linux-mips
[Top] [All Lists]

[PATCH] NET_SB1250_MAC: Update Kconfig entry

To: Andrew Morton <akpm@linux-foundation.org>, Jeff Garzik <jgarzik@pobox.com>
Subject: [PATCH] NET_SB1250_MAC: Update Kconfig entry
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Fri, 14 Sep 2007 11:57:33 +0100 (BST)
Cc: netdev@vger.kernel.org, linux-mips@linux-mips.org, linux-kernel@vger.kernel.org
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
 The SB1250 network interfaces are Gigabit Ethernet ones.  Move the 
Kconfig entry to the appropriate section and add some help text.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
---
 It should be obvious; I hope the help text will be useful to somebody and 
will prevent from misclassifying the interface again in the future.

 Please apply,

  Maciej

patch-netdev-2.6.23-rc6-20070913-sb1250-mac-kconfig-0
diff -up --recursive --new-file 
linux-netdev-2.6.23-rc6-20070913.macro/drivers/net/Kconfig 
linux-netdev-2.6.23-rc6-20070913/drivers/net/Kconfig
--- linux-netdev-2.6.23-rc6-20070913.macro/drivers/net/Kconfig  2007-09-13 
17:27:52.000000000 +0000
+++ linux-netdev-2.6.23-rc6-20070913/drivers/net/Kconfig        2007-09-14 
00:02:05.000000000 +0000
@@ -466,10 +466,6 @@ config MIPS_AU1X00_ENET
          If you have an Alchemy Semi AU1X00 based system
          say Y.  Otherwise, say N.
 
-config NET_SB1250_MAC
-       tristate "SB1250 Ethernet support"
-       depends on SIBYTE_SB1xxx_SOC
-
 config SGI_IOC3_ETH
        bool "SGI IOC3 Ethernet"
        depends on PCI && SGI_IP27
@@ -2157,6 +2153,18 @@ config R8169_VLAN
          
          If in doubt, say Y.
 
+config NET_SB1250_MAC
+       tristate "SB1250 Gigabit Ethernet support"
+       depends on SIBYTE_SB1xxx_SOC
+       ---help---
+         This driver supports Gigabit Ethernet interfaces based on the
+         Broadcom SiByte family of System-On-a-Chip parts.  They include
+         the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
+         and BCM1480 chips.
+
+         To compile this driver as a module, choose M here: the module
+         will be called sb1250-mac.
+
 config SIS190
        tristate "SiS190/SiS191 gigabit ethernet support"
        depends on PCI

<Prev in Thread] Current Thread [Next in Thread>