linux-mips
[Top] [All Lists]

[PATCH v2][2/2] add new Cobalt LCD platform device register

To: Andrew Morton <akpm@linux-foundation.org>, Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH v2][2/2] add new Cobalt LCD platform device register
From: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Date: Thu, 26 Jun 2008 21:52:51 +0900
Cc: yoichi_yuasa@tripeaks.co.jp, linux-fbdev-devel <linux-fbdev-devel@lists.sourceforge.net>, linux-mips <linux-mips@linux-mips.org>
In-reply-to: <20080626215018.2d946781.yoichi_yuasa@tripeaks.co.jp>
Organization: TriPeaks Corporation
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <20080626215018.2d946781.yoichi_yuasa@tripeaks.co.jp>
Sender: linux-mips-bounce@linux-mips.org
Add new Cobalt LCD platform device register.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>

diff -pruN -X /home/yuasa/Memo/dontdiff linux-orig/arch/mips/cobalt/Makefile 
linux/arch/mips/cobalt/Makefile
--- linux-orig/arch/mips/cobalt/Makefile        2008-06-01 18:01:46.808253360 
+0900
+++ linux/arch/mips/cobalt/Makefile     2008-06-01 22:55:40.342007921 +0900
@@ -2,7 +2,7 @@
 # Makefile for the Cobalt micro systems family specific parts of the kernel
 #
 
-obj-y := buttons.o irq.o led.o reset.o rtc.o serial.o setup.o time.o
+obj-y := buttons.o irq.o lcd.o led.o reset.o rtc.o serial.o setup.o time.o
 
 obj-$(CONFIG_PCI)              += pci.o
 obj-$(CONFIG_EARLY_PRINTK)     += console.o
diff -pruN -X /home/yuasa/Memo/dontdiff linux-orig/arch/mips/cobalt/lcd.c 
linux/arch/mips/cobalt/lcd.c
--- linux-orig/arch/mips/cobalt/lcd.c   1970-01-01 09:00:00.000000000 +0900
+++ linux/arch/mips/cobalt/lcd.c        2008-06-01 22:55:40.350008376 +0900
@@ -0,0 +1,55 @@
+/*
+ *  Registration of Cobalt LCD platform device.
+ *
+ *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 
USA
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+static struct resource cobalt_lcd_resource __initdata = {
+       .start  = 0x1f000000,
+       .end    = 0x1f00001f,
+       .flags  = IORESOURCE_MEM,
+};
+
+static __init int cobalt_lcd_add(void)
+{
+       struct platform_device *pdev;
+       int retval;
+
+       pdev = platform_device_alloc("cobalt-lcd", -1);
+       if (!pdev)
+               return -ENOMEM;
+
+       retval = platform_device_add_resources(pdev, &cobalt_lcd_resource, 1);
+       if (retval)
+               goto err_free_device;
+
+       retval = platform_device_add(pdev);
+       if (retval)
+               goto err_free_device;
+
+       return 0;
+
+err_free_device:
+       platform_device_put(pdev);
+
+       return retval;
+}
+device_initcall(cobalt_lcd_add);

<Prev in Thread] Current Thread [Next in Thread>