linux-mips
[Top] [All Lists]

[PATCH][MIPS] more removal Momenco Ocelot

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH][MIPS] more removal Momenco Ocelot
From: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Date: Mon, 30 Jul 2007 23:46:42 +0900
Cc: yoichi_yuasa@tripeaks.co.jp, linux-mips <linux-mips@linux-mips.org>
Organization: TriPeaks Corporation
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
more removal Momenco Ocelot

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>

diff -pruN -X mips/Documentation/dontdiff mips-orig/arch/mips/Kconfig 
mips/arch/mips/Kconfig
--- mips-orig/arch/mips/Kconfig 2007-07-30 23:13:17.627092000 +0900
+++ mips/arch/mips/Kconfig      2007-07-30 23:13:24.579526500 +0900
@@ -811,20 +811,6 @@ config EMMA2RH
 config SERIAL_RM9000
        bool
 
-#
-# Unfortunately not all GT64120 systems run the chip at the same clock.
-# As the user for the clock rate and try to minimize the available options.
-#
-choice
-       prompt "Galileo Chip Clock"
-       depends on MOMENCO_OCELOT
-       default SYSCLK_100 if MOMENCO_OCELOT
-
-config SYSCLK_100
-       bool "100" if MOMENCO_OCELOT
-
-endchoice
-
 config ARC32
        bool
 
diff -pruN -X mips/Documentation/dontdiff mips-orig/drivers/mtd/maps/Kconfig 
mips/drivers/mtd/maps/Kconfig
--- mips-orig/drivers/mtd/maps/Kconfig  2007-07-30 23:13:48.817041250 +0900
+++ mips/drivers/mtd/maps/Kconfig       2007-07-30 23:13:24.591527250 +0900
@@ -392,14 +392,6 @@ config MTD_TQM834x
          TQ Components TQM834x boards. If you have one of these boards
          and would like to use the flash chips on it, say 'Y'.
 
-config MTD_OCELOT
-       tristate "Momenco Ocelot boot flash device"
-       depends on MOMENCO_OCELOT
-       help
-         This enables access routines for the boot flash device and for the
-         NVRAM on the Momenco Ocelot board. If you have one of these boards
-         and would like access to either of these, say 'Y'.
-
 config MTD_SOLUTIONENGINE
        tristate "CFI Flash device mapped on Hitachi SolutionEngine"
        depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
diff -pruN -X mips/Documentation/dontdiff mips-orig/drivers/mtd/maps/Makefile 
mips/drivers/mtd/maps/Makefile
--- mips-orig/drivers/mtd/maps/Makefile 2007-07-30 23:13:48.817041250 +0900
+++ mips/drivers/mtd/maps/Makefile      2007-07-30 23:13:24.939549000 +0900
@@ -43,7 +43,6 @@ obj-$(CONFIG_MTD_SUN_UFLASH)  += sun_ufla
 obj-$(CONFIG_MTD_VMAX)         += vmax301.o
 obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
 obj-$(CONFIG_MTD_DBOX2)                += dbox2-flash.o
-obj-$(CONFIG_MTD_OCELOT)       += ocelot.o
 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
 obj-$(CONFIG_MTD_PCI)          += pci.o
 obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
diff -pruN -X mips/Documentation/dontdiff mips-orig/drivers/mtd/maps/ocelot.c 
mips/drivers/mtd/maps/ocelot.c
--- mips-orig/drivers/mtd/maps/ocelot.c 2007-07-30 23:13:48.829042000 +0900
+++ mips/drivers/mtd/maps/ocelot.c      1970-01-01 09:00:00.000000000 +0900
@@ -1,175 +0,0 @@
-/*
- * $Id: ocelot.c,v 1.17 2005/11/07 11:14:27 gleixner Exp $
- *
- * Flash on Momenco Ocelot
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#define OCELOT_PLD 0x2c000000
-#define FLASH_WINDOW_ADDR 0x2fc00000
-#define FLASH_WINDOW_SIZE 0x00080000
-#define FLASH_BUSWIDTH 1
-#define NVRAM_WINDOW_ADDR 0x2c800000
-#define NVRAM_WINDOW_SIZE 0x00007FF0
-#define NVRAM_BUSWIDTH 1
-
-static unsigned int cacheflush = 0;
-
-static struct mtd_info *flash_mtd;
-static struct mtd_info *nvram_mtd;
-
-static void ocelot_ram_write(struct mtd_info *mtd, loff_t to, size_t len, 
size_t *retlen, const u_char *buf)
-{
-        struct map_info *map = mtd->priv;
-       size_t done = 0;
-
-       /* If we use memcpy, it does word-wide writes. Even though we told the
-          GT64120A that it's an 8-bit wide region, word-wide writes don't work.
-          We end up just writing the first byte of the four to all four bytes.
-          So we have this loop instead */
-       *retlen = len;
-       while(len) {
-               __raw_writeb(*(unsigned char *) from, map->virt + to);
-               from++;
-               to++;
-               len--;
-       }
-}
-
-static struct mtd_partition *parsed_parts;
-
-struct map_info ocelot_flash_map = {
-       .name = "Ocelot boot flash",
-       .size = FLASH_WINDOW_SIZE,
-       .bankwidth = FLASH_BUSWIDTH,
-       .phys = FLASH_WINDOW_ADDR,
-};
-
-struct map_info ocelot_nvram_map = {
-       .name = "Ocelot NVRAM",
-       .size = NVRAM_WINDOW_SIZE,
-       .bankwidth = NVRAM_BUSWIDTH,
-       .phys = NVRAM_WINDOW_ADDR,
-};
-
-static const char *probes[] = { "RedBoot", NULL };
-
-static int __init init_ocelot_maps(void)
-{
-       void *pld;
-       int nr_parts;
-       unsigned char brd_status;
-
-               printk(KERN_INFO "Momenco Ocelot MTD mappings: Flash 0x%x at 
0x%x, NVRAM 0x%x at 0x%x\n",
-              FLASH_WINDOW_SIZE, FLASH_WINDOW_ADDR, NVRAM_WINDOW_SIZE, 
NVRAM_WINDOW_ADDR);
-
-       /* First check whether the flash jumper is present */
-       pld = ioremap(OCELOT_PLD, 0x10);
-       if (!pld) {
-               printk(KERN_NOTICE "Failed to ioremap Ocelot PLD\n");
-               return -EIO;
-       }
-       brd_status = readb(pld+4);
-       iounmap(pld);
-
-       /* Now ioremap the NVRAM space */
-       ocelot_nvram_map.virt = ioremap_nocache(NVRAM_WINDOW_ADDR, 
NVRAM_WINDOW_SIZE);
-       if (!ocelot_nvram_map.virt) {
-               printk(KERN_NOTICE "Failed to ioremap Ocelot NVRAM space\n");
-               return -EIO;
-       }
-
-       simple_map_init(&ocelot_nvram_map);
-
-       /* And do the RAM probe on it to get an MTD device */
-       nvram_mtd = do_map_probe("map_ram", &ocelot_nvram_map);
-       if (!nvram_mtd) {
-               printk("NVRAM probe failed\n");
-               goto fail_1;
-       }
-       nvram_mtd->owner = THIS_MODULE;
-       nvram_mtd->erasesize = 16;
-       /* Override the write() method */
-       nvram_mtd->write = ocelot_ram_write;
-
-       /* Now map the flash space */
-       ocelot_flash_map.virt = ioremap_nocache(FLASH_WINDOW_ADDR, 
FLASH_WINDOW_SIZE);
-       if (!ocelot_flash_map.virt) {
-               printk(KERN_NOTICE "Failed to ioremap Ocelot flash space\n");
-               goto fail_2;
-       }
-       /* Now the cached version */
-       ocelot_flash_map.cached = (unsigned long)__ioremap(FLASH_WINDOW_ADDR, 
FLASH_WINDOW_SIZE, 0);
-
-       simple_map_init(&ocelot_flash_map);
-
-       /* Only probe for flash if the write jumper is present */
-       if (brd_status & 0x40) {
-               flash_mtd = do_map_probe("jedec", &ocelot_flash_map);
-       } else {
-               printk(KERN_NOTICE "Ocelot flash write jumper not present. 
Treating as ROM\n");
-       }
-       /* If that failed or the jumper's absent, pretend it's ROM */
-       if (!flash_mtd) {
-               flash_mtd = do_map_probe("map_rom", &ocelot_flash_map);
-               /* If we're treating it as ROM, set the erase size */
-               if (flash_mtd)
-                       flash_mtd->erasesize = 0x10000;
-       }
-       if (!flash_mtd)
-               goto fail3;
-
-       add_mtd_device(nvram_mtd);
-
-       flash_mtd->owner = THIS_MODULE;
-       nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0);
-
-       if (nr_parts > 0)
-               add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
-       else
-               add_mtd_device(flash_mtd);
-
-       return 0;
-
- fail3:
-       iounmap((void *)ocelot_flash_map.virt);
-       if (ocelot_flash_map.cached)
-                       iounmap((void *)ocelot_flash_map.cached);
- fail_2:
-       map_destroy(nvram_mtd);
- fail_1:
-       iounmap((void *)ocelot_nvram_map.virt);
-
-       return -ENXIO;
-}
-
-static void __exit cleanup_ocelot_maps(void)
-{
-       del_mtd_device(nvram_mtd);
-       map_destroy(nvram_mtd);
-       iounmap((void *)ocelot_nvram_map.virt);
-
-       if (parsed_parts)
-               del_mtd_partitions(flash_mtd);
-       else
-               del_mtd_device(flash_mtd);
-       map_destroy(flash_mtd);
-       iounmap((void *)ocelot_flash_map.virt);
-       if (ocelot_flash_map.cached)
-               iounmap((void *)ocelot_flash_map.cached);
-}
-
-module_init(init_ocelot_maps);
-module_exit(cleanup_ocelot_maps);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>");
-MODULE_DESCRIPTION("MTD map driver for Momenco Ocelot board");
diff -pruN -X mips/Documentation/dontdiff mips-orig/include/asm-mips/bootinfo.h 
mips/include/asm-mips/bootinfo.h
--- mips-orig/include/asm-mips/bootinfo.h       2007-07-30 23:14:33.699846250 
+0900
+++ mips/include/asm-mips/bootinfo.h    2007-07-30 23:13:24.947549500 +0900
@@ -99,16 +99,6 @@
 #define  MACH_COSINE_ORION     0
 
 /*
- * Valid machtype for group MOMENCO
- */
-#define MACH_GROUP_MOMENCO     12      /* Momentum Boards              */
-#define  MACH_MOMENCO_OCELOT   0
-#define  MACH_MOMENCO_OCELOT_G 1       /* no more supported (may 2007) */
-#define  MACH_MOMENCO_OCELOT_C 2       /* no more supported (jun 2007) */
-#define  MACH_MOMENCO_JAGUAR_ATX 3     /* no more supported (may 2007) */
-#define  MACH_MOMENCO_OCELOT_3 4
-
-/*
  * Valid machtype for group PHILIPS
  */
 #define MACH_GROUP_PHILIPS     14
diff -pruN -X mips/Documentation/dontdiff 
mips-orig/include/asm-mips/mach-ocelot/mach-gt64120.h 
mips/include/asm-mips/mach-ocelot/mach-gt64120.h
--- mips-orig/include/asm-mips/mach-ocelot/mach-gt64120.h       2007-07-30 
23:14:34.419891250 +0900
+++ mips/include/asm-mips/mach-ocelot/mach-gt64120.h    1970-01-01 
09:00:00.000000000 +0900
@@ -1,30 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_GT64120_MOMENCO_OCELOT_GT64120_DEP_H
-#define _ASM_GT64120_MOMENCO_OCELOT_GT64120_DEP_H
-
-/*
- * PCI address allocation
- */
-#define GT_PCI_MEM_BASE        (0x22000000UL)
-#define GT_PCI_MEM_SIZE        GT_DEF_PCI0_MEM0_SIZE
-#define GT_PCI_IO_BASE (0x20000000UL)
-#define GT_PCI_IO_SIZE GT_DEF_PCI0_IO_SIZE
-
-extern unsigned long gt64120_base;
-
-#define GT64120_BASE   (gt64120_base)
-
-/*
- * GT timer irq
- */
-#define        GT_TIMER                6
-
-#endif  /* _ASM_GT64120_MOMENCO_OCELOT_GT64120_DEP_H */

<Prev in Thread] Current Thread [Next in Thread>
  • [PATCH][MIPS] more removal Momenco Ocelot, Yoichi Yuasa <=