linux-mips
[Top] [All Lists]

Re: [SPAM] how to use memory before kernel load address?

To: zhuzhenhua <zzh.hust@gmail.com>
Subject: Re: [SPAM] how to use memory before kernel load address?
From: Markus Gothe <markus.gothe@27m.se>
Date: Tue, 20 Nov 2007 03:51:22 +0100
Cc: linux-mips <linux-mips@linux-mips.org>
In-reply-to: <50c9a2250711191706g40744ab2w2027124c4bc8dbbb@mail.gmail.com>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <50c9a2250711191706g40744ab2w2027124c4bc8dbbb@mail.gmail.com>
Sender: linux-mips-bounce@linux-mips.org
Are you using a MTD, if so just create a partition there.

//Markus

On 20 Nov 2007, at 02:06, zhuzhenhua wrote:

hello,all
i want to place my kernel loadaddr=0x81008000 and set EBASE=0x81000000, it workes. but there is still some memory usable before 0x81000000, for example from 0x80100000 ~ 0x80200000 i have try to pass param as mem=1M@1M mem=16M@16M to the kernel, it seems only take the 0x8000000 ~ kernel_end as reserved. is there any other options to set the memory useable? ( my kernel version is 2.6.14)
         thanks for any hints


zzh

Attachment: PGP.sig
Description: This is a digitally signed message part

<Prev in Thread] Current Thread [Next in Thread>