linux-mips
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [PATCH 4/5] ne: MIPS: Use platform_driver for ne on RBTX49XX

from [Ralf Baechle] [Permanent Link][Original]
To: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Subject: Re: [PATCH 4/5] ne: MIPS: Use platform_driver for ne on RBTX49XX
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 1 May 2007 07:31:34 +0100
Cc: linux-mips@linux-mips.org, netdev@vger.kernel.org, jeff@garzik.org, sshtylyov@ru.mvista.com, akpm@linux-foundation.org
In-reply-to: <20070501.002758.15250764.anemo@mba.ocn.ne.jp>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <20070501.002758.15250764.anemo@mba.ocn.ne.jp>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.4.2.2i 
On Tue, May 01, 2007 at 12:27:58AM +0900, Atsushi Nemoto wrote:

> This patch lets RBTX49XX boards use generic platform_driver interface
> for the ne driver.
> 
> * Use platform_device to pass ioaddr and irq to the ne driver.
> * Remove unnecessary ifdefs for RBTX49XX from the ne driver.
> * Make the ne driver selectable on these boards regardless of CONFIG_ISA
> 
> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>

Acked-by: Ralf Baechle <ralf@linux-mips.org>

  Ralf
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • Re: [PATCH 4/5] ne: MIPS: Use platform_driver for ne on RBTX49XX, Ralf Baechle <=
Next by Date:  [PATCH] Use do_div for a subtract loop, Thiemo Seufer
Next by Thread:  [PATCH] Use do_div for a subtract loop, Thiemo Seufer
Indexes:  [Date] [Thread] [Top] [All Lists]