linux-mips
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [PATCH] BCM1480: Init pci controller io_map_base

from [Maciej W. Rozycki] [Permanent Link][Original]
To: Ralf Baechle <ralf@linux-mips.org>
Subject: Re: [PATCH] BCM1480: Init pci controller io_map_base
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Wed, 19 Mar 2008 11:12:23 +0000 (GMT)
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>, linux-mips@linux-mips.org
In-reply-to: <20080310162825.GE31420@linux-mips.org>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <20080308185155.BA791E31BE@solo.franken.de> <20080310162825.GE31420@linux-mips.org>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Alpine 1.00 (SOC 882 2007-12-20) 
On Mon, 10 Mar 2008, Ralf Baechle wrote:

> Thanks, applied.  But this patch only solves the problem for the BCM1480's
> native PCI bus.  Support for PCI behind HT still needs to be fixed and I'm
> not quite sure where the ports of such devices and busses are getting
> mapped to.

 Hmm, A_BCM1480_PHYS_HT_IO_MATCH_BYTES?

  Maciej
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Serial console on Au1100, Manuel Lauss
Next by Date:  Re: [PATCH] BCM1480: Init pci controller io_map_base, Thomas Bogendoerfer
Previous by Thread:  Re: [PATCH] BCM1480: Init pci controller io_map_base, Ralf Baechle
Next by Thread:  Re: [PATCH] BCM1480: Init pci controller io_map_base, Thomas Bogendoerfer
Indexes:  [Date] [Thread] [Top] [All Lists]