linux-mips
[Top] [All Lists]

[CHAR] Wire up DEC serial drivers in Kconfig

To: Linus Torvalds <torvalds@linux-foundation.org>
Subject: [CHAR] Wire up DEC serial drivers in Kconfig
From: Ralf Baechle <ralf@linux-mips.org>
Date: Wed, 28 Mar 2007 03:37:24 +0100
Cc: Adrian Bunk <bunk@stusta.de>, "Robert P. J. Day" <rpjday@mindspring.com>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, linux-mips@linux-mips.org
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.4.2.2i
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/char/Kconfig |   33 +++++++++++++++++++++++++++++++++

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 3429ece..d0c978f 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -386,6 +386,39 @@ config AU1000_SERIAL_CONSOLE
          If you have an Alchemy AU1000 processor (MIPS based) and you want
          to use a console on a serial port, say Y.  Otherwise, say N.
 
+config SERIAL_DEC
+       bool "DECstation serial support"
+       depends on MACH_DECSTATION
+       default y
+       help
+         This selects whether you want to be asked about drivers for
+         DECstation serial ports.
+
+         Note that the answer to this question won't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the questions about DECstation serial ports.
+
+config SERIAL_DEC_CONSOLE
+       bool "Support for console on a DECstation serial port"
+       depends on SERIAL_DEC
+       default y
+       help
+         If you say Y here, it will be possible to use a serial port as the
+         system console (the system console is the device which receives all
+         kernel messages and warnings and which allows logins in single user
+         mode).  Note that the firmware uses ttyS0 as the serial console on
+         the Maxine and ttyS2 on the others.
+
+         If unsure, say Y.
+
+config ZS
+       bool "Z85C30 Serial Support"
+       depends on SERIAL_DEC
+       default y
+       help
+         Documentation on the Zilog 85C350 serial communications controller
+         is downloadable at <http://www.zilog.com/pdfs/serial/z85c30.pdf>
+
 config A2232
        tristate "Commodore A2232 serial support (EXPERIMENTAL)"
        depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP

<Prev in Thread] Current Thread [Next in Thread>