linux-mips
[Top] [All Lists]

Re: Problem booting malta with 2.4.33-rc1

To: "Kishore K" <hellokishore@gmail.com>
Subject: Re: Problem booting malta with 2.4.33-rc1
From: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Date: Mon, 7 Aug 2006 18:10:20 +0900
Cc: linux-mips@linux-mips.org
In-reply-to: <f07e6e0608062331p4ef621afn67764067f5b822c2@mail.gmail.com>
Organization: TriPeaks Corporation
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <f07e6e0608062331p4ef621afn67764067f5b822c2@mail.gmail.com>
Sender: linux-mips-bounce@linux-mips.org
Hi,

On Mon, 7 Aug 2006 12:01:43 +0530
"Kishore K" <hellokishore@gmail.com> wrote:

> Hi,
> When trying to bring up Malta (4KC) board with 2.4.33-rc1 from linux-mips,
> the kernel crashes. Boot log is enclosed along with this mail. I am using
> the tool chain based on gcc 3.3.6, uClibc-0.9.27, binutils 2.14.90.0.8.
> When the same tool chain is used for 2.4.31 kernel, the board comes up
> without any issues.
> 
> Observed the same issue with tool chain based on gcc 3.4.4, uClibc-0.9.28,
> binutils 2.15.94. Same result is observed even with  Malta 24KEC and
> 2.4.33-rc1 kernel.
> 
> Does any one observe the same behaviour ? Am I missing something obvious
> here ?

I have seen the same problem with gcc 3.4.4 mipssde-6.03.01-20051114 and
 binutils 2.15.94 mipssde-6.03.01-20051114 with 2.6.6 kernel.
gcc 3.3.2 and binutils 2.14.90.0.8 20040114 has no problem with same kernel.

Yoichi

<Prev in Thread] Current Thread [Next in Thread>