On 06/09/06 21:47 +0200, Tomasz Chmielewski wrote:
> Tomasz Chmielewski wrote:
> >I have a tiny router (ASUS WL-500g deluxe, MIPS CPU, 32 MB RAM, 2x
> >USB2), and would like to make it work with a USB DSL modem.
> >Right now, it's running Debian and kernel 2.6.17, and boots off a
> >My problem is, that it only sees USB storage devices (USB sticks etc.).
> >When I connect other devices (USB modem, webcam, microphone, keyboard,
> >printer etc.), they are not detected.
> >By "not detected" I mean there are no "dmesg" entries with the device
> >name, and no devices, other than "USB storage", listed with "lsusb".
> >I even compiled "USB verbose logging" in, but it only gives me a couple
> >of debug infos, no clue why the devices doesn't show up.
> It looks that something's borked in 2.6.17 kernel.
> When I load ohci module, it complains a lot:
You say Ohci, but output is from Uhci, and the output in the first
e-mail is from Ehci. :-)
> USB Universal Host Controller Interface driver v3.0
> PCI: Fixing up device 0000:01:02.0
> uhci_hcd 0000:01:02.0: no i/o regions available
> uhci_hcd 0000:01:02.0: init 0000:01:02.0 fail, -16
> uhci_hcd: probe of 0000:01:02.0 failed with error -16
> PCI: Fixing up device 0000:01:02.1
> uhci_hcd 0000:01:02.1: no i/o regions available
> uhci_hcd 0000:01:02.1: init 0000:01:02.1 fail, -16
> uhci_hcd: probe of 0000:01:02.1 failed with error -16
> With 2.4.30 kernel, ohci module loads fine, and I can use all USB devices:
> # lsusb
> Bus 002 Device 001: ID 0000:0000
> Bus 001 Device 001: ID 0000:0000
> Bus 001 Device 004: ID 03f0:3011 Hewlett-Packard
> Bus 001 Device 003: ID 0471:0310 Philips PCVC730K WebCam [pwc]
> Ideas what can be wrong?
> Tomasz Chmielewski