| To: | rtc-linux@googlegroups.com |
|---|---|
| Subject: | Re: [rtc-linux] Re: [PATCH 2/4] RTC: make m41t80 driver can work with the SMBus adapters |
| From: | Alessandro Zummo <alessandro.zummo@towertech.it> |
| Date: | Tue, 2 Oct 2007 15:16:24 +0200 |
| Cc: | anemo@mba.ocn.ne.jp, rongkai.zhan@windriver.com, i2c@lm-sensors.org, linux-mips@linux-mips.org, ralf@linux-mips.org |
| In-reply-to: | <20071002.000616.31638007.anemo@mba.ocn.ne.jp> |
| Organization: | Tower Technologies |
| Original-recipient: | rfc822;linux-mips@linux-mips.org |
| References: | <46FF726E.4020200@windriver.com> <20071002.000616.31638007.anemo@mba.ocn.ne.jp> |
| Sender: | linux-mips-bounce@linux-mips.org |
On Tue, 02 Oct 2007 00:06:16 +0900 (JST) Atsushi Nemoto <anemo@mba.ocn.ne.jp> wrote: > > On Sun, 30 Sep 2007 17:54:54 +0800, Mark Zhan <rongkai.zhan@windriver.com> > wrote: > > This patch makes m41t80 RTC driver also can work with the SMBus adapters, > > which doesn't i2c_transfer() method. > > > > Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com> > > As Jean already said, your mailer corrupted your patch. > Also, please keep in mind the 80 column rule. [...] fwiw, I agree with Atsushi's comments. -- Best regards, Alessandro Zummo, Tower Technologies - Torino, Italy http://www.towertech.it |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [rtc-linux] Re: [PATCH 4/4] MIPS: Remove the legacy RTC codes of MIPS sibyte boards, Alessandro Zummo |
|---|---|
| Next by Date: | 2.6 Patch for AMD MIPS Alchemy au1550 I2C interface I2C, Chris David |
| Previous by Thread: | Re: [PATCH 2/4] RTC: make m41t80 driver can work with the SMBus adapters, Atsushi Nemoto |
| Next by Thread: | Re: Using PCI bridges on sgi-ip32 [was: Re: Tests of 2.6.23-rc8 on SGI O2], Maciej W. Rozycki |
| Indexes: | [Date] [Thread] [Top] [All Lists] |