* Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> [2007-08-24 13:36]:
> What error occurs on Raq1?
There is no error, but I never get a DHCP response:
Listening on LPF/eth0/00:10:e0:00:27:5c
Sending on LPF/eth0/00:10:e0:00:27:5c
Sending on Socket/fallback/fallback-net
DHCPREQUEST on eth0 to 255.255.255.255 port 67
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
No DHCPOFFERS received.
> > Galileo: PCI retry count exceeded (06.0)
>
> I cannot find this line in current git.
It's in arch/mips/cobalt/irq.c
> Do you apply any patch for Debian kernel?
This is a pristine kernel from git (well, I had to apply your patch to
get IDE going).
--
Martin Michlmayr
http://www.cyrius.com/
|