linux-mips
[Top] [All Lists]

[PATCH] dz.c: Rename the serial console structure

To: Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH] dz.c: Rename the serial console structure
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Fri, 19 Oct 2007 21:38:33 +0100 (BST)
Cc: linux-mips@linux-mips.org, linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
 Rename the serial console structure so that `modpost' does not complain 
about a reference to an "init" section -- "_console" is magic.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
---
 Tested with checkpatch.pl and at the run-time -- MIPS/Linux on a 
DECstation 5000/200.

 Please apply,

  Maciej

patch-mips-2.6.23-rc5-20070904-serial-dz-console-0
diff -up --recursive --new-file 
linux-mips-2.6.23-rc5-20070904.macro/drivers/serial/dz.c 
linux-mips-2.6.23-rc5-20070904/drivers/serial/dz.c
--- linux-mips-2.6.23-rc5-20070904.macro/drivers/serial/dz.c    2007-05-02 
04:56:10.000000000 +0000
+++ linux-mips-2.6.23-rc5-20070904/drivers/serial/dz.c  2007-09-18 
23:07:54.000000000 +0000
@@ -741,7 +741,7 @@ static int __init dz_console_setup(struc
 }
 
 static struct uart_driver dz_reg;
-static struct console dz_sercons = {
+static struct console dz_console = {
        .name   = "ttyS",
        .write  = dz_console_print,
        .device = uart_console_device,
@@ -755,7 +755,7 @@ static int __init dz_serial_console_init
 {
        if (!IOASIC) {
                dz_init_ports();
-               register_console(&dz_sercons);
+               register_console(&dz_console);
                return 0;
        } else
                return -ENXIO;
@@ -763,7 +763,7 @@ static int __init dz_serial_console_init
 
 console_initcall(dz_serial_console_init);
 
-#define SERIAL_DZ_CONSOLE      &dz_sercons
+#define SERIAL_DZ_CONSOLE      &dz_console
 #else
 #define SERIAL_DZ_CONSOLE      NULL
 #endif /* CONFIG_SERIAL_DZ_CONSOLE */

<Prev in Thread] Current Thread [Next in Thread>