linux-mips
[Top] [All Lists]

Re: SGI O2 sound driver v6

To: linux-mips@linux-mips.org
Subject: Re: SGI O2 sound driver v6
From: tsbogend@alpha.franken.de (Thomas Bogendoerfer)
Date: Sat, 5 Jul 2008 00:51:06 +0200
In-reply-to: <20080702232118.GB18226@alpha.franken.de>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <20080628000916.GA22049@alpha.franken.de> <20080628141336.GA17727@alpha.franken.de> <20080628224553.GA2064@alpha.franken.de> <20080629223537.GA697@alpha.franken.de> <20080702232118.GB18226@alpha.franken.de>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.5.13 (2006-08-11)
On Thu, Jul 03, 2008 at 01:21:18AM +0200, Thomas Bogendoerfer wrote:
> [...]

changes in v6:

- fixed mmap setup
- capture is working now
- reworked all mixer controls
- added dma error interrupt
- fixed button detection in input driver

This is the final complete patch. I'm now going to split the patch
into pieces for submission to the different maintainers.

Thomas.


 arch/mips/sgi-ip32/ip32-platform.c |   36 ++
 drivers/input/misc/Kconfig         |   10 +
 drivers/input/misc/Makefile        |    1 +
 drivers/input/misc/sgio2_btns.c    |  154 ++++++
 include/sound/ad1843.h             |   46 ++
 sound/mips/Kconfig                 |    6 +
 sound/mips/Makefile                |    2 +
 sound/mips/ad1843.c                |  539 +++++++++++++++++++
 sound/mips/sgio2audio.c            | 1013 ++++++++++++++++++++++++++++++++++++
 9 files changed, 1807 insertions(+), 0 deletions(-)

diff --git a/arch/mips/sgi-ip32/ip32-platform.c 
b/arch/mips/sgi-ip32/ip32-platform.c
index 89a71f4..2ee401b 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -65,6 +65,42 @@ static __init int meth_devinit(void)
 
 device_initcall(meth_devinit);
 
+static __init int sgio2audio_devinit(void)
+{
+       struct platform_device *pd;
+       int ret;
+
+       pd = platform_device_alloc("sgio2audio", -1);
+       if (!pd)
+               return -ENOMEM;
+
+       ret = platform_device_add(pd);
+       if (ret)
+               platform_device_put(pd);
+
+       return ret;
+}
+
+device_initcall(sgio2audio_devinit);
+
+static __init int sgio2btns_devinit(void)
+{
+       struct platform_device *pd;
+       int ret;
+
+       pd = platform_device_alloc("sgio2btns", -1);
+       if (!pd)
+               return -ENOMEM;
+
+       ret = platform_device_add(pd);
+       if (ret)
+               platform_device_put(pd);
+
+       return ret;
+}
+
+device_initcall(sgio2btns_devinit);
+
 MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 432699d..e33d7cb 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -189,6 +189,16 @@ config INPUT_UINPUT
          To compile this driver as a module, choose M here: the
          module will be called uinput.
 
+config INPUT_SGIO2_BTNS
+       tristate "SGI O2 volume button interface"
+       depends on SGI_IP32
+       select INPUT_POLLDEV
+       help
+         Say Y here if you want to support SGI O2 volume button interface.
+
+         To compile this driver as a module, choose M here: the
+         module will be called sgio_btns.
+
 config HP_SDC_RTC
        tristate "HP SDC Real Time Clock"
        depends on GSC || HP300
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index ebd39f2..0e274f1 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_INPUT_YEALINK)           += yealink.o
 obj-$(CONFIG_HP_SDC_RTC)               += hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_UINPUT)             += uinput.o
 obj-$(CONFIG_INPUT_APANEL)             += apanel.o
+obj-$(CONFIG_INPUT_SGIO2_BTNS)         += sgio2_btns.o
diff --git a/drivers/input/misc/sgio2_btns.c b/drivers/input/misc/sgio2_btns.c
new file mode 100644
index 0000000..5029873
--- /dev/null
+++ b/drivers/input/misc/sgio2_btns.c
@@ -0,0 +1,154 @@
+/*
+ *  Cobalt button interface driver.
+ *
+ *  Copyright (C) 2007-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 
USA
+ */
+#include <linux/init.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/ip32/mace.h>
+
+#define BUTTONS_POLL_INTERVAL  30      /* msec */
+#define BUTTONS_COUNT_THRESHOLD        3
+
+static const unsigned short sgio2_map[] = {
+       KEY_VOLUMEUP,
+       KEY_VOLUMEDOWN
+};
+
+struct buttons_dev {
+       struct input_polled_dev *poll_dev;
+       unsigned short keymap[ARRAY_SIZE(sgio2_map)];
+       int count[ARRAY_SIZE(sgio2_map)];
+       void __iomem *reg;
+};
+
+static void handle_buttons(struct input_polled_dev *dev)
+{
+       struct buttons_dev *bdev = dev->private;
+       struct input_dev *input = dev->input;
+       u64 status;
+       int i;
+
+       status = (readq(&mace->perif.audio.control) >> 23) & 3;
+
+       for (i = 0; i < ARRAY_SIZE(bdev->keymap); i++) {
+               if (status & (1U << i)) {
+                       writeq(status & ~(1U << i), &mace->perif.audio.control);
+                       if (++bdev->count[i] == BUTTONS_COUNT_THRESHOLD) {
+                               input_event(input, EV_MSC, MSC_SCAN, i);
+                               input_report_key(input, bdev->keymap[i], 1);
+                               input_sync(input);
+                       }
+               } else {
+                       if (bdev->count[i] >= BUTTONS_COUNT_THRESHOLD) {
+                               input_event(input, EV_MSC, MSC_SCAN, i);
+                               input_report_key(input, bdev->keymap[i], 0);
+                               input_sync(input);
+                       }
+                       bdev->count[i] = 0;
+               }
+       }
+}
+
+static int __devinit sgio2_buttons_probe(struct platform_device *pdev)
+{
+       struct buttons_dev *bdev;
+       struct input_polled_dev *poll_dev;
+       struct input_dev *input;
+       int error, i;
+
+       bdev = kzalloc(sizeof(struct buttons_dev), GFP_KERNEL);
+       poll_dev = input_allocate_polled_device();
+       if (!bdev || !poll_dev) {
+               error = -ENOMEM;
+               goto err_free_mem;
+       }
+
+       memcpy(bdev->keymap, sgio2_map, sizeof(bdev->keymap));
+
+       poll_dev->private = bdev;
+       poll_dev->poll = handle_buttons;
+       poll_dev->poll_interval = BUTTONS_POLL_INTERVAL;
+
+       input = poll_dev->input;
+       input->name = "SGI O2 buttons";
+       input->phys = "sgio2/input0";
+       input->id.bustype = BUS_HOST;
+       input->dev.parent = &pdev->dev;
+
+       input->keycode = bdev->keymap;
+       input->keycodemax = ARRAY_SIZE(bdev->keymap);
+       input->keycodesize = sizeof(unsigned short);
+
+       input_set_capability(input, EV_MSC, MSC_SCAN);
+       __set_bit(EV_KEY, input->evbit);
+       for (i = 0; i < ARRAY_SIZE(sgio2_map); i++)
+               __set_bit(bdev->keymap[i], input->keybit);
+       __clear_bit(KEY_RESERVED, input->keybit);
+
+       bdev->poll_dev = poll_dev;
+       dev_set_drvdata(&pdev->dev, bdev);
+
+       error = input_register_polled_device(poll_dev);
+       if (!error)
+               return 0;
+
+ err_free_mem:
+       input_free_polled_device(poll_dev);
+       kfree(bdev);
+       dev_set_drvdata(&pdev->dev, NULL);
+       return error;
+}
+
+static int __devexit sgio2_buttons_remove(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct buttons_dev *bdev = dev_get_drvdata(dev);
+
+       input_unregister_polled_device(bdev->poll_dev);
+       input_free_polled_device(bdev->poll_dev);
+       kfree(bdev);
+       dev_set_drvdata(dev, NULL);
+
+       return 0;
+}
+
+static struct platform_driver sgio2_buttons_driver = {
+       .probe  = sgio2_buttons_probe,
+       .remove = __devexit_p(sgio2_buttons_remove),
+       .driver = {
+               .name   = "sgio2btns",
+               .owner  = THIS_MODULE,
+       },
+};
+
+static int __init sgio2_buttons_init(void)
+{
+       return platform_driver_register(&sgio2_buttons_driver);
+}
+
+static void __exit sgio2_buttons_exit(void)
+{
+       platform_driver_unregister(&sgio2_buttons_driver);
+}
+
+module_init(sgio2_buttons_init);
+module_exit(sgio2_buttons_exit);
diff --git a/include/sound/ad1843.h b/include/sound/ad1843.h
new file mode 100644
index 0000000..b236a9d
--- /dev/null
+++ b/include/sound/ad1843.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@franken.de>
+ */
+
+#ifndef __SOUND_AD1843_H
+#define __SOUND_AD1843_H
+
+struct snd_ad1843 {
+       void *chip;
+       int (*read)(void *chip, int reg);
+       int (*write)(void *chip, int reg, int val);
+};
+
+#define AD1843_GAIN_RECLEV 0
+#define AD1843_GAIN_LINE   1
+#define AD1843_GAIN_LINE_2 2
+#define AD1843_GAIN_MIC    3
+#define AD1843_GAIN_PCM_0  4
+#define AD1843_GAIN_PCM_1  5
+#define AD1843_GAIN_SIZE   (AD1843_GAIN_PCM_1+1)
+
+int ad1843_get_gain_max(struct snd_ad1843 *ad1843, int id);
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id);
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval);
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843);
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc);
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+                     unsigned int id,
+                     unsigned int framerate,
+                     snd_pcm_format_t fmt,
+                     unsigned int channels);
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843,
+                        unsigned int id);
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+                     unsigned int framerate,
+                     snd_pcm_format_t fmt,
+                     unsigned int channels);
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843);
+int ad1843_init(struct snd_ad1843 *ad1843);
+
+#endif /* __SOUND_AD1843_H */
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig
index 531f8ba..a3e202e 100644
--- a/sound/mips/Kconfig
+++ b/sound/mips/Kconfig
@@ -11,5 +11,11 @@ config SND_AU1X00
        help
          ALSA Sound driver for the Au1x00's AC97 port.
 
+config SND_SGI_O2
+       tristate "SGI O2 Audio"
+       depends on  SND && SGI_IP32
+        help
+                Sound support for the SGI O2 Workstation. 
+
 endmenu
 
diff --git a/sound/mips/Makefile b/sound/mips/Makefile
index 47afed9..55624d8 100644
--- a/sound/mips/Makefile
+++ b/sound/mips/Makefile
@@ -2,7 +2,9 @@
 # Makefile for ALSA
 #
 
+snd-sgi-o2-objs := sgio2audio.o ad1843.o
 snd-au1x00-objs := au1x00.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o
+obj-$(CONFIG_SND_SGI_O2) += snd-sgi-o2.o
diff --git a/sound/mips/ad1843.c b/sound/mips/ad1843.c
new file mode 100644
index 0000000..76bdf68
--- /dev/null
+++ b/sound/mips/ad1843.c
@@ -0,0 +1,539 @@
+/*
+ *   AD1843 low level driver
+ *
+ *   Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ *   Copyright 2008 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+ *
+ *   inspired from vwsnd.c (SGI VW audio driver)
+ *     Copyright 1999 Silicon Graphics, Inc.  All rights reserved.
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ad1843.h>
+
+/*
+ * AD1843 bitfield definitions.  All are named as in the AD1843 data
+ * sheet, with ad1843_ prepended and individual bit numbers removed.
+ *
+ * E.g., bits LSS0 through LSS2 become ad1843_LSS.
+ *
+ * Only the bitfields we need are defined.
+ */
+
+struct ad1843_bitfield {
+       char reg;
+       char lo_bit;
+       char nbits;
+};
+
+static const struct ad1843_bitfield
+       ad1843_PDNO   = {  0, 14,  1 }, /* Converter Power-Down Flag */
+       ad1843_INIT   = {  0, 15,  1 }, /* Clock Initialization Flag */
+       ad1843_RIG    = {  2,  0,  4 }, /* Right ADC Input Gain */
+       ad1843_RMGE   = {  2,  4,  1 }, /* Right ADC Mic Gain Enable */
+       ad1843_RSS    = {  2,  5,  3 }, /* Right ADC Source Select */
+       ad1843_LIG    = {  2,  8,  4 }, /* Left ADC Input Gain */
+       ad1843_LMGE   = {  2, 12,  1 }, /* Left ADC Mic Gain Enable */
+       ad1843_LSS    = {  2, 13,  3 }, /* Left ADC Source Select */
+       ad1843_RD2M   = {  3,  0,  5 }, /* Right DAC 2 Mix Gain/Atten */
+       ad1843_RD2MM  = {  3,  7,  1 }, /* Right DAC 2 Mix Mute */
+       ad1843_LD2M   = {  3,  8,  5 }, /* Left DAC 2 Mix Gain/Atten */
+       ad1843_LD2MM  = {  3, 15,  1 }, /* Left DAC 2 Mix Mute */
+       ad1843_RX1M   = {  4,  0,  5 }, /* Right Aux 1 Mix Gain/Atten */
+       ad1843_RX1MM  = {  4,  7,  1 }, /* Right Aux 1 Mix Mute */
+       ad1843_LX1M   = {  4,  8,  5 }, /* Left Aux 1 Mix Gain/Atten */
+       ad1843_LX1MM  = {  4, 15,  1 }, /* Left Aux 1 Mix Mute */
+       ad1843_RX2M   = {  5,  0,  5 }, /* Right Aux 2 Mix Gain/Atten */
+       ad1843_RX2MM  = {  5,  7,  1 }, /* Right Aux 2 Mix Mute */
+       ad1843_LX2M   = {  5,  8,  5 }, /* Left Aux 2 Mix Gain/Atten */
+       ad1843_LX2MM  = {  5, 15,  1 }, /* Left Aux 2 Mix Mute */
+       ad1843_RMCM   = {  7,  0,  5 }, /* Right Mic Mix Gain/Atten */
+       ad1843_RMCMM  = {  7,  7,  1 }, /* Right Mic Mix Mute */
+       ad1843_LMCM   = {  7,  8,  5 }, /* Left Mic Mix Gain/Atten */
+       ad1843_LMCMM  = {  7, 15,  1 }, /* Left Mic Mix Mute */
+       ad1843_HPOS   = {  8,  4,  1 }, /* Headphone Output Voltage Swing */
+       ad1843_HPOM   = {  8,  5,  1 }, /* Headphone Output Mute */
+       ad1843_MPOM   = {  8,  6,  1 }, /* Mono Output Mute */
+       ad1843_RDA1G  = {  9,  0,  6 }, /* Right DAC1 Analog/Digital Gain */
+       ad1843_RDA1GM = {  9,  7,  1 }, /* Right DAC1 Analog Mute */
+       ad1843_LDA1G  = {  9,  8,  6 }, /* Left DAC1 Analog/Digital Gain */
+       ad1843_LDA1GM = {  9, 15,  1 }, /* Left DAC1 Analog Mute */
+       ad1843_RDA2G  = { 10,  0,  6 }, /* Right DAC2 Analog/Digital Gain */
+       ad1843_RDA2GM = { 10,  7,  1 }, /* Right DAC2 Analog Mute */
+       ad1843_LDA2G  = { 10,  8,  6 }, /* Left DAC2 Analog/Digital Gain */
+       ad1843_LDA2GM = { 10, 15,  1 }, /* Left DAC2 Analog Mute */
+       ad1843_RDA1AM = { 11,  7,  1 }, /* Right DAC1 Digital Mute */
+       ad1843_LDA1AM = { 11, 15,  1 }, /* Left DAC1 Digital Mute */
+       ad1843_RDA2AM = { 12,  7,  1 }, /* Right DAC2 Digital Mute */
+       ad1843_LDA2AM = { 12, 15,  1 }, /* Left DAC2 Digital Mute */
+       ad1843_ADLC   = { 15,  0,  2 }, /* ADC Left Sample Rate Source */
+       ad1843_ADRC   = { 15,  2,  2 }, /* ADC Right Sample Rate Source */
+       ad1843_DA1C   = { 15,  8,  2 }, /* DAC1 Sample Rate Source */
+       ad1843_DA2C   = { 15, 10,  2 }, /* DAC2 Sample Rate Source */
+       ad1843_C1C    = { 17,  0, 16 }, /* Clock 1 Sample Rate Select */
+       ad1843_C2C    = { 20,  0, 16 }, /* Clock 2 Sample Rate Select */
+       ad1843_C3C    = { 23,  0, 16 }, /* Clock 3 Sample Rate Select */
+       ad1843_DAADL  = { 25,  4,  2 }, /* Digital ADC Left Source Select */
+       ad1843_DAADR  = { 25,  6,  2 }, /* Digital ADC Right Source Select */
+       ad1843_DAMIX  = { 25, 14,  1 }, /* DAC Digital Mix Enable */
+       ad1843_DRSFLT = { 25, 15,  1 }, /* Digital Reampler Filter Mode */
+       ad1843_ADLF   = { 26,  0,  2 }, /* ADC Left Channel Data Format */
+       ad1843_ADRF   = { 26,  2,  2 }, /* ADC Right Channel Data Format */
+       ad1843_ADTLK  = { 26,  4,  1 }, /* ADC Transmit Lock Mode Select */
+       ad1843_SCF    = { 26,  7,  1 }, /* SCLK Frequency Select */
+       ad1843_DA1F   = { 26,  8,  2 }, /* DAC1 Data Format Select */
+       ad1843_DA2F   = { 26, 10,  2 }, /* DAC2 Data Format Select */
+       ad1843_DA1SM  = { 26, 14,  1 }, /* DAC1 Stereo/Mono Mode Select */
+       ad1843_DA2SM  = { 26, 15,  1 }, /* DAC2 Stereo/Mono Mode Select */
+       ad1843_ADLEN  = { 27,  0,  1 }, /* ADC Left Channel Enable */
+       ad1843_ADREN  = { 27,  1,  1 }, /* ADC Right Channel Enable */
+       ad1843_AAMEN  = { 27,  4,  1 }, /* Analog to Analog Mix Enable */
+       ad1843_ANAEN  = { 27,  7,  1 }, /* Analog Channel Enable */
+       ad1843_DA1EN  = { 27,  8,  1 }, /* DAC1 Enable */
+       ad1843_DA2EN  = { 27,  9,  1 }, /* DAC2 Enable */
+       ad1843_DDMEN  = { 27, 12,  1 }, /* DAC2 to DAC1 Mix  Enable */
+       ad1843_C1EN   = { 28, 11,  1 }, /* Clock Generator 1 Enable */
+       ad1843_C2EN   = { 28, 12,  1 }, /* Clock Generator 2 Enable */
+       ad1843_C3EN   = { 28, 13,  1 }, /* Clock Generator 3 Enable */
+       ad1843_PDNI   = { 28, 15,  1 }; /* Converter Power Down */
+
+/*
+ * The various registers of the AD1843 use three different formats for
+ * specifying gain.  The ad1843_gain structure parameterizes the
+ * formats.
+ */
+
+struct ad1843_gain {
+       int     negative;               /* nonzero if gain is negative. */
+       const struct ad1843_bitfield *lfield;
+       const struct ad1843_bitfield *rfield;
+       const struct ad1843_bitfield *lmute;
+       const struct ad1843_bitfield *rmute;
+};
+
+const struct ad1843_gain ad1843_gain_RECLEV = {
+       0, &ad1843_LIG,   &ad1843_RIG
+};
+const struct ad1843_gain ad1843_gain_LINE = {
+       1, &ad1843_LX1M,  &ad1843_RX1M,  &ad1843_LX1MM, &ad1843_RX1MM
+};
+const struct ad1843_gain ad1843_gain_LINE_2 = {
+       1, &ad1843_LDA2G, &ad1843_RDA2G, &ad1843_LDA2GM, &ad1843_RDA2GM
+};
+const struct ad1843_gain ad1843_gain_MIC = {
+       1, &ad1843_LMCM,  &ad1843_RMCM,  &ad1843_LMCMM,  &ad1843_RMCMM
+};
+const struct ad1843_gain ad1843_gain_PCM_0 = {
+       1, &ad1843_LDA1G, &ad1843_RDA1G, &ad1843_LDA1GM, &ad1843_RDA1GM
+};
+const struct ad1843_gain ad1843_gain_PCM_1 = {
+       1, &ad1843_LD2M,  &ad1843_RD2M,  &ad1843_LD2MM,  &ad1843_RD2MM
+};
+
+const struct ad1843_gain *ad1843_gain[AD1843_GAIN_SIZE] =
+{
+       &ad1843_gain_RECLEV,
+       &ad1843_gain_LINE,
+       &ad1843_gain_LINE_2,
+       &ad1843_gain_MIC,
+       &ad1843_gain_PCM_0,
+       &ad1843_gain_PCM_1,
+};
+
+/* read the current value of an AD1843 bitfield. */
+
+static int ad1843_read_bits(struct snd_ad1843 *ad1843,
+                           const struct ad1843_bitfield *field)
+{
+       int w;
+
+       w = ad1843->read(ad1843->chip, field->reg);
+       return w >> field->lo_bit & ((1 << field->nbits) - 1);
+}
+
+/*
+ * write a new value to an AD1843 bitfield and return the old value.
+ */
+
+static int ad1843_write_bits(struct snd_ad1843 *ad1843,
+                            const struct ad1843_bitfield *field,
+                            int newval)
+{
+       int w, mask, oldval, newbits;
+
+       w = ad1843->read(ad1843->chip, field->reg);
+       mask = ((1 << field->nbits) - 1) << field->lo_bit;
+       oldval = (w & mask) >> field->lo_bit;
+       newbits = (newval << field->lo_bit) & mask;
+       w = (w & ~mask) | newbits;
+       ad1843->write(ad1843->chip, field->reg, w);
+
+       return oldval;
+}
+
+/*
+ * ad1843_read_multi reads multiple bitfields from the same AD1843
+ * register.  It uses a single read cycle to do it.  (Reading the
+ * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20
+ * microseconds.)
+ *
+ * Called like this.
+ *
+ *  ad1843_read_multi(ad1843, nfields,
+ *                   &ad1843_FIELD1, &val1,
+ *                   &ad1843_FIELD2, &val2, ...);
+ */
+
+static void ad1843_read_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+       va_list ap;
+       const struct ad1843_bitfield *fp;
+       int w = 0, mask, *value, reg = -1;
+
+       va_start(ap, argcount);
+       while (--argcount >= 0) {
+               fp = va_arg(ap, const struct ad1843_bitfield *);
+               value = va_arg(ap, int *);
+               if (reg == -1) {
+                       reg = fp->reg;
+                       w = ad1843->read(ad1843->chip, reg);
+               }
+
+               mask = (1 << fp->nbits) - 1;
+               *value = w >> fp->lo_bit & mask;
+       }
+       va_end(ap);
+}
+
+/*
+ * ad1843_write_multi stores multiple bitfields into the same AD1843
+ * register.  It uses one read and one write cycle to do it.
+ *
+ * Called like this.
+ *
+ *  ad1843_write_multi(ad1843, nfields,
+ *                    &ad1843_FIELD1, val1,
+ *                    &ad1843_FIELF2, val2, ...);
+ */
+
+static void ad1843_write_multi(struct snd_ad1843 *ad1843, int argcount, ...)
+{
+       va_list ap;
+       int reg;
+       const struct ad1843_bitfield *fp;
+       int value;
+       int w, m, mask, bits;
+
+       mask = 0;
+       bits = 0;
+       reg = -1;
+
+       va_start(ap, argcount);
+       while (--argcount >= 0) {
+               fp = va_arg(ap, const struct ad1843_bitfield *);
+               value = va_arg(ap, int);
+               if (reg == -1)
+                       reg = fp->reg;
+               else
+                       BUG_ON(reg != fp->reg);
+               m = ((1 << fp->nbits) - 1) << fp->lo_bit;
+               mask |= m;
+               bits |= (value << fp->lo_bit) & m;
+       }
+       va_end(ap);
+
+       if (~mask & 0xFFFF)
+               w = ad1843->read(ad1843->chip, reg);
+       else
+               w = 0;
+       w = (w & ~mask) | bits;
+       ad1843->write(ad1843->chip, reg, w);
+}
+
+int ad1843_get_gain_max(struct snd_ad1843 *ad1843, int id)
+{
+       const struct ad1843_gain *gp = ad1843_gain[id];
+       int ret;
+
+       ret = (1 << gp->lfield->nbits);
+       if (!gp->lmute)
+               ret -= 1;
+       return ret;
+}
+
+/*
+ * ad1843_get_gain reads the specified register and extracts the gain value
+ * using the supplied gain type.
+ */
+
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id)
+{
+       int lg, rg, lm, rm;
+       const struct ad1843_gain *gp = ad1843_gain[id];
+       unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+       ad1843_read_multi(ad1843, 2, gp->lfield, &lg, gp->rfield, &rg);
+       if (gp->negative) {
+               lg = mask - lg;
+               rg = mask - rg;
+       }
+       if (gp->lmute) {
+               ad1843_read_multi(ad1843, 2, gp->lmute, &lm, gp->rmute, &rm);
+               if (lm)
+                       lg = 0;
+               if (rm)
+                       rg = 0;
+       }
+       return lg << 0 | rg << 8;
+}
+
+/*
+ * Set an audio channel's gain.
+ *
+ * Returns the new gain, which may be lower than the old gain.
+ */
+
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval)
+{
+       const struct ad1843_gain *gp = ad1843_gain[id];
+       unsigned short mask = (1 << gp->lfield->nbits) - 1;
+
+       int lg = (newval >> 0) & mask;
+       int rg = (newval >> 8) & mask;
+       int lm = (lg == 0) ? 1 : 0;
+       int rm = (rg == 0) ? 1 : 0;
+
+       if (gp->negative) {
+               lg = mask - lg;
+               rg = mask - rg;
+       }
+       if (gp->lmute)
+               ad1843_write_multi(ad1843, 2, gp->lmute, lm, gp->rmute, rm);
+       ad1843_write_multi(ad1843, 2, gp->lfield, lg, gp->rfield, rg);
+       return ad1843_get_gain(ad1843, id);
+}
+
+/* Returns the current recording source */
+
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843)
+{
+       int val = ad1843_read_bits(ad1843, &ad1843_LSS);
+
+       if (val < 0 || val > 2) {
+               val = 2;
+               ad1843_write_multi(ad1843, 2,
+                                  &ad1843_LSS, val, &ad1843_RSS, val);
+       }
+       return val;
+}
+
+/*
+ * Set recording source.
+ *
+ * Returns newsrc on success, -errno on failure.
+ */
+
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc)
+{
+       if (newsrc < 0 || newsrc > 2)
+               return -EINVAL;
+
+       ad1843_write_multi(ad1843, 2, &ad1843_LSS, newsrc, &ad1843_RSS, newsrc);
+       return newsrc;
+}
+
+/* Setup ad1843 for D/A conversion. */
+
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+                     unsigned int id,
+                     unsigned int framerate,
+                     snd_pcm_format_t fmt,
+                     unsigned int channels)
+{
+       int ad_fmt = 0, ad_mode = 0;
+
+       switch (fmt) {
+       case SNDRV_PCM_FORMAT_S8:
+               ad_fmt = 0;
+               break;
+       case SNDRV_PCM_FORMAT_U8:
+               ad_fmt = 0;
+               break;
+       case SNDRV_PCM_FORMAT_S16_LE:
+               ad_fmt = 1;
+               break;
+       case SNDRV_PCM_FORMAT_MU_LAW:
+               ad_fmt = 2;
+               break;
+       case SNDRV_PCM_FORMAT_A_LAW:
+               ad_fmt = 3;
+               break;
+       default:
+               break;
+       }
+
+       switch (channels) {
+       case 2:
+               ad_mode = 0;
+               break;
+       case 1:
+               ad_mode = 1;
+               break;
+       default:
+               break;
+       }
+
+       if (id) {
+               ad1843_write_bits(ad1843, &ad1843_C2C, framerate);
+               ad1843_write_multi(ad1843, 2,
+                                  &ad1843_DA2SM, ad_mode,
+                                  &ad1843_DA2F, ad_fmt);
+       } else {
+               ad1843_write_bits(ad1843, &ad1843_C1C, framerate);
+               ad1843_write_multi(ad1843, 2,
+                                  &ad1843_DA1SM, ad_mode,
+                                  &ad1843_DA1F, ad_fmt);
+       }
+}
+
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843, unsigned int id)
+{
+       if (id)
+               ad1843_write_bits(ad1843, &ad1843_DA2F, 1);
+       else
+               ad1843_write_bits(ad1843, &ad1843_DA1F, 1);
+}
+
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+                     unsigned int framerate,
+                     snd_pcm_format_t fmt,
+                     unsigned int channels)
+{
+       int da_fmt = 0;
+
+       switch (fmt) {
+       case SNDRV_PCM_FORMAT_S8:       da_fmt = 0; break;
+       case SNDRV_PCM_FORMAT_U8:       da_fmt = 0; break;
+       case SNDRV_PCM_FORMAT_S16_LE:   da_fmt = 1; break;
+       case SNDRV_PCM_FORMAT_MU_LAW:   da_fmt = 2; break;
+       case SNDRV_PCM_FORMAT_A_LAW:    da_fmt = 3; break;
+       default:                break;
+       }
+
+       ad1843_write_bits(ad1843, &ad1843_C3C, framerate);
+       ad1843_write_multi(ad1843, 2,
+                          &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt);
+}
+
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843)
+{
+       /* nothing to do */
+}
+
+/*
+ * Fully initialize the ad1843.  As described in the AD1843 data
+ * sheet, section "START-UP SEQUENCE".  The numbered comments are
+ * subsection headings from the data sheet.  See the data sheet, pages
+ * 52-54, for more info.
+ *
+ * return 0 on success, -errno on failure.  */
+
+int ad1843_init(struct snd_ad1843 *ad1843)
+{
+       unsigned long later;
+
+       if (ad1843_read_bits(ad1843, &ad1843_INIT) != 0) {
+               printk(KERN_ERR "ad1843: AD1843 won't initialize\n");
+               return -EIO;
+       }
+
+       ad1843_write_bits(ad1843, &ad1843_SCF, 1);
+
+       /* 4. Put the conversion resources into standby. */
+       ad1843_write_bits(ad1843, &ad1843_PDNI, 0);
+       later = jiffies + HZ / 2;       /* roughly half a second */
+
+       while (ad1843_read_bits(ad1843, &ad1843_PDNO)) {
+               if (time_after(jiffies, later)) {
+                       printk(KERN_ERR
+                              "ad1843: AD1843 won't power up\n");
+                       return -EIO;
+               }
+               schedule();
+       }
+
+       /* 5. Power up the clock generators and enable clock output pins. */
+       ad1843_write_multi(ad1843, 3,
+                          &ad1843_C1EN, 1,
+                          &ad1843_C2EN, 1,
+                          &ad1843_C3EN, 1);
+
+       /* 6. Configure conversion resources while they are in standby. */
+
+       /* DAC1/2 use clock 1/2 as source, ADC uses clock 3.  Always. */
+       ad1843_write_multi(ad1843, 4,
+                          &ad1843_DA1C, 1,
+                          &ad1843_DA2C, 2,
+                          &ad1843_ADLC, 3,
+                          &ad1843_ADRC, 3);
+
+       /* 7. Enable conversion resources. */
+       ad1843_write_bits(ad1843, &ad1843_ADTLK, 1);
+       ad1843_write_multi(ad1843, 7,
+                          &ad1843_ANAEN, 1,
+                          &ad1843_AAMEN, 1,
+                          &ad1843_DA1EN, 1,
+                          &ad1843_DA2EN, 1,
+                          &ad1843_DDMEN, 1,
+                          &ad1843_ADLEN, 1,
+                          &ad1843_ADREN, 1);
+
+       /* 8. Configure conversion resources while they are enabled. */
+
+       /* set gain to 0 for all channels */
+       ad1843_set_gain(ad1843, AD1843_GAIN_RECLEV, 0);
+       ad1843_set_gain(ad1843, AD1843_GAIN_LINE, 0);
+       ad1843_set_gain(ad1843, AD1843_GAIN_LINE_2, 0);
+       ad1843_set_gain(ad1843, AD1843_GAIN_MIC, 0);
+       ad1843_set_gain(ad1843, AD1843_GAIN_PCM_0, 0);
+       ad1843_set_gain(ad1843, AD1843_GAIN_PCM_1, 0);
+
+       /* Unmute all channels. */
+       /* DAC1 */
+       ad1843_write_multi(ad1843, 2, &ad1843_LDA1GM, 0, &ad1843_RDA1GM, 0);
+       /* DAC2 */
+       ad1843_write_multi(ad1843, 2, &ad1843_LDA2GM, 0, &ad1843_RDA2GM, 0);
+
+       /* Set default recording source to Line In and set
+        * mic gain to +20 dB.
+        */
+       ad1843_set_recsrc(ad1843, 2);
+       ad1843_write_multi(ad1843, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1);
+
+       /* Set Speaker Out level to +/- 4V and unmute it. */
+       ad1843_write_multi(ad1843, 3,
+                          &ad1843_HPOS, 1,
+                          &ad1843_HPOM, 0,
+                          &ad1843_MPOM, 0);
+
+       return 0;
+}
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
new file mode 100644
index 0000000..6630af3
--- /dev/null
+++ b/sound/mips/sgio2audio.c
@@ -0,0 +1,1013 @@
+/*
+ *   Sound driver for Silicon Graphics O2 Workstations A/V board audio.
+ *
+ *   Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ *   Copyright 2008 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+ *   Mxier part taken from mace_audio.c:
+ *   Copyright 2007 Thorben Jändling <tj.trevelyan@gmail.com>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/gfp.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/ip32/ip32_ints.h>
+#include <asm/ip32/mace.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#define SNDRV_GET_ID
+#include <sound/initval.h>
+#include <sound/ad1843.h>
+
+
+MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org>");
+MODULE_DESCRIPTION("SGI O2 Audio");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Silicon Graphics, O2 Audio}}");
+
+static int index = SNDRV_DEFAULT_IDX1;  /* Index 0-MAX */
+static char *id = SNDRV_DEFAULT_STR1;   /* ID for this card */
+
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for SGI O2 soundcard.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for SGI O2 soundcard.");
+
+
+#define SGIO2AUDIO_MAX_VOLUME 31
+
+#define AUDIO_CONTROL_RESET              BIT(0) /* 1: reset audio interface */
+#define AUDIO_CONTROL_CODEC_PRESENT      BIT(1) /* 1: codec detected */
+
+#define CODEC_CONTROL_WORD_SHIFT        0
+#define CODEC_CONTROL_READ              BIT(16)
+#define CODEC_CONTROL_ADDRESS_SHIFT     17
+
+#define CHANNEL_CONTROL_RESET           BIT(10) /* 1: reset channel */
+#define CHANNEL_DMA_ENABLE              BIT(9)  /* 1: enable DMA transfer */
+#define CHANNEL_INT_THRESHOLD_DISABLED  (0 << 5) /* interrupt disabled */
+#define CHANNEL_INT_THRESHOLD_25        (1 << 5) /* int on buffer >25% full */
+#define CHANNEL_INT_THRESHOLD_50        (2 << 5) /* int on buffer >50% full */
+#define CHANNEL_INT_THRESHOLD_75        (3 << 5) /* int on buffer >75% full */
+#define CHANNEL_INT_THRESHOLD_EMPTY     (4 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_EMPTY (5 << 5) /* int on buffer !empty */
+#define CHANNEL_INT_THRESHOLD_FULL      (6 << 5) /* int on buffer empty */
+#define CHANNEL_INT_THRESHOLD_NOT_FULL  (7 << 5) /* int on buffer !empty */
+
+#define CHANNEL_RING_SHIFT              12
+#define CHANNEL_RING_SIZE               (1 << CHANNEL_RING_SHIFT)
+#define CHANNEL_RING_MASK               (CHANNEL_RING_SIZE - 1)
+
+#define CHANNEL_LEFT_SHIFT 40
+#define CHANNEL_RIGHT_SHIFT 8
+
+struct snd_sgio2audio_chan {
+       int idx;
+       struct snd_pcm_substream *substream;
+       int pos;
+       snd_pcm_uframes_t size;
+       spinlock_t lock;
+};
+
+/* definition of the chip-specific record */
+struct snd_sgio2audio {
+       struct snd_card *card;
+
+       /* codec */
+       struct snd_ad1843 ad1843;
+       spinlock_t ad1843_lock;
+
+       /* channels */
+       struct snd_sgio2audio_chan channel[3];
+
+       /* properties */
+       int volume;
+
+       /* resources */
+       void *ring_base;
+       dma_addr_t ring_base_dma;
+};
+
+/* AD1843 access */
+
+/*
+ * read_ad1843_reg returns the current contents of a 16 bit AD1843 register.
+ *
+ * Returns unsigned register value on success, -errno on failure.
+ */
+static int read_ad1843_reg(void *priv, int reg)
+{
+       struct snd_sgio2audio *chip = priv;
+       int val;
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+       writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+              CODEC_CONTROL_READ, &mace->perif.audio.codec_control);
+       wmb();
+       val = readq(&mace->perif.audio.codec_control); /* flush bus */
+       udelay(200);
+
+       val = readq(&mace->perif.audio.codec_read);
+
+       spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+       return val;
+}
+
+/*
+ * write_ad1843_reg writes the specified value to a 16 bit AD1843 register.
+ */
+static int write_ad1843_reg(void *priv, int reg, int word)
+{
+       struct snd_sgio2audio *chip = priv;
+       int val;
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->ad1843_lock, flags);
+
+       writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
+              (word << CODEC_CONTROL_WORD_SHIFT),
+              &mace->perif.audio.codec_control);
+       wmb();
+       val = readq(&mace->perif.audio.codec_control); /* flush bus */
+       udelay(200);
+
+       spin_unlock_irqrestore(&chip->ad1843_lock, flags);
+       return 0;
+}
+
+static int sgio2audio_gain_info(struct snd_kcontrol *kcontrol,
+                              struct snd_ctl_elem_info *uinfo)
+{
+       struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+
+       uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+       uinfo->count = 2;
+       uinfo->value.integer.min = 0;
+       uinfo->value.integer.max = ad1843_get_gain_max(&chip->ad1843,
+                                            (int)kcontrol->private_value);
+       return 0;
+}
+
+static int sgio2audio_gain_get(struct snd_kcontrol *kcontrol,
+                              struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+       int vol;
+
+       vol = ad1843_get_gain(&chip->ad1843, (int)kcontrol->private_value);
+
+       ucontrol->value.integer.value[0] = (vol >> 8) & 0xFF;
+       ucontrol->value.integer.value[1] = vol & 0xFF;
+
+       return 0;
+}
+
+static int sgio2audio_gain_put(struct snd_kcontrol *kcontrol,
+                       struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+       int newvol, oldvol;
+
+       oldvol = ad1843_get_gain(&chip->ad1843, kcontrol->private_value);
+       newvol = (ucontrol->value.integer.value[0] << 8) |
+               ucontrol->value.integer.value[1];
+
+       newvol = ad1843_set_gain(&chip->ad1843, kcontrol->private_value,
+               newvol);
+
+       return newvol != oldvol;
+}
+
+static int sgio2audio_source_info(struct snd_kcontrol *kcontrol,
+                              struct snd_ctl_elem_info *uinfo)
+{
+       static const char *texts[3] = {
+               "Cam Mic", "Mic", "Line"
+       };
+       uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+       uinfo->count = 1;
+       uinfo->value.enumerated.items = 3;
+       if (uinfo->value.enumerated.item >= 3)
+               uinfo->value.enumerated.item = 1;
+       strcpy(uinfo->value.enumerated.name,
+              texts[uinfo->value.enumerated.item]);
+       return 0;
+}
+
+static int sgio2audio_source_get(struct snd_kcontrol *kcontrol,
+                              struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+
+       ucontrol->value.enumerated.item[0] = ad1843_get_recsrc(&chip->ad1843);
+       return 0;
+}
+
+static int sgio2audio_source_put(struct snd_kcontrol *kcontrol,
+                       struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_sgio2audio *chip = snd_kcontrol_chip(kcontrol);
+       int newsrc, oldsrc;
+
+       oldsrc = ad1843_get_recsrc(&chip->ad1843);
+       newsrc = ad1843_set_recsrc(&chip->ad1843,
+                                  ucontrol->value.enumerated.item[0]);
+
+       return newsrc != oldsrc;
+}
+
+/* dac1/pcm0 mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_pcm0 __devinitdata = {
+       .iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name           = "PCM Playback Volume",
+       .index          = 0,
+       .access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+       .private_value  = AD1843_GAIN_PCM_0,
+       .info           = sgio2audio_gain_info,
+       .get            = sgio2audio_gain_get,
+       .put            = sgio2audio_gain_put,
+};
+
+/* dac2/pcm1 mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_pcm1 __devinitdata = {
+       .iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name           = "PCM Playback Volume",
+       .index          = 1,
+       .access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+       .private_value  = AD1843_GAIN_PCM_1,
+       .info           = sgio2audio_gain_info,
+       .get            = sgio2audio_gain_get,
+       .put            = sgio2audio_gain_put,
+};
+
+/* record level mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_reclevel __devinitdata = {
+       .iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name           = "Capture Volume",
+       .access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+       .private_value  = AD1843_GAIN_RECLEV,
+       .info           = sgio2audio_gain_info,
+       .get            = sgio2audio_gain_get,
+       .put            = sgio2audio_gain_put,
+};
+
+/* record level source control */
+static struct snd_kcontrol_new sgio2audio_ctrl_recsource __devinitdata = {
+       .iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name           = "Capture Source",
+       .access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+       .info           = sgio2audio_source_info,
+       .get            = sgio2audio_source_get,
+       .put            = sgio2audio_source_put,
+};
+
+/* line mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_line __devinitdata = {
+       .iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name           = "Line Playback Volume",
+       .index          = 0,
+       .access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+       .private_value  = AD1843_GAIN_LINE,
+       .info           = sgio2audio_gain_info,
+       .get            = sgio2audio_gain_get,
+       .put            = sgio2audio_gain_put,
+};
+
+/* cd mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_cd __devinitdata = {
+       .iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name           = "Line Playback Volume",
+       .index          = 1,
+       .access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+       .private_value  = AD1843_GAIN_LINE_2,
+       .info           = sgio2audio_gain_info,
+       .get            = sgio2audio_gain_get,
+       .put            = sgio2audio_gain_put,
+};
+
+/* mic mixer control */
+static struct snd_kcontrol_new sgio2audio_ctrl_mic __devinitdata = {
+       .iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name           = "Mic Playback Volume",
+       .access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+       .private_value  = AD1843_GAIN_MIC,
+       .info           = sgio2audio_gain_info,
+       .get            = sgio2audio_gain_get,
+       .put            = sgio2audio_gain_put,
+};
+
+
+static int __devinit snd_sgio2audio_new_mixer(struct snd_sgio2audio *chip)
+{
+       int err;
+
+       err = snd_ctl_add(chip->card,
+                         snd_ctl_new1(&sgio2audio_ctrl_pcm0, chip));
+       if (err < 0)
+               return err;
+
+       err = snd_ctl_add(chip->card,
+                         snd_ctl_new1(&sgio2audio_ctrl_pcm1, chip));
+       if (err < 0)
+               return err;
+
+       err = snd_ctl_add(chip->card,
+                         snd_ctl_new1(&sgio2audio_ctrl_reclevel, chip));
+       if (err < 0)
+               return err;
+
+       err = snd_ctl_add(chip->card,
+                         snd_ctl_new1(&sgio2audio_ctrl_recsource, chip));
+       if (err < 0)
+               return err;
+       err = snd_ctl_add(chip->card,
+                         snd_ctl_new1(&sgio2audio_ctrl_line, chip));
+       if (err < 0)
+               return err;
+
+       err = snd_ctl_add(chip->card,
+                         snd_ctl_new1(&sgio2audio_ctrl_cd, chip));
+       if (err < 0)
+               return err;
+
+       err = snd_ctl_add(chip->card,
+                         snd_ctl_new1(&sgio2audio_ctrl_mic, chip));
+       if (err < 0)
+               return err;
+
+       return 0;
+}
+
+/* low-level audio interface DMA */
+
+/* get data out of bounce buffer, count must be a multiple of 32 */
+/* returns 1 if a period has elapsed */
+static int snd_sgio2audio_dma_pull_frag(struct snd_sgio2audio *chip,
+                                       unsigned int ch, unsigned int count)
+{
+       int ret;
+       unsigned long src_base, src_pos, dst_mask;
+       unsigned char *dst_base;
+       int dst_pos;
+       u64 *src;
+       s16 *dst;
+       u64 x;
+       unsigned long flags;
+       struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
+
+       spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+       src_base = (unsigned long) chip->ring_base | (ch << CHANNEL_RING_SHIFT);
+       src_pos = readq(&mace->perif.audio.chan[ch].read_ptr);
+       dst_base = runtime->dma_area;
+       dst_pos = chip->channel[ch].pos;
+       dst_mask = frames_to_bytes(runtime, runtime->buffer_size) - 1;
+
+       /* check if a period has elapsed */
+       chip->channel[ch].size += (count >> 3); /* in frames */
+       ret = chip->channel[ch].size >= runtime->period_size;
+       chip->channel[ch].size %= runtime->period_size;
+
+       while (count) {
+               src = (u64 *)(src_base + src_pos);
+               dst = (s16 *)(dst_base + dst_pos);
+
+               x = *src;
+               dst[0] = (x >> CHANNEL_LEFT_SHIFT) & 0xffff;
+               dst[1] = (x >> CHANNEL_RIGHT_SHIFT) & 0xffff;
+
+               src_pos = (src_pos + sizeof(u64)) & CHANNEL_RING_MASK;
+               dst_pos = (dst_pos + 2 * sizeof(s16)) & dst_mask;
+               count -= sizeof(u64);
+       }
+
+       writeq(src_pos, &mace->perif.audio.chan[ch].read_ptr); /* in bytes */
+       chip->channel[ch].pos = dst_pos;
+
+       spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+       return ret;
+}
+
+/* put some DMA data in bounce buffer, count must be a multiple of 32 */
+/* returns 1 if a period has elapsed */
+static int snd_sgio2audio_dma_push_frag(struct snd_sgio2audio *chip,
+                                       unsigned int ch, unsigned int count)
+{
+       int ret;
+       s64 l, r;
+       unsigned long dst_base, dst_pos, src_mask;
+       unsigned char *src_base;
+       int src_pos;
+       u64 *dst;
+       s16 *src;
+       unsigned long flags;
+       struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
+
+       spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+       dst_base = (unsigned long)chip->ring_base | (ch << CHANNEL_RING_SHIFT);
+       dst_pos = readq(&mace->perif.audio.chan[ch].write_ptr);
+       src_base = runtime->dma_area;
+       src_pos = chip->channel[ch].pos;
+       src_mask = frames_to_bytes(runtime, runtime->buffer_size) - 1;
+
+       /* check if a period has elapsed */
+       chip->channel[ch].size += (count >> 3); /* in frames */
+       ret = chip->channel[ch].size >= runtime->period_size;
+       chip->channel[ch].size %= runtime->period_size;
+
+       while (count) {
+               src = (s16 *)(src_base + src_pos);
+               dst = (u64 *)(dst_base + dst_pos);
+
+               l = src[0]; /* sign extend */
+               r = src[1]; /* sign extend */
+
+               *dst = ((l & 0x00ffffff) << CHANNEL_LEFT_SHIFT) |
+                       ((r & 0x00ffffff) << CHANNEL_RIGHT_SHIFT);
+
+               dst_pos = (dst_pos + sizeof(u64)) & CHANNEL_RING_MASK;
+               src_pos = (src_pos + 2 * sizeof(s16)) & src_mask;
+               count -= sizeof(u64);
+       }
+
+       writeq(dst_pos, &mace->perif.audio.chan[ch].write_ptr); /* in bytes */
+       chip->channel[ch].pos = src_pos;
+
+       spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+       return ret;
+}
+
+static int snd_sgio2audio_dma_start(struct snd_pcm_substream *substream)
+{
+       struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+       struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+       int ch = chan->idx;
+
+       /* reset DMA channel */
+       writeq(CHANNEL_CONTROL_RESET, &mace->perif.audio.chan[ch].control);
+       udelay(10);
+       writeq(0, &mace->perif.audio.chan[ch].control);
+
+       if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+               /* push a full buffer */
+               snd_sgio2audio_dma_push_frag(chip, ch, CHANNEL_RING_SIZE - 32);
+       }
+       /* set DMA to wake on 50% empty and enable interrupt */
+       writeq(CHANNEL_DMA_ENABLE | CHANNEL_INT_THRESHOLD_50,
+              &mace->perif.audio.chan[ch].control);
+       return 0;
+}
+
+static int snd_sgio2audio_dma_stop(struct snd_pcm_substream *substream)
+{
+       struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+       writeq(0, &mace->perif.audio.chan[chan->idx].control);
+       return 0;
+}
+
+static irqreturn_t snd_sgio2audio_dma_in_isr(int irq, void *dev_id)
+{
+       struct snd_sgio2audio_chan *chan = dev_id;
+       struct snd_pcm_substream *substream;
+       struct snd_sgio2audio *chip;
+       int count, ch;
+
+       substream = chan->substream;
+       chip = snd_pcm_substream_chip(substream);
+       ch = chan->idx;
+
+       /* empty the ring */
+       count = CHANNEL_RING_SIZE -
+               readq(&mace->perif.audio.chan[ch].depth) - 32;
+       if (snd_sgio2audio_dma_pull_frag(chip, ch, count))
+               snd_pcm_period_elapsed(substream);
+
+       return IRQ_HANDLED;
+}
+
+static irqreturn_t snd_sgio2audio_dma_out_isr(int irq, void *dev_id)
+{
+       struct snd_sgio2audio_chan *chan = dev_id;
+       struct snd_pcm_substream *substream;
+       struct snd_sgio2audio *chip;
+       int count, ch;
+
+       substream = chan->substream;
+       chip = snd_pcm_substream_chip(substream);
+       ch = chan->idx;
+       /* fill the ring */
+       count = CHANNEL_RING_SIZE -
+               readq(&mace->perif.audio.chan[ch].depth) - 32;
+       if (snd_sgio2audio_dma_push_frag(chip, ch, count))
+               snd_pcm_period_elapsed(substream);
+
+       return IRQ_HANDLED;
+}
+
+static irqreturn_t snd_sgio2audio_error_isr(int irq, void *dev_id)
+{
+       struct snd_sgio2audio_chan *chan = dev_id;
+       struct snd_pcm_substream *substream;
+
+       substream = chan->substream;
+       snd_sgio2audio_dma_stop(substream);
+       snd_sgio2audio_dma_start(substream);
+       return IRQ_HANDLED;
+}
+
+/* PCM part */
+/* PCM hardware definition */
+static struct snd_pcm_hardware snd_sgio2audio_pcm_hw = {
+       .info = (SNDRV_PCM_INFO_MMAP |
+                SNDRV_PCM_INFO_MMAP_VALID |
+                SNDRV_PCM_INFO_INTERLEAVED |
+                SNDRV_PCM_INFO_BLOCK_TRANSFER),
+       .formats =          SNDRV_PCM_FMTBIT_S16_BE,
+       .rates =            SNDRV_PCM_RATE_8000_48000,
+       .rate_min =         8000,
+       .rate_max =         48000,
+       .channels_min =     2,
+       .channels_max =     2,
+       .buffer_bytes_max = 65536,
+       .period_bytes_min = 32768,
+       .period_bytes_max = 65536,
+       .periods_min =      1,
+       .periods_max =      1024,
+};
+
+/* PCM playback open callback */
+static int snd_sgio2audio_playback1_open(struct snd_pcm_substream *substream)
+{
+       struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+       struct snd_pcm_runtime *runtime = substream->runtime;
+
+       runtime->hw = snd_sgio2audio_pcm_hw;
+       runtime->private_data = &chip->channel[1];
+       return 0;
+}
+
+static int snd_sgio2audio_playback2_open(struct snd_pcm_substream *substream)
+{
+       struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+       struct snd_pcm_runtime *runtime = substream->runtime;
+
+       runtime->hw = snd_sgio2audio_pcm_hw;
+       runtime->private_data = &chip->channel[2];
+       return 0;
+}
+
+/* PCM capture open callback */
+static int snd_sgio2audio_capture_open(struct snd_pcm_substream *substream)
+{
+       struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+       struct snd_pcm_runtime *runtime = substream->runtime;
+
+       runtime->hw = snd_sgio2audio_pcm_hw;
+       runtime->private_data = &chip->channel[0];
+       return 0;
+}
+
+/* PCM close callback */
+static int snd_sgio2audio_pcm_close(struct snd_pcm_substream *substream)
+{
+       struct snd_pcm_runtime *runtime = substream->runtime;
+
+       runtime->private_data = NULL;
+       return 0;
+}
+
+
+/* hw_params callback */
+static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream,
+                                       struct snd_pcm_hw_params *hw_params)
+{
+       struct snd_pcm_runtime *runtime = substream->runtime;
+       int size = params_buffer_bytes(hw_params);
+
+       /* alloc virtual 'dma' area */
+       if (runtime->dma_area)
+               vfree(runtime->dma_area);
+       runtime->dma_area = vmalloc(size);
+       if (runtime->dma_area == NULL)
+               return -ENOMEM;
+       runtime->dma_bytes = size;
+       return 0;
+}
+
+/* hw_free callback */
+static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+       if (substream->runtime->dma_area)
+               vfree(substream->runtime->dma_area);
+       substream->runtime->dma_area = NULL;
+       return 0;
+}
+
+/* prepare callback */
+static int snd_sgio2audio_pcm_prepare(struct snd_pcm_substream *substream)
+{
+       struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+       struct snd_pcm_runtime *runtime = substream->runtime;
+       struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+       int ch = chan->idx;
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->channel[ch].lock, flags);
+
+       /* Setup the pseudo-dma transfer pointers.  */
+       chip->channel[ch].pos = 0;
+       chip->channel[ch].size = 0;
+       chip->channel[ch].substream = substream;
+
+       /* set AD1843 format */
+       /* hardware format is always S16_LE */
+       switch (substream->stream) {
+       case SNDRV_PCM_STREAM_PLAYBACK:
+               ad1843_setup_dac(&chip->ad1843,
+                                ch - 1,
+                                runtime->rate,
+                                SNDRV_PCM_FORMAT_S16_LE,
+                                runtime->channels);
+               break;
+       case SNDRV_PCM_STREAM_CAPTURE:
+               ad1843_setup_adc(&chip->ad1843,
+                                runtime->rate,
+                                SNDRV_PCM_FORMAT_S16_LE,
+                                runtime->channels);
+               break;
+       }
+       spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
+       return 0;
+}
+
+/* trigger callback */
+static int snd_sgio2audio_pcm_trigger(struct snd_pcm_substream *substream,
+                                     int cmd)
+{
+       switch (cmd) {
+       case SNDRV_PCM_TRIGGER_START:
+               /* start the PCM engine */
+               snd_sgio2audio_dma_start(substream);
+               break;
+       case SNDRV_PCM_TRIGGER_STOP:
+               /* stop the PCM engine */
+               snd_sgio2audio_dma_stop(substream);
+               break;
+       default:
+               return -EINVAL;
+       }
+       return 0;
+}
+
+/* pointer callback */
+static snd_pcm_uframes_t
+snd_sgio2audio_pcm_pointer(struct snd_pcm_substream *substream)
+{
+       struct snd_sgio2audio *chip = snd_pcm_substream_chip(substream);
+       struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
+
+       /* get the current hardware pointer */
+       return bytes_to_frames(substream->runtime,
+                              chip->channel[chan->idx].pos);
+}
+
+/* get the physical page pointer on the given offset */
+static struct page *snd_sgio2audio_page(struct snd_pcm_substream *substream,
+                                       unsigned long offset)
+{
+       return vmalloc_to_page(substream->runtime->dma_area + offset);
+}
+
+/* operators */
+static struct snd_pcm_ops snd_sgio2audio_playback1_ops = {
+       .open =        snd_sgio2audio_playback1_open,
+       .close =       snd_sgio2audio_pcm_close,
+       .ioctl =       snd_pcm_lib_ioctl,
+       .hw_params =   snd_sgio2audio_pcm_hw_params,
+       .hw_free =     snd_sgio2audio_pcm_hw_free,
+       .prepare =     snd_sgio2audio_pcm_prepare,
+       .trigger =     snd_sgio2audio_pcm_trigger,
+       .pointer =     snd_sgio2audio_pcm_pointer,
+       .page =        snd_sgio2audio_page,
+};
+
+static struct snd_pcm_ops snd_sgio2audio_playback2_ops = {
+       .open =        snd_sgio2audio_playback2_open,
+       .close =       snd_sgio2audio_pcm_close,
+       .ioctl =       snd_pcm_lib_ioctl,
+       .hw_params =   snd_sgio2audio_pcm_hw_params,
+       .hw_free =     snd_sgio2audio_pcm_hw_free,
+       .prepare =     snd_sgio2audio_pcm_prepare,
+       .trigger =     snd_sgio2audio_pcm_trigger,
+       .pointer =     snd_sgio2audio_pcm_pointer,
+       .page =        snd_sgio2audio_page,
+};
+
+static struct snd_pcm_ops snd_sgio2audio_capture_ops = {
+       .open =        snd_sgio2audio_capture_open,
+       .close =       snd_sgio2audio_pcm_close,
+       .ioctl =       snd_pcm_lib_ioctl,
+       .hw_params =   snd_sgio2audio_pcm_hw_params,
+       .hw_free =     snd_sgio2audio_pcm_hw_free,
+       .prepare =     snd_sgio2audio_pcm_prepare,
+       .trigger =     snd_sgio2audio_pcm_trigger,
+       .pointer =     snd_sgio2audio_pcm_pointer,
+       .page =        snd_sgio2audio_page,
+};
+
+/*
+ *  definitions of capture are omitted here...
+ */
+
+/* create a pcm device */
+static int __devinit snd_sgio2audio_new_pcm(struct snd_sgio2audio *chip)
+{
+       struct snd_pcm *pcm;
+       int err;
+
+       /* create first pcm device with one outputs and one input */
+       err = snd_pcm_new(chip->card, "SGI O2 Audio", 0, 1, 1, &pcm);
+       if (err < 0)
+               return err;
+
+       pcm->private_data = chip;
+       strcpy(pcm->name, "SGI O2 DAC1");
+
+       /* set operators */
+       snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+                       &snd_sgio2audio_playback1_ops);
+       snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+                       &snd_sgio2audio_capture_ops);
+
+       /* create second  pcm device with one outputs and no input */
+       err = snd_pcm_new(chip->card, "SGI O2 Audio", 1, 1, 0, &pcm);
+       if (err < 0)
+               return err;
+
+       pcm->private_data = chip;
+       strcpy(pcm->name, "SGI O2 DAC2");
+
+       /* set operators */
+       snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+                       &snd_sgio2audio_playback2_ops);
+
+       return 0;
+}
+
+static struct {
+       int idx;
+       int irq;
+       irqreturn_t (*isr)(int, void *);
+       const char *desc;
+} snd_sgio2_isr_table[] = {
+       {
+               .idx = 0,
+               .irq = MACEISA_AUDIO1_DMAT_IRQ,
+               .isr = snd_sgio2audio_dma_in_isr,
+               .desc = "Capture DMA Channel 0"
+       }, {
+               .idx = 0,
+               .irq = MACEISA_AUDIO1_OF_IRQ,
+               .isr = snd_sgio2audio_error_isr,
+               .desc = "Capture Overflow"
+       }, {
+               .idx = 1,
+               .irq = MACEISA_AUDIO2_DMAT_IRQ,
+               .isr = snd_sgio2audio_dma_out_isr,
+               .desc = "Playback DMA Channel 1"
+       }, {
+               .idx = 1,
+               .irq = MACEISA_AUDIO2_MERR_IRQ,
+               .isr = snd_sgio2audio_error_isr,
+               .desc = "Memory Error Channel 1"
+       }, {
+               .idx = 2,
+               .irq = MACEISA_AUDIO3_DMAT_IRQ,
+               .isr = snd_sgio2audio_dma_out_isr,
+               .desc = "Playback DMA Channel 2"
+       }, {
+               .idx = 2,
+               .irq = MACEISA_AUDIO3_MERR_IRQ,
+               .isr = snd_sgio2audio_error_isr,
+               .desc = "Memory Error Channel 2"
+       }
+};
+
+/* ALSA driver */
+
+static int snd_sgio2audio_free(struct snd_sgio2audio *chip)
+{
+       int i;
+
+       /* reset interface */
+       writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+       udelay(1);
+       writeq(0, &mace->perif.audio.control);
+
+       /* release IRQ's */
+       for (i = 0; i < ARRAY_SIZE(snd_sgio2_isr_table); i++)
+               free_irq(snd_sgio2_isr_table[i].irq,
+                        &chip->channel[snd_sgio2_isr_table[i].idx]);
+
+       dma_free_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+                         chip->ring_base, chip->ring_base_dma);
+
+       /* release card data */
+       kfree(chip);
+       return 0;
+}
+
+static int snd_sgio2audio_dev_free(struct snd_device *device)
+{
+       struct snd_sgio2audio *chip = device->device_data;
+
+       return snd_sgio2audio_free(chip);
+}
+
+static struct snd_device_ops ops = {
+       .dev_free = snd_sgio2audio_dev_free,
+};
+
+static int __devinit snd_sgio2audio_create(struct snd_card *card,
+                                          struct snd_sgio2audio **rchip)
+{
+       struct snd_sgio2audio *chip;
+       int i, err;
+
+       *rchip = NULL;
+
+       /* check if a codec is attached to the interface */
+       /* (Audio or Audio/Video board present) */
+       if (!(readq(&mace->perif.audio.control) & AUDIO_CONTROL_CODEC_PRESENT))
+               return -ENOENT;
+
+       chip = kzalloc(sizeof(struct snd_sgio2audio), GFP_KERNEL);
+       if (chip == NULL)
+               return -ENOMEM;
+
+       chip->card = card;
+
+       chip->ring_base = dma_alloc_coherent(NULL, MACEISA_RINGBUFFERS_SIZE,
+                                            &chip->ring_base_dma, GFP_USER);
+       if (chip->ring_base == NULL) {
+               printk(KERN_ERR
+                      "sgio2audio: could not allocate ring buffers\n");
+               kfree(chip);
+               return -ENOMEM;
+       }
+
+       spin_lock_init(&chip->ad1843_lock);
+
+       chip->volume = SGIO2AUDIO_MAX_VOLUME;
+
+       /* initialize channels */
+       for (i = 0; i < 3; i++) {
+               spin_lock_init(&chip->channel[i].lock);
+               chip->channel[i].idx = i;
+       }
+
+       /* allocate IRQs */
+       for (i = 0; i < ARRAY_SIZE(snd_sgio2_isr_table); i++) {
+               if (request_irq(snd_sgio2_isr_table[i].irq,
+                               snd_sgio2_isr_table[i].isr,
+                               IRQF_SHARED,
+                               snd_sgio2_isr_table[i].desc,
+                               &chip->channel[snd_sgio2_isr_table[i].idx])) {
+                       snd_sgio2audio_free(chip);
+                       printk(KERN_ERR "sgio2audio: cannot allocate irq %d\n",
+                              snd_sgio2_isr_table[i].irq);
+                       return -EBUSY;
+               }
+       }
+
+       /* reset the interface */
+       writeq(AUDIO_CONTROL_RESET, &mace->perif.audio.control);
+       udelay(1);
+       writeq(0, &mace->perif.audio.control);
+       udelay(100); /* give time to recover */
+
+       /* set ring base */
+       writeq(chip->ring_base_dma, &mace->perif.ctrl.ringbase);
+
+       /* attach the AD1843 codec */
+       chip->ad1843.read = read_ad1843_reg;
+       chip->ad1843.write = write_ad1843_reg;
+       chip->ad1843.chip = chip;
+
+       /* initialize the AD1843 codec */
+       err = ad1843_init(&chip->ad1843);
+       if (err < 0) {
+               snd_sgio2audio_free(chip);
+               return err;
+       }
+
+       err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+       if (err < 0) {
+               snd_sgio2audio_free(chip);
+               return err;
+       }
+       *rchip = chip;
+       return 0;
+}
+
+static int __devinit snd_sgio2audio_probe(struct platform_device *pdev)
+{
+       struct snd_card *card;
+       struct snd_sgio2audio *chip;
+       int err;
+
+       card = snd_card_new(index, id, THIS_MODULE, 0);
+       if (card == NULL)
+               return -ENOMEM;
+
+       err = snd_sgio2audio_create(card, &chip);
+       if (err < 0) {
+               snd_card_free(card);
+               return err;
+       }
+       snd_card_set_dev(card, &pdev->dev);
+
+       err = snd_sgio2audio_new_pcm(chip);
+       if (err < 0) {
+               snd_card_free(card);
+               return err;
+       }
+       err = snd_sgio2audio_new_mixer(chip);
+       if (err < 0) {
+               snd_card_free(card);
+               return err;
+       }
+
+       strcpy(card->driver, "SGI O2 Audio");
+       strcpy(card->shortname, "SGI O2 Audio");
+       sprintf(card->longname, "%s irq %i-%i",
+               card->shortname,
+               MACEISA_AUDIO1_DMAT_IRQ,
+               MACEISA_AUDIO3_MERR_IRQ);
+
+       err = snd_card_register(card);
+       if (err < 0) {
+               snd_card_free(card);
+               return err;
+       }
+       platform_set_drvdata(pdev, card);
+       return 0;
+}
+
+static int __exit snd_sgio2audio_remove(struct platform_device *pdev)
+{
+       struct snd_card *card = platform_get_drvdata(pdev);
+
+       snd_card_free(card);
+       platform_set_drvdata(pdev, NULL);
+       return 0;
+}
+
+static struct platform_driver sgio2audio_driver = {
+       .probe  = snd_sgio2audio_probe,
+       .remove = __devexit_p(snd_sgio2audio_remove),
+       .driver = {
+               .name   = "sgio2audio",
+               .owner  = THIS_MODULE,
+       }
+};
+
+static int __init alsa_card_sgio2audio_init(void)
+{
+       return platform_driver_register(&sgio2audio_driver);
+}
+
+static void __exit alsa_card_sgio2audio_exit(void)
+{
+       platform_driver_unregister(&sgio2audio_driver);
+}
+
+module_init(alsa_card_sgio2audio_init)
+module_exit(alsa_card_sgio2audio_exit)
-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea.                                                [ RFC1925, 2.3 ]

<Prev in Thread] Current Thread [Next in Thread>