Slow transfer for loopback

To:	<linux-mips@linux-mips.org>
Subject:	Slow transfer for loopback
From:	"Ratin Rahman (mratin)" <mratin@cisco.com>
Date:	Fri, 14 Dec 2007 15:23:26 -0500
Authentication-results:	sj-dkim-2; header.From=mratin@cisco.com; dkim=pass ( sig from cisco.com/sjdkim2002 verified; );
Dkim-signature:	v=1; a=rsa-sha256; q=dns/txt; l=432; t=1197663816; x=1198527816; c=relaxed/simple; s=sjdkim2002; h=Content-Type:From:Subject:Content-Transfer-Encoding:MIME-Version; d=cisco.com; i=mratin@cisco.com; z=From:=20=22Ratin=20Rahman=20(mratin)=22=20<mratin@cisco.co m> \|Subject:=20Slow=20transfer=20for=20loopback \|Sender:=20; bh=lF8M6nJTXWCnUGAsGmNVO7+hjY6HFUd0rpiYtZT2iJg=; b=BLKvntRLvkroHDK8oVQUmzXpJaBFhQMpvZFqFbgeRlXFljSYUbArqHPR0e 6EHTNlG/LcOWXFayAM6rQSeXxQWkX9w5ThCNwYbSL4H12+G9vy2I5KSu3B8G TVaEVQ9iQ+;
In-reply-to:	<e6480a290706142014jedbe846g5594f2b546d88796@mail.gmail.com>
Original-recipient:	rfc822;linux-mips@linux-mips.org
References:	<e6480a290706142014jedbe846g5594f2b546d88796@mail.gmail.com>
Sender:	linux-mips-bounce@linux-mips.org
Thread-index:	Aceu+3eRgrIDbp9+SUKDz1eiP2iVCCPjFmwg
Thread-topic:	Slow transfer for loopback

Hello All, I am using Mipsel linux 2.6.10 kernel on IDT 79RC32H434 chip
which has integrated Ethernet MAC (100mbps). I am transfering  UDP/RTP
data (30 kbyte for an I frame, 2/3 kb for a p frame, splitted into 
1480 bytes of RTP packets) over the loopback address from one
application to another application. 
I am seeing accumulated delay in receiving the data. Anybody else
experienced similar problem? 

Ratin

<Prev in Thread]	Current Thread	[Next in Thread>
Slow transfer for loopback, Ratin Rahman (mratin) <=

Previous by Date:	Re: PCI resource unavailable on mips, Jon Dufresne
Next by Date:	Re: PCI resource unavailable on mips, Jon Dufresne
Previous by Thread:	Re: PCI resource unavailable on mips, Ralf Baechle
Next by Thread:	[PATCH][1/2][MIPS] remove unused struct bootloader_header, Yoichi Yuasa
Indexes:	[Date] [Thread] [Top] [All Lists]