How is the au1000_gpio char driver used?

To:	linux-mips@linux-mips.org
Subject:	How is the au1000_gpio char driver used?
From:	"s c" <steve.carren@gmail.com>
Date:	Tue, 26 Sep 2006 11:39:41 -0400
Domainkey-signature:	a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=LDlERwELwp9QUv6a6tKskPD3JLokFBatLgDHDfNmHxIictYcXQ6IyyxdO480ldskJybHuHmzBPnnqGJcRgq6bogw86kk9ZX189QbHLOLLJJTfpl4BknSH595dSOnCbGdqbmbk/xhwWJdtOS1rJgghYLErEROtswsZyg20YA3E/Q=
Original-recipient:	rfc822;linux-mips@linux-mips.org
Sender:	linux-mips-bounce@linux-mips.org

Hello All,

I would like to use the au1000_gpio char driver to blink some status
lights. Specifically, I would like to control the hex leds on the
dbau1500 development board. Preferably via shell script.

Any help would be appreciated.

Thanks

<Prev in Thread]	Current Thread	[Next in Thread>
How is the au1000_gpio char driver used?, s c <= Re: How is the au1000_gpio char driver used?, Freddy Spierenburg Re: How is the au1000_gpio char driver used?, s c

Previous by Date:	readb() and writeb() timings, Freddy Spierenburg
Next by Date:	Re: [PATCH 2/3] [MIPS] lockdep: add STACKTRACE_SUPPORT and enable LOCKDEP_SUPPORT, Franck Bui-Huu
Previous by Thread:	readb() and writeb() timings, Freddy Spierenburg
Next by Thread:	Re: How is the au1000_gpio char driver used?, Freddy Spierenburg
Indexes:	[Date] [Thread] [Top] [All Lists]