From: Frank Rowand <frank.rowand@am.sony.com>
Add polled debug driver support to serial_txx9.c for kgdb, and initialize
the driver for the Toshiba RBTX4927.
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
---
arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c | 6 6 +
0 - 0 !
drivers/serial/serial_txx9.c | 90 90 +
0 - 0 !
2 files changed, 96 insertions(+)
Index: linux-2.6.24-rc7/drivers/serial/serial_txx9.c
===================================================================
--- linux-2.6.24-rc7.orig/drivers/serial/serial_txx9.c
+++ linux-2.6.24-rc7/drivers/serial/serial_txx9.c
@@ -1237,6 +1237,96 @@ void prom_putchar(char ch)
#endif
+/******************************************************************************/
+/* BEG: KDBG Routines
*/
+/******************************************************************************/
+
+#ifdef CONFIG_KGDB
+int kgdb_initialized;
+
+void txx9_sio_kgdb_hook(unsigned int port, unsigned int baud_rate)
+{
+ static struct resource kgdb_resource;
+ int ret;
+ struct uart_txx9_port *up = &serial_txx9_ports[port];
+
+ /* prevent initialization by driver */
+ kgdb_resource.name = "serial_txx9(debug)";
+ kgdb_resource.start = (resource_size_t)up->port.membase;
+ kgdb_resource.end = (resource_size_t)up->port.membase + 36 - 1;
+ kgdb_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+ ret = request_resource(&iomem_resource, &kgdb_resource);
+ if (ret == -EBUSY)
+ printk(KERN_ERR
+ "txx9_sio_kgdb_hook(): request_resource failed\n");
+
+ return;
+}
+void
+txx9_sio_kdbg_init(unsigned int port_number)
+{
+ if (port_number == 1) {
+ txx9_sio_kgdb_hook(port_number, 38400);
+ kgdb_initialized = 1;
+ } else {
+ printk(KERN_ERR
+ "txx9_sio_kdbg_init(): Bad Port Number [%u] != [1]\n",
+ port_number);
+ }
+
+ return;
+}
+
+u8
+txx9_sio_kdbg_rd(void)
+{
+ unsigned int status, ch;
+ struct uart_txx9_port *up = &serial_txx9_ports[1];
+
+ if (!kgdb_initialized)
+ return 0;
+
+ while (1) {
+ status = sio_in(up, TXX9_SIDISR);
+ if (status & 0x1f) {
+ ch = sio_in(up, TXX9_SIRFIFO);
+ break;
+ }
+ }
+
+ return ch;
+}
+
+int
+txx9_sio_kdbg_wr(u8 ch)
+{
+ unsigned int status;
+ struct uart_txx9_port *up = &serial_txx9_ports[1];
+
+ if (!kgdb_initialized)
+ return 0;
+
+ while (1) {
+ status = sio_in(up, TXX9_SICISR);
+ if (status & TXX9_SICISR_TRDY) {
+ if (ch == '\n')
+ txx9_sio_kdbg_wr('\r');
+ sio_out(up, TXX9_SITFIFO, (u32)ch);
+
+ break;
+ }
+ }
+
+ return 1;
+}
+#endif /* CONFIG_KGDB */
+
+
+/******************************************************************************/
+/* END: KDBG Routines
*/
+/******************************************************************************/
+
static int __init serial_txx9_init(void)
{
int ret;
Index:
linux-2.6.24-rc7/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
===================================================================
---
linux-2.6.24-rc7.orig/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ linux-2.6.24-rc7/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -919,6 +919,12 @@ void __init toshiba_rbtx4927_setup(void)
early_printk_serial_txx9_console_setup();
}
#endif
+#ifdef CONFIG_KGDB
+ {
+ extern void txx9_sio_kdbg_init(unsigned int port_number);
+ txx9_sio_kdbg_init(1);
+ }
+#endif
#endif
#endif
|