linux-mips
[Top] [All Lists]

[PATCH 09/14] RBTX4938: Add TOSHIBA_RBTX4938_MPLEX_KEEP

To: linux-mips@linux-mips.org
Subject: [PATCH 09/14] RBTX4938: Add TOSHIBA_RBTX4938_MPLEX_KEEP
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Tue, 19 Aug 2008 22:55:13 +0900
Cc: ralf@linux-mips.org
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Add TOSHIBA_RBTX4938_MPLEX_KEEP to keep MPLEX settings by firmware.
Also replace some printk with pr_info.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
---
 arch/mips/txx9/Kconfig          |    2 ++
 arch/mips/txx9/rbtx4938/setup.c |   13 ++++++++++---
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 6fb2ef0..aade334 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -94,6 +94,8 @@ config TOSHIBA_RBTX4938_MPLEX_NAND
        bool "NAND"
 config TOSHIBA_RBTX4938_MPLEX_ATA
        bool "ATA"
+config TOSHIBA_RBTX4938_MPLEX_KEEP
+       bool "Keep firmware settings"
 
 endchoice
 
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index e7bc5b8..7aba92a 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -174,23 +174,30 @@ static void __init rbtx4938_mem_setup(void)
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-       printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
+       pr_info("PIOSEL: disabling both ATA and NAND selection\n");
        txx9_clear64(&tx4938_ccfgptr->pcfg,
                     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-       printk(KERN_INFO "PIOSEL: enabling nand selection\n");
+       pr_info("PIOSEL: enabling NAND selection\n");
        txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
        txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-       printk(KERN_INFO "PIOSEL: enabling ata selection\n");
+       pr_info("PIOSEL: enabling ATA selection\n");
        txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
        txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 #endif
 
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP
+       pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+       pr_info("PIOSEL: NAND %s, ATA %s\n",
+               (pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled",
+               (pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled");
+#endif
+
        rbtx4938_spi_setup();
        pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);    /* updated */
        /* fixup piosel */
-- 
1.5.6.3


<Prev in Thread] Current Thread [Next in Thread>
  • [PATCH 09/14] RBTX4938: Add TOSHIBA_RBTX4938_MPLEX_KEEP, Atsushi Nemoto <=