BOARD_SCACHE
-       select HAVE_STD_PC_SERIAL_PORT
        select HW_HAS_PCI
        select I8259
        select ISA
diff --git a/arch/mips/loongson/common/Makefile 
b/arch/mips/loongson/common/Makefile
index 71a4ea7..06ae7f6 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -23,4 +23,9 @@ obj-$(CONFIG_RTC_DRV_CMOS) += rtc.o
 #
 obj-$(CONFIG_CS5536) += cs5536/
 
+#
+# Enable serial port
+#
+obj-$(CONFIG_SERIAL_8250) += serial.o
+
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/loongson/common/serial.c 
b/arch/mips/loongson/common/serial.c
new file mode 100644
index 0000000..335dbe3
--- /dev/null
+++ b/arch/mips/loongson/common/serial.c
@@ -0,0 +1,64 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: yanhua (yanhua@lemote.com)
+ * Author: Wu Zhangjin (wuzj@lemote.com)
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#include <machine.h>
+
+#define PORT(int, base_baud, io_type)                          \
+{                                                              \
+       .irq            = int,                                  \
+       .uartclk        = base_baud,                            \
+       .iotype         = io_type,                              \
+       .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,    \
+       .regshift       = 0,                                    \
+}
+
+static struct plat_serial8250_port uart8250_data[] = {
+       PORT(LOONGSON_UART_IRQ, LOONGSON_UART_BAUD, LOONGSON_UART_IOTYPE),
+       {},
+};
+
+static struct platform_device uart8250_device = {
+       .name = "serial8250",
+       .id = PLAT8250_DEV_PLATFORM,
+       .dev = {
+               .platform_data = uart8250_data,
+               },
+};
+
+static inline void uart8250_init(void)
+{
+#if (LOONGSON_UART_IOTYPE == UPIO_MEM)
+               uart8250_data[0].membase =
+                   ioremap_nocache(LOONGSON_UART_BASE, 8);
+#elif (LOONGSON_UART_IOTYPE == UPIO_PORT)
+               uart8250_data[0].iobase = LOONGSON_UART_BASE & 0x3ff;
+               uart8250_data[0].irq -= MIPS_CPU_IRQ_BASE;
+#else
+#warning currently, no such iotype of uart used in loongson-based machines
+
+#endif
+}
+
+static int __init serial_init(void)
+{
+       uart8250_init();
+
+       platform_device_register(&uart8250_device);
+
+       return 0;
+}
+
+device_initcall(serial_init);
-- 
1.6.0.4


<Prev in Thread] Current Thread [Next in Thread>