linux-mips
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[PATCH 1/3] MTX1 : fix wrong ifdef leading to USB switch not powered

from [Florian Fainelli] [Permanent Link][Original]
To: blogic@openwrt.org, nbd@openwrt.org, linux-mips@linux-mips.org
Subject: [PATCH 1/3] MTX1 : fix wrong ifdef leading to USB switch not powered
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Tue, 25 Sep 2007 17:07:24 +0200
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
User-agent: KMail/1.9.7 
This patch fixes a wrong ifdef in the board setup code, leading to the GPIO 
pin not being pulled high, and thus the USB switch not being powered at all.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
--

Attachment: usb-power.patch
Description: Text document

Attachment: signature.asc
Description: This is a digitally signed message part.

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [PATCH 1/3] MTX1 : fix wrong ifdef leading to USB switch not powered, Florian Fainelli <=
Previous by Date:  Re: [PATCH 0/4] Rename BCM947XX into BCM47XX, Maciej W. Rozycki
Next by Date:  [PATCH 3/3] Au1000 : set the PCI controller IO base, Florian Fainelli
Previous by Thread:  [PATCH 0/4] Rename BCM947XX into BCM47XX, Aurelien Jarno
Next by Thread:  [PATCH 3/3] Au1000 : set the PCI controller IO base, Florian Fainelli
Indexes:  [Date] [Thread] [Top] [All Lists]