linux-mips
[Top] [All Lists]

[PATCH 3/6] RTC: SWARM I2C board initialization (#2)

To: Alessandro Zummo <a.zummo@towertech.it>, Andrew Morton <akpm@linux-foundation.org>, Atsushi Nemoto <anemo@mba.ocn.ne.jp>, David Woodhouse <dwmw2@infradead.org>, Jean Delvare <khali@linux-fr.org>, Ralf Baechle <ralf@linux-mips.org>, Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH 3/6] RTC: SWARM I2C board initialization (#2)
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Tue, 13 May 2008 04:27:10 +0100 (BST)
Cc: rtc-linux@googlegroups.com, i2c@lm-sensors.org, linux-mips@linux-mips.org, linux-kernel@vger.kernel.org
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
 The standard rtc-m41t80.c driver cannot be used with the SWARM as it is,
because the board does not provide setup information for the I2C core.  
As a result the bus and the address to probe for the M41T80 chip is not
known.

 Here is a set of changes that fix the problem:

1. swarm-i2c.c -- SWARM I2C board setup, currently for the M41T80 chip on 
   the bus #1 only (there is a MAX6654 temperature sensor on the bus #0 
   which may be added in the future if we have a driver for that chip).

2. The i2c-sibyte.c BCM1250A SMBus controller driver now registers its 
   buses as numbered so that board setup is correctly applied.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
---
 I have renamed i2c-swarm.c to swarm-i2c.c for consistency with names 
of other files under arch/mips/.

 Please note this patch trivially depends on
patch-2.6.26-rc1-20080505-swarm-core-16 -- 2/6 of this set.

  Maciej

patch-2.6.26-rc1-20080505-swarm-i2c-17
diff -up --recursive --new-file 
linux-2.6.26-rc1-20080505.macro/arch/mips/sibyte/swarm/Makefile 
linux-2.6.26-rc1-20080505/arch/mips/sibyte/swarm/Makefile
--- linux-2.6.26-rc1-20080505.macro/arch/mips/sibyte/swarm/Makefile     
2008-05-06 01:18:21.000000000 +0000
+++ linux-2.6.26-rc1-20080505/arch/mips/sibyte/swarm/Makefile   2008-05-13 
03:11:43.000000000 +0000
@@ -1,3 +1,4 @@
 obj-y                          := setup.o rtc_xicor1241.o rtc_m41t81.o
 
+obj-$(CONFIG_I2C_BOARDINFO)    += swarm-i2c.o
 obj-$(CONFIG_KGDB)             += dbg_io.o
diff -up --recursive --new-file 
linux-2.6.26-rc1-20080505.macro/arch/mips/sibyte/swarm/swarm-i2c.c 
linux-2.6.26-rc1-20080505/arch/mips/sibyte/swarm/swarm-i2c.c
--- linux-2.6.26-rc1-20080505.macro/arch/mips/sibyte/swarm/swarm-i2c.c  
1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.26-rc1-20080505/arch/mips/sibyte/swarm/swarm-i2c.c        
2008-05-13 03:11:26.000000000 +0000
@@ -0,0 +1,37 @@
+/*
+ *     arch/mips/sibyte/swarm/swarm-i2c.c
+ *
+ *     Broadcom BCM91250A (SWARM), etc. I2C platform setup.
+ *
+ *     Copyright (c) 2008  Maciej W. Rozycki
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     as published by the Free Software Foundation; either version
+ *     2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+
+static struct i2c_board_info swarm_i2c_info1[] __initdata = {
+       {
+               I2C_BOARD_INFO("m41t81", 0x68),
+       },
+};
+
+static int __init swarm_i2c_init(void)
+{
+       int err;
+
+       err = i2c_register_board_info(1, swarm_i2c_info1,
+                                     ARRAY_SIZE(swarm_i2c_info1));
+       if (err < 0)
+               printk(KERN_ERR
+                      "i2c-swarm: cannot register board I2C devices\n");
+       return err;
+}
+
+arch_initcall(swarm_i2c_init);
diff -up --recursive --new-file 
linux-2.6.26-rc1-20080505.macro/drivers/i2c/busses/i2c-sibyte.c 
linux-2.6.26-rc1-20080505/drivers/i2c/busses/i2c-sibyte.c
--- linux-2.6.26-rc1-20080505.macro/drivers/i2c/busses/i2c-sibyte.c     
2008-05-05 02:55:25.000000000 +0000
+++ linux-2.6.26-rc1-20080505/drivers/i2c/busses/i2c-sibyte.c   2008-05-11 
01:21:45.000000000 +0000
@@ -143,7 +143,7 @@ int __init i2c_sibyte_add_bus(struct i2c
        csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
        csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
 
-       return i2c_add_adapter(i2c_adap);
+       return i2c_add_numbered_adapter(i2c_adap);
 }
 
 
@@ -159,6 +159,7 @@ static struct i2c_adapter sibyte_board_a
                .class          = I2C_CLASS_HWMON,
                .algo           = NULL,
                .algo_data      = &sibyte_board_data[0],
+               .nr             = 0,
                .name           = "SiByte SMBus 0",
        },
        {
@@ -167,6 +168,7 @@ static struct i2c_adapter sibyte_board_a
                .class          = I2C_CLASS_HWMON,
                .algo           = NULL,
                .algo_data      = &sibyte_board_data[1],
+               .nr             = 1,
                .name           = "SiByte SMBus 1",
        },
 };

<Prev in Thread] Current Thread [Next in Thread>