linux-mips
[Top] [All Lists]

Need info in booting kernel using JTAG

To: linux-mips@linux-mips.org
Subject: Need info in booting kernel using JTAG
From: "learn linux" <learn.mips.linux@gmail.com>
Date: Thu, 6 Mar 2008 15:36:26 +0530
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type; bh=yzyTJlZxWmvXKsp4OVVyFxBrxkuWU4qbdCbKCc/k+zc=; b=Bt4o0yXo9Sh9ymJMtkj5TjbzfF7zmOEE6PVSdVQkT7AjyYO4P+WUZFYoDtseOAYj28NTcsXFEOvD4Ji2ZN/HciVGHDmsuPoMNEDUhwkptjDggvRbcNK/PzLx7k0qSEROa4IJIE9rSpsku0IRSdIEJnhVmRaTkup++cazlLtiLoU=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type; b=syeQ4YXUVKh41UH2eJxMQCd7YXhBI2m+sG8Sn+imT77JP9/ixD/3T5C8gcxVSfmIhTuSWaPXj1GI0NGJLDTG+cTmsB54Nd+fpY+EQSSzBoWeYGBE5L8CepQR1ffJbCntSGZVS221zoktsyVRI7YiBfeq4plUoVaH35ZU61lLD9E=
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Hi all,

                 I am beginner to the Linux and JTAG. I have a board using Infineon's "INCA-IP PSB 21553/PSB 21521 (which has MIPS 4kc core). I want to boot the linux kernel in JTAG mode. I am using Lauterbach Trace32 tool, which runs on a windows PC.
    I had gone through the help files provided in Trace 32 itself. It mentions about the usage of the tool. But I need information about how to make a setup in such a way that I could boot the kernel in JTAG mode. Basically I wanted to debug a kernel module.

    Please guide how to make this setup and what are the things that I should take care in achieving the same.

Thanks in advance,
Sudeep.
<Prev in Thread] Current Thread [Next in Thread>
  • Need info in booting kernel using JTAG, learn linux <=