> > Date: Thu, 6 Dec 2007 17:51:00 +0100
> > From: email@example.com
> > To: firstname.lastname@example.org
> > CC: email@example.com
> > Subject: Re: Bug in Au1x00 UART or USB drivers for 2.6 kernels?
> > Hi Nathan,
> > On Thu, Dec 06, 2007 at 04:41:23PM +0000, Nathan Eggan wrote:
> > > Can anyone see this?
> > Yes, your message came through clearly.
> > And to reply a little bit more on topic. I had also some strange
> > serial trouble with 2.6.16, but it dissapeared when I used
> > 184.108.40.206. The trouble I had was using 115200bps and for some strange
> > reason bytes would be missing on one of the interfaces. I had no
> > trouble on ttyS2, but ttyS0 would. Strange, but using 220.127.116.11 I
> > did not experience the same problems. I did not investigate the
> > real cause, but just wanted to let you know.
> > --
> > $ cat ~/.signature
> > Freddy Spierenburg <firstname.lastname@example.org> http://freddy.snarl.nl/
> > GnuPG: 0x7941D1E1=C948 5851 26D2 FA5C 39F1 E588 6F17 FD5D 7941 D1E1
> > $ # Please read http://www.ietf.org/rfc/rfc2015.txt before complain!
> Thanks Freddy! It's good to hear you folks can see this. (I hope you can
> see this response. M$'s crappy reply has converted all the original text to
> HTML escaped charactes. :( )
> I was reading up on the latest kernel changes you folks are implementing, and
> I noticed that new IRQ handlers are being coded into 2.6.23 and 2.6.24. So,
> perhaps that's the resolution that's required. I've been in the process of
> pulling down the latest kernel source and getting it up and running; so
> perhaps that'll fix everything for me.
> Thanks again.
> Connect and share in new ways with Windows Live.
You keep typing, we keep giving. Download Messenger and join the i’m Initiative