linux-mips
[Top] [All Lists]

[PATCH] [MIPS] Remove unused header file gio.h

To: ralf@linux-mips.org, linux-mips@linux-mips.org
Subject: [PATCH] [MIPS] Remove unused header file gio.h
From: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Date: Wed, 26 Nov 2008 15:34:32 +0200
Cc: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Grepping reveals that arch/mips/include/asm/sgi/gio.h is
not used by anyone, so let's delete the orphan header.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
---
 arch/mips/include/asm/sgi/gio.h |   86 ---------------------------------------
 1 files changed, 0 insertions(+), 86 deletions(-)
 delete mode 100644 arch/mips/include/asm/sgi/gio.h

diff --git a/arch/mips/include/asm/sgi/gio.h b/arch/mips/include/asm/sgi/gio.h
deleted file mode 100644
index 889cf02..0000000
--- a/arch/mips/include/asm/sgi/gio.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * gio.h: Definitions for SGI GIO bus
- *
- * Copyright (C) 2002 Ladislav Michl
- */
-
-#ifndef _SGI_GIO_H
-#define _SGI_GIO_H
-
-/*
- * GIO bus addresses
- *
- * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have
- * three physical connectors, but only two slots, GFX and EXP0.
- *
- * There is 10MB of GIO address space for GIO64 slot devices
- * slot#   slot type address range            size
- * -----   --------- ----------------------- -----
- *   0     GFX       0x1f000000 - 0x1f3fffff   4MB
- *   1     EXP0      0x1f400000 - 0x1f5fffff   2MB
- *   2     EXP1      0x1f600000 - 0x1f9fffff   4MB
- *
- * There are un-slotted devices, HPC, I/O and misc devices, which are grouped
- * into the HPC address space.
- *   -     MISC      0x1fb00000 - 0x1fbfffff   1MB
- *
- * Following space is reserved and unused
- *   -     RESERVED  0x18000000 - 0x1effffff 112MB
- *
- * GIO bus IDs
- *
- * Each GIO bus device identifies itself to the system by answering a
- * read with an "ID" value. IDs are either 8 or 32 bits long. IDs less
- * than 128 are 8 bits long, with the most significant 24 bits read from
- * the slot undefined.
- *
- * 32-bit IDs are divided into
- *     bits 0:6        the product ID; ranges from 0x00 to 0x7F.
- *     bit 7           0=GIO Product ID is 8 bits wide
- *                     1=GIO Product ID is 32 bits wide.
- *     bits 8:15       manufacturer version for the product.
- *     bit 16          0=GIO32 and GIO32-bis, 1=GIO64.
- *     bit 17          0=no ROM present
- *                     1=ROM present on this board AND next three words
- *                     space define the ROM.
- *     bits 18:31      up to manufacturer.
- *
- * IDs above 0x50/0xd0 are of 3rd party boards.
- *
- * 8-bit IDs
- *     0x01            XPI low cost FDDI
- *     0x02            GTR TokenRing
- *     0x04            Synchronous ISDN
- *     0x05            ATM board [*]
- *     0x06            Canon Interface
- *     0x07            16 bit SCSI Card [*]
- *     0x08            JPEG (Double Wide)
- *     0x09            JPEG (Single Wide)
- *     0x0a            XPI mez. FDDI device 0
- *     0x0b            XPI mez. FDDI device 1
- *     0x0c            SMPTE 259M Video [*]
- *     0x0d            Babblefish Compression [*]
- *     0x0e            E-Plex 8-port Ethernet
- *     0x30            Lyon Lamb IVAS
- *     0xb8            GIO 100BaseTX Fast Ethernet (gfe)
- *
- * [*] Device provide 32-bit ID.
- *
- */
-
-#define GIO_ID(x)              (x & 0x7f)
-#define GIO_32BIT_ID           0x80
-#define GIO_REV(x)             ((x >> 8) & 0xff)
-#define GIO_64BIT_IFACE                0x10000
-#define GIO_ROM_PRESENT                0x20000
-#define GIO_VENDOR_CODE(x)     ((x >> 18) & 0x3fff)
-
-#define GIO_SLOT_GFX_BASE      0x1f000000
-#define GIO_SLOT_EXP0_BASE     0x1f400000
-#define GIO_SLOT_EXP1_BASE     0x1f600000
-
-#endif /* _SGI_GIO_H */
-- 
1.5.3


<Prev in Thread] Current Thread [Next in Thread>