linux-mips
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Tulip driver broken on Cobalt RaQ1 in 2.6

from [Martin Michlmayr] [Permanent Link][Original]
To: Peter Horton <phorton@bitbox.co.uk>
Subject: Re: Tulip driver broken on Cobalt RaQ1 in 2.6
From: Martin Michlmayr <tbm@cyrius.com>
Date: Fri, 24 Aug 2007 13:24:54 +0200
Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>, linux-mips@linux-mips.org
In-reply-to: <46CE9F03.7040207@bitbox.co.uk>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <20070823203757.GA25971@deprecation.cyrius.com> <20070824133656.4163c577.yoichi_yuasa@tripeaks.co.jp> <20070824080215.GA31646@deprecation.cyrius.com> <46CE9F03.7040207@bitbox.co.uk>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.5.13 (2006-08-11) 
* Peter Horton <phorton@bitbox.co.uk> [2007-08-24 10:04]:
> What does /proc/interrupts show after this ?

No interrupt for eth0:

uruk:~# cat /proc/interrupts
           CPU0
  2:          0          XT-PIC  cascade
  8:          0          XT-PIC  rtc0
 14:       1773          XT-PIC  ide0
 18:     199990            MIPS  timer
 20:          0            MIPS  eth0
 21:        582            MIPS  serial
 22:          0            MIPS  cascade

ERR:          0


> Does the networking work in CoLo ?

Yes.

The full boot log (including CoLo) is below.
-- 
Martin Michlmayr
http://www.cyrius.com/

Attachment: log
Description: Text document

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Kernel 2.6.23-rc3 build error, Ralf Baechle
Next by Date:  Re: Kernel 2.6.23-rc3 build error, Sunil Amitkumar Janki
Previous by Thread:  Re: Tulip driver broken on Cobalt RaQ1 in 2.6, Peter Horton
Next by Thread:  [PATCH 1/2] Replace CONFIG_USB_OHCI with CONFIG_USB_OHCI_HCD in a few overlooked files, Paolo 'Blaisorblade' Giarrusso
Indexes:  [Date] [Thread] [Top] [All Lists]