On Tue, 21 Aug 2007 22:34:16 +0200
brm <brm@murphy.dk> wrote:
> Add back support for LASAT platforms.
>
> Signed-off-by: Brian Murphy <brian@murphy.dk>
<snip>
> diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig
> new file mode 100644
> index 0000000..1d2ee8a
> --- /dev/null
> +++ b/arch/mips/lasat/Kconfig
> @@ -0,0 +1,15 @@
> +config PICVUE
> + tristate "PICVUE LCD display driver"
> + depends on LASAT
> +
> +config PICVUE_PROC
> + tristate "PICVUE LCD display driver /proc interface"
> + depends on PICVUE
> +
> +config DS1603
> + bool "DS1603 RTC driver"
> + depends on LASAT
If you add new RTC driver, it should go to drivers/rtc.
> diff --git a/arch/mips/lasat/reset.c b/arch/mips/lasat/reset.c
> new file mode 100644
> index 0000000..9e22acf
> --- /dev/null
> +++ b/arch/mips/lasat/reset.c
> @@ -0,0 +1,69 @@
> +/*
> + * Thomas Horsten <thh@lasat.com>
> + * Copyright (C) 2000 LASAT Networks A/S.
> + *
> + * This program is free software; you can distribute it and/or modify it
> + * under the terms of the GNU General Public License (Version 2) as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> + * for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
> + *
> + * Reset the LASAT board.
> + */
> +#include <linux/kernel.h>
> +#include <linux/pm.h>
> +
> +#include <asm/reboot.h>
> +#include <asm/system.h>
> +#include <asm/lasat/lasat.h>
> +
> +#include "picvue.h"
> +#include "prom.h"
> +
> +static void lasat_machine_restart(char *command);
> +static void lasat_machine_halt(void);
> +
> +/* Used to set machine to boot in service mode via /proc interface */
> +int lasat_boot_to_service = 0;
> +
> +static void lasat_machine_restart(char *command)
> +{
> + local_irq_disable();
> +
> + if (lasat_boot_to_service) {
> + printk("machine_restart: Rebooting to service mode\n");
> + *(volatile unsigned int *)0xa0000024 = 0xdeadbeef;
> + *(volatile unsigned int *)0xa00000fc = 0xfedeabba;
> + }
> + *lasat_misc->reset_reg = 0xbedead;
> + for (;;) ;
> +}
> +
> +#define MESSAGE "System halted"
> +static void lasat_machine_halt(void)
> +{
> + local_irq_disable();
> +
> + /* Disable interrupts and loop forever */
> + printk(KERN_NOTICE MESSAGE "\n");
alreade displayed in kernel_halt().
> diff --git a/include/asm-mips/lasat/lasatint.h
> b/include/asm-mips/lasat/lasatint.h
> new file mode 100644
> index 0000000..065474f
> --- /dev/null
> +++ b/include/asm-mips/lasat/lasatint.h
> @@ -0,0 +1,12 @@
> +#define LASATINT_END 16
> +
> +/* lasat 100 */
> +#define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000))
> +#define LASAT_INT_MASK_REG_100 (KSEG1ADDR(0x1c890000))
> +#define LASATINT_MASK_SHIFT_100 0
> +
> +/* lasat 200 */
> +#define LASAT_INT_STATUS_REG_200 (KSEG1ADDR(0x1104003c))
> +#define LASAT_INT_MASK_REG_200 (KSEG1ADDR(0x1104003c))
> +#define LASATINT_MASK_SHIFT_200 16
> +
Only used in arch/mips/lasat/interrupt.c .
Please move to interrupt.c .
> diff --git a/include/asm-mips/lasat/picvue.h b/include/asm-mips/lasat/picvue.h
> new file mode 100644
> index 0000000..42a492e
> --- /dev/null
> +++ b/include/asm-mips/lasat/picvue.h
> @@ -0,0 +1,15 @@
> +/* Lasat 100 */
> +#define PVC_REG_100 KSEG1ADDR(0x1c820000)
> +#define PVC_DATA_SHIFT_100 0
> +#define PVC_DATA_M_100 0xFF
> +#define PVC_E_100 (1 << 8)
> +#define PVC_RW_100 (1 << 9)
> +#define PVC_RS_100 (1 << 10)
> +
> +/* Lasat 200 */
> +#define PVC_REG_200 KSEG1ADDR(0x11000000)
> +#define PVC_DATA_SHIFT_200 24
> +#define PVC_DATA_M_200 (0xFF << PVC_DATA_SHIFT_200)
> +#define PVC_E_200 (1 << 16)
> +#define PVC_RW_200 (1 << 17)
> +#define PVC_RS_200 (1 << 18)
Only used in arch/mips/lasat/setup.c .
Please move to setup.c or arch/mips/lasat/picvue.h .
> diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h
> new file mode 100644
> index 0000000..9e88c76
> --- /dev/null
> +++ b/include/asm-mips/lasat/serial.h
> @@ -0,0 +1,13 @@
> +#include <asm/lasat/lasat.h>
> +
> +/* Lasat 100 boards serial configuration */
> +#define LASAT_BASE_BAUD_100 ( 7372800 / 16 )
> +#define LASAT_UART_REGS_BASE_100 0x1c8b0000
> +#define LASAT_UART_REGS_SHIFT_100 2
> +#define LASATINT_UART_100 8
> +
> +/* * LASAT 200 boards serial configuration */
> +#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12)
> +#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300)
> +#define LASAT_UART_REGS_SHIFT_200 3
> +#define LASATINT_UART_200 13
Only used in arch/mips/lasat/serial.c .
Please move to serial.c.
> diff --git a/include/asm-mips/mach-lasat/mach-gt64120.h
> b/include/asm-mips/mach-lasat/mach-gt64120.h
> new file mode 100644
> index 0000000..1a9ad45
> --- /dev/null
> +++ b/include/asm-mips/mach-lasat/mach-gt64120.h
> @@ -0,0 +1,27 @@
> +/*
> + * This is a direct copy of the ev96100.h file, with a global
> + * search and replace. The numbers are the same.
> + *
> + * The reason I'm duplicating this is so that the 64120/96100
> + * defines won't be confusing in the source code.
> + */
> +#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H
> +#define _ASM_GT64120_LASAT_GT64120_DEP_H
> +
> +/*
> + * GT64120 config space base address on Lasat 100
> + */
> +#define GT64120_BASE (KSEG1ADDR(0x14000000))
> +
> +/*
> + * PCI Bus allocation
> + *
> + * (Guessing ...)
> + */
> +#define GT_PCI_MEM_BASE 0x12000000UL
> +#define GT_PCI_MEM_SIZE 0x02000000UL
> +#define GT_PCI_IO_BASE 0x10000000UL
> +#define GT_PCI_IO_SIZE 0x02000000UL
There are already defined in include/asm-mips/gt64120.h
Please use default definitions.
> +#define GT_ISA_IO_BASE PCI_IO_BASE
Not used.
> +#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */
> diff --git a/include/asm-mips/nile4.h b/include/asm-mips/nile4.h
> new file mode 100644
> index 0000000..c3ca959
> --- /dev/null
> +++ b/include/asm-mips/nile4.h
> @@ -0,0 +1,310 @@
> +/*
> + * asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions
<snip>
> + /*
> + * Interrupt Programming
> + */
> +
> +#define NUM_I8259_INTERRUPTS 16
> +#define NUM_NILE4_INTERRUPTS 16
> +
> +#define IRQ_I8259_CASCADE NILE4_INT_INTE
> +#define is_i8259_irq(irq) ((irq) < NUM_I8259_INTERRUPTS)
> +#define nile4_to_irq(n) ((n)+NUM_I8259_INTERRUPTS)
> +#define irq_to_nile4(n) ((n)-NUM_I8259_INTERRUPTS)
> +
> +extern void nile4_map_irq(int nile4_irq, int cpu_irq);
> +extern void nile4_map_irq_all(int cpu_irq);
> +extern void nile4_enable_irq(unsigned int nile4_irq);
> +extern void nile4_disable_irq(unsigned int nile4_irq);
> +extern void nile4_disable_irq_all(void);
> +extern u16 nile4_get_irq_stat(int cpu_irq);
> +extern void nile4_enable_irq_output(int cpu_irq);
> +extern void nile4_disable_irq_output(int cpu_irq);
> +extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
> +extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
> +extern void nile4_clear_irq(int nile4_irq);
> +extern void nile4_clear_irq_mask(u32 mask);
> +extern u8 nile4_i8259_iack(void);
> +extern void nile4_dump_irq_status(void); /* Debug */
nile4 IRQ functions don't exist.
Yoichi
|