linux-mips
[Top] [All Lists]

[PATCH 3/16] Kconfig update for lemote fulong mini-PC

To: "linux-mips@linux-mips.org" <linux-mips@linux-mips.org>
Subject: [PATCH 3/16] Kconfig update for lemote fulong mini-PC
From: "zhangfx@lemote.com" <zhangfx@lemote.com>
Date: Wed, 4 Apr 2007 14:38:18 +0000
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Signed-off-by: Fuxin Zhang <zhangfx@lemote.com>
---
 arch/mips/Kconfig |   37 +++++++++++++++++++++++++++++++++++++
 1 files changed, 37 insertions(+), 0 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 338bfa3..cedb0fa 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -16,6 +16,26 @@ choice
        prompt "System type"
        default SGI_IP22
 
+config LEMOTE_FULONG
+       bool "Support for Lemote's fulong mini-PC"
+       select SYS_HAS_CPU_LOONGSON2
+       select DMA_NONCOHERENT
+       select BOOT_ELF32
+       select BOARD_SCACHE
+       select HW_HAS_PCI
+       select I8259
+       select ISA
+       select IRQ_CPU
+       select SYS_SUPPORTS_32BIT_KERNEL
+       select SYS_SUPPORTS_64BIT_KERNEL
+       select SYS_SUPPORTS_LITTLE_ENDIAN
+       select SYS_SUPPORTS_HIGHMEM
+       select SYS_HAS_EARLY_PRINTK
+       select GENERIC_HARDIRQS_NO__DO_IRQ
+       help
+        Lemote Fulong mini-PC board, which uses Chinese Loongson-2E CPU and a 
fpga north bridge 
+
+
 config MIPS_MTX1
        bool "4G Systems MTX-1 board"
        select DMA_NONCOHERENT
@@ -1142,6 +1162,13 @@ choice
        prompt "CPU type"
        default CPU_R4X00
 
+config CPU_LOONGSON2   
+       bool "LOONGSON2"
+       depends on SYS_HAS_CPU_LOONGSON2
+       select CPU_SUPPORTS_32BIT_KERNEL
+       select CPU_SUPPORTS_64BIT_KERNEL
+       select CPU_SUPPORTS_HIGHMEM
+
 config CPU_MIPS32_R1
        bool "MIPS32 Release 1"
        depends on SYS_HAS_CPU_MIPS32_R1
@@ -1352,6 +1379,9 @@ config CPU_SB1
 
 endchoice
 
+config SYS_HAS_CPU_LOONGSON2
+       bool
+
 config SYS_HAS_CPU_MIPS32_R1
        bool
 
@@ -1681,6 +1711,13 @@ config CPU_HAS_SMARTMIPS
 config CPU_HAS_WB
        bool
 
+config 64BIT_CONTEXT
+       bool "Save 64bit integer registers" if CPU_LOONGSON2 && 32BIT
+       help
+         Loongson2 CPU is 64bit , when used in 32BIT mode, its integer 
registers
+         can still be accessed as 64bit, mainly for multimedia instructions. 
We must have
+         all 64bit save/restored to make sure those instructions to get 
correct result.
+
 #
 # Vectored interrupt mode is an R2 feature
 #
-- 
1.4.4.4


<Prev in Thread] Current Thread [Next in Thread>
  • [PATCH 3/16] Kconfig update for lemote fulong mini-PC, zhangfx@lemote.com <=