linux-mips
[Top] [All Lists]

[PATCH] I8042: SNI RM support

To: linux-input@vger.kernel.org, linux-mips@linux-mips.org
Subject: [PATCH] I8042: SNI RM support
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Sun, 13 Jan 2008 00:39:04 +0100 (CET)
Cc: dmitry.torokhov@gmail.com
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
SNI RM200 don't have the i8042 controller connected to the EISA bus, but
have a second address range for onboard devices. This patch handles
the two possible address ranges for the i8042 on SNI RMs

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---

Please apply for 2.6.25.

 drivers/input/serio/i8042-snirm.h |   75 +++++++++++++++++++++++++++++++++++++
 drivers/input/serio/i8042.h       |    2 +
 2 files changed, 77 insertions(+), 0 deletions(-)

diff --git a/drivers/input/serio/i8042-snirm.h 
b/drivers/input/serio/i8042-snirm.h
new file mode 100644
index 0000000..57a66a3
--- /dev/null
+++ b/drivers/input/serio/i8042-snirm.h
@@ -0,0 +1,75 @@
+#ifndef _I8042_SNIRM_H
+#define _I8042_SNIRM_H
+
+#include <asm/sni.h>
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * Names.
+ */
+
+#define I8042_KBD_PHYS_DESC "onboard/serio0"
+#define I8042_AUX_PHYS_DESC "onboard/serio1"
+#define I8042_MUX_PHYS_DESC "onboard/serio%d"
+
+/*
+ * IRQs.
+ */
+static int i8042_kbd_irq = -1;
+static int i8042_aux_irq = -1;
+#define I8042_KBD_IRQ i8042_kbd_irq
+#define I8042_AUX_IRQ i8042_aux_irq
+
+static void __iomem *kbd_iobase;
+
+#define I8042_COMMAND_REG      (kbd_iobase + 0x64UL)
+#define I8042_DATA_REG         (kbd_iobase + 0x60UL)
+
+static inline int i8042_read_data(void)
+{
+       return readb(kbd_iobase + 0x60UL);
+}
+
+static inline int i8042_read_status(void)
+{
+       return readb(kbd_iobase + 0x64UL);
+}
+
+static inline void i8042_write_data(int val)
+{
+       writeb(val, kbd_iobase + 0x60UL);
+}
+
+static inline void i8042_write_command(int val)
+{
+       writeb(val, kbd_iobase + 0x64UL);
+}
+static inline int i8042_platform_init(void)
+{
+       /* RM200 is strange ... */
+       if (sni_brd_type == SNI_BRD_RM200) {
+               kbd_iobase = ioremap(0x16000000, 4);
+               i8042_kbd_irq = 33;
+               i8042_aux_irq = 44;
+       } else {
+               kbd_iobase = ioremap(0x14000000, 4);
+               i8042_kbd_irq = 1;
+               i8042_aux_irq = 12;
+       }
+       if (!kbd_iobase)
+               return -ENOMEM;
+
+       return 0;
+}
+
+static inline void i8042_platform_exit(void)
+{
+
+}
+
+#endif /* _I8042_SNIRM_H */
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index dd22d91..b5e9917 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -18,6 +18,8 @@
 #include "i8042-jazzio.h"
 #elif defined(CONFIG_SGI_IP22)
 #include "i8042-ip22io.h"
+#elif defined(CONFIG_SNI_RM)
+#include "i8042-snirm.h"
 #elif defined(CONFIG_PPC)
 #include "i8042-ppcio.h"
 #elif defined(CONFIG_SPARC)

<Prev in Thread] Current Thread [Next in Thread>