linux-mips
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Problem booting malta with 2.4.33-rc1

from [Kishore K] [Permanent Link][Original]
To: "linux-mips@linux-mips.org" <linux-mips@linux-mips.org>
Subject: Problem booting malta with 2.4.33-rc1
From: "Kishore K" <hellokishore@gmail.com>
Date: Mon, 7 Aug 2006 12:01:43 +0530
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=d1qI5B2HGYrdrv1nwR629jurCOq7/Jd9/owjIdMYNWmG91nbZOae6/PhwdHmALKzayaiAOihLA8f32QdT6HAKKJ041TlOny2RLSu11is8aHEmsrjvp4HrzzJKx6TrUzqhyDknOEikEPZzmcLocNPhJh0Ax0JVmZIcogg3uF2Lg0=
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Hi,
When trying to bring up Malta (4KC) board with 2.4.33-rc1 from linux-mips, the kernel crashes. Boot log is enclosed along with this mail. I am using the tool chain based on gcc 3.3.6, uClibc-0.9.27, binutils 2.14.90.0.8 .  When the same tool chain is used for 2.4.31 kernel, the board comes up without any issues.

Observed the same issue with tool chain based on gcc 3.4.4, uClibc-0.9.28, binutils 2.15.94. Same result is observed even with  Malta 24KEC and 2.4.33-rc1 kernel.

Does any one observe the same behaviour ? Am I missing something obvious here ?

thanks,
--kishore

Attachment: 4kc-3.3.6.log
Description: Binary data

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: EXT2-fs error, WCT Tang
Next by Date:  Re: Problem booting malta with 2.4.33-rc1, Yoichi Yuasa
Previous by Thread:  EXT2-fs error, Kiah Tang
Next by Thread:  Re: Problem booting malta with 2.4.33-rc1, Yoichi Yuasa
Indexes:  [Date] [Thread] [Top] [All Lists]