[PATCH] Don't use ttyS* serial device name for board specific PNX8XXX UART serial

[Ihar Hrachyshka <ihar.hrachyshka@gmail.com>]

Don't use ttyS* serial device name for board specific PNX8XXX UART
serial. Rather create ttySA* to reflect that the driver uses device with
major:minor numbers for SA1100 serial driver.

Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@gmail.com>
---
 drivers/serial/pnx8xxx_uart.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index 22e30d2..6785ee9 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -636,7 +636,7 @@ static struct uart_ops pnx8xxx_pops = {
 /*
  * Setup the PNX8XXX serial ports.
  *
- * Note also that we support "console=ttySx" where "x" is either 0 or 1.
+ * Note also that we support "console=ttySAx" where "x" is either 0 or 1.
  */
 static void __init pnx8xxx_init_ports(void)
 {
@@ -728,7 +728,7 @@ pnx8xxx_console_setup(struct console *co, char *options)
 
 static struct uart_driver pnx8xxx_reg;
 static struct console pnx8xxx_console = {
-       .name           = "ttyS",
+       .name           = "ttySA",
        .write          = pnx8xxx_console_write,
        .device         = uart_console_device,
        .setup          = pnx8xxx_console_setup,
@@ -752,8 +752,8 @@ console_initcall(pnx8xxx_rs_console_init);
 
 static struct uart_driver pnx8xxx_reg = {
        .owner                  = THIS_MODULE,
-       .driver_name            = "ttyS",
-       .dev_name               = "ttyS",
+       .driver_name            = "ttySA",
+       .dev_name               = "ttySA",
        .major                  = SERIAL_PNX8XXX_MAJOR,
        .minor                  = MINOR_START,
        .nr                     = NR_PORTS,
-- 
1.5.6.3